CHRIST UNIVERSITY

of the Art

Advanced Machining Laboratory

The laboratory is equipped with advanced automated machines and robots to cater the needs of industrial solutions and defines the problem encountered in motion planning and machining conditions.The current research activities include parametric optimization of high speed machining of Inconel steel using CNC milling machine and CNC turning machine, analysis and optimization of the end effector/gripper movement using KUKA robot, parametric optimization of hard machining of Inconel 718 using coated tools. This laboratory is also equipped with KUKA KR6 R900 robot, a well advanced robot which can be used to grip and manipulate.

BOSCH AUTOMOTIVE WORKSHOP

BOSCH Automotive workshop constitutes of Wheel balancing system, 3D Wheel Alignment machine, Vehicle fork lift, Tyre Inflator, Engine Electrical Circuit management system, Tyre fitting machine, engine diagnoses, injector test and Cabin Air Conditioning maintenance machine.

The state of the art test facility available in the lab is one of its unique kind and helps students to have better understanding of the vehicles electrical, and wheel and tyre system maintenance.

Energy Conversion Laboratory

The Energy Conversion Engineering laboratory is equipped with facilities for regular academic purposes, research and consultancy works. This laboratory consists all types of engine like single cylinder, multi-cylinder SI & CI engines connected with mechanical, electrical and hydraulic dynamometers. Engines with EGR, turbocharge, with VCR, with facility to run on duel fuel are available. The laboratory has a sophisticated computerized research engine, exhaust gas analyser, smoke meter and fuel testing facilities.

FESTO AUTOMATION TRAINING CENTRE

The centre is aimed to impart automation skill to students to develop skills which are required for many manufacturing and processing industries. Main focus of the centre is on skill development on industrial automation through pneumatics, hydraulics, electro pneumatics, electro hydraulics, programmable logic controllers, Fluid Sim (software) and codesys - IEC 61131-3 programming tools. Students have the opportunity to do their internship on industrial automation in republican institute for vocational education, Minsk, Belarus. after successfully completing the courses offered from the centre on industrial automation. The internship is about industry revolution 4.0 which is the current trend of automation and data exchange in manufacturing technologies.

CU-MBRDI DAIMLER TRUCK TEAR DOWN FACILITY

This facility is for the tear down of Daimler trucks starting with a Light Duty Truck (LDT) followed by Medium Duty and Heavy duty Trucks. The training involves dismantling truck parts in sequence starting from cabin & steering system, engine periphery, transmission system, electrical system, suspension and braking system. Each dismantled part of truck will be studied with respect to its design, manufacture, assembly for further improvements and innovations. The training contributes to provide hands-on experience, benchmarking and knowledge sharing in various verticals of vehicle construction and engineering to provide industry ready engineers.

Ecosence Renewable Energy Laboratory

The facilities caters to the needs of both academic and research. Research scholars can design and test new renewable energy systems in its domains of Solar and Wind energy. The facilities include Solar PV Grid Tied Training System, Solar PV Emulator, Wind Energy Training System, Wind Emulator, Solar Thermal Training System and Solar Concentrator Training System

Research Laboratory

Advanced Material

Advanced material testing research laboratory consisting of facilities for cross sectional metallographic specimen preparation, microstructure analysis, material property testing, testing fatigue, hardness and impact, surface engineering laboratory for thermal shock and thermal barrier testing ceramic coated metal specimen and coating facility with Spray Drier.

Research Laboratory

Alternate Fuels

The 50-litre capacity biodiesel plant is equipped with advanced technology helps to carry out mass production of biodiesel efficiently. A customised multi-fuel engine
modified from Kirloskar oil engine, which has the option of varying compression ratio from 6:1 to 10:1 for petrol (rated power 3HP) and 12:1 to 20:1 for diesel (rated power 5HP) helps to test alternative fuels of gasoline and diesel with eddy current dynamometer.

Centre

E-mobility

The facility is developed with the vision to provide the avenues with regards to improved charging infrastructure, smart electric drive systems, IoT technologies for EVs and improved power system dynamics. R & D Facility is a joint venture of Safran Engineering Services, IEEE and CHRIST (Deemed to be University).

Research Laboratory

Surface Engineering

A Research laboratory, funded by VSSC, ISRO, Thiruvanathapuram, involves the development of ceramic coating configurations to reduce the surface temperature of the aerospace component (re-entry vehicle) to serve at elevated temperatures without undergoing thermal fatigue and failure.

Name	Specialization	Campus
Dr AMRUTA ROUT	Robotics	BANGALORE CAMPUS	View
ANIL MELWYN REGO	Six Sigma	BANGALORE CAMPUS	View
Dr ANIL RAJ	Manufacturing	BANGALORE CAMPUS	View
DARSHAN S M	Machine Design	BANGALORE CAMPUS	View
Dr FRANCIS XAVIER L	Tribology	BANGALORE CAMPUS	View
GOWTHAM SANJAI S	Engineering Design	BANGALORE CAMPUS	View
Dr GURUMOORTHY S HEBBAR	Mechanical Engineering	BANGALORE CAMPUS	View
HADIYA PRITESH DULABHAI	Mechanical Engineering	BANGALORE CAMPUS	View
HARISH KUMAR M	Computer Aided Engineering	BANGALORE CAMPUS	View
Dr IVAN SUNIT ROUT	Hard Machining Technology	BANGALORE CAMPUS	View
Dr JAMES SATHYA KUMAR	Mechanical Engineering	BANGALORE CAMPUS	View
Dr JANGAM SASIDHAR	Mechanical Engineering	BANGALORE CAMPUS	View
KIRAN K	Mechanical Engineering	BANGALORE CAMPUS	View
NIRANJANA S J	Machine Design	BANGALORE CAMPUS	View
Dr PALPANDIAN P	Mechanical Engineering	BANGALORE CAMPUS	View
Dr PARTHASARATHY N S	Vibrations	BANGALORE CAMPUS	View
Dr PARVATI RAMASWAMY	Materials Science/Ceramics	BANGALORE CAMPUS	View
Dr PRADEEP KUMAR G S	Composite Materials	BANGALORE CAMPUS	View
PUNIT KONGI	Automobile Engineering	BANGALORE CAMPUS	View
Dr RAMESHA K	Mechanical Engineering Sciences	BANGALORE CAMPUS	View
Dr RAVICHANDRAN G	Mechanical Engineering Sciences	BANGALORE CAMPUS	View
RAVIKUMAR R	Alternative Fuel & IC Enginge	BANGALORE CAMPUS	View
Dr REGHU V R	Mechanical Engineering	BANGALORE CAMPUS	View
Dr SAJNA PARIMITA PANIGRAHI	Computational Fluid Dynamics	BANGALORE CAMPUS	View
Dr SHARAD CHANDRA SHARMA	Materials Science	BANGALORE CAMPUS	View
Dr SHIJO THOMAS	Mechanical Engg: - Nano metal matrix Composites	BANGALORE CAMPUS	View
Dr SHIVAKUMAR S	Mechanical Engineering Sciences	BANGALORE CAMPUS	View
Dr THEJARAJU R	Mechanical Engineering Sciences	BANGALORE CAMPUS	View
UMESH V	Robotic and Automation	BANGALORE CAMPUS	View

Name	Specialization	Campus
Record not updated.

Name	Specialization	Campus
Record not updated.

Name	Specialization	Campus
PRATAP KUMAR J	MECHANICAL(ADVANCED MATERIAL TECHNOLOGY)	BANGALORE KENGERI CAMPUS	View

Name	Specialization	Campus
Record not updated.

Name	Programme
AVINASH BABU	PhD-Mechanical Engineering (June Batch)
DEEPU SAJEEV	PhD-Mechanical Engineering
GEETHA H R	PhD-Mechanical Engineering (June Batch)
GOWTHAM SANJAI S	PhD-Mechanical Engineering
HADIYA PRITESH DULABHAI	PhD-Mechanical Engineering
JAGADEESH L R	PhD-Mechanical Engineering
KIRAN K	PhD-Mechanical Engineering
KRISHNANUNNI M	PhD-Mechanical Engineering (June Batch)
NAGARAJA T K	PhD-Mechanical Engineering
NICE MENACHERY	PhD-Mechanical Engineering
PRAISE TOM	PhD-Mechanical Engineering
PRATAP KUMAR J	PhD-Mechanical Engineering
RALDO PAUL K	PhD-Mechanical Engineering (June Batch)
SUNEETH SUKUMARAN	PhD-Mechanical Engineering
T PRAMOD REDDY	PhD-Mechanical Engineering
VIVEK K S	PhD-Mechanical Engineering

Photos

Department of

Mechanical and Automobile Engineering

Vision

Mission

Department

Overview

Message

from the HoD

PROGRAMMES

Department

Activities

Activities

Research

Newsletter

Placements

State

of the Art

Advanced Machining Laboratory

BOSCH AUTOMOTIVE WORKSHOP

Energy Conversion Laboratory

FESTO AUTOMATION TRAINING CENTRE

CU-MBRDI DAIMLER TRUCK TEAR DOWN FACILITY

Ecosence Renewable Energy Laboratory

Research Laboratory

Research Laboratory

Centre

Research Laboratory

Faculty

List

Department

Photos

CHRIST

(Deemed to be University)

Vision

Mission