Faculty

Profile

 Back

Dr ANIL RAJ

BTech, ME, PhD
ASSISTANT PROFESSOR


MECHANICAL AND AUTOMOBILE ENGINEERING
SCHOOL OF ENGINEERING AND TECHNOLOGY
KENGERI CAMPUS

Name Programme Institution Year of Passing
PhD PhD Karunya Institute of Technology and Sciences 2018
PG ME Karunya University 2007
Degree BTech Pondicherry Unicversity 2005
Sl.No. Title Name of Periodical Periodicity Date
Sl.No. Title Name of Journal Date of Publication Volume No/Issue No/Page No
1 PARAMETRIC ANALYSIS OF RESPONSE VARIABLES FOR IMPROVING THE MACHINING CHARACTERISTICS OF INCONEL 718 USING CERAMIC INSERTS International Journal of Mechanical and Production Engineering Research and Development 03-Dec-2019 9 / Special Issue /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) PALPANDIAN P,ANIL RAJIVAN SUNIT ROUT
Title of Article PARAMETRIC ANALYSIS OF RESPONSE VARIABLES FOR IMPROVING THE MACHINING CHARACTERISTICS OF INCONEL 718 USING CERAMIC INSERTS
Name of Journal International Journal of Mechanical and Production Engineering Research and Development
Volume No 9
Issue No Special Issue
Page No
URL http://www.tjprc.org/conference-archives.php?year=&cid=&tid=&jname=67_2&e_type=Special%20Issue&page=31
Date of Publication 03-Dec-2019
2 Optimization of Cutting Parameters in Hard Turning of OHNS Steel International Journal of Recent Technology and Engineering (IJRTE) 17-Jul-2019 8 / 2S3 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) ANIL RAJ,K. LEO DEV WINS,M. DEVNANDANIL RAJ
Title of Article Optimization of Cutting Parameters in Hard Turning of OHNS Steel
Name of Journal International Journal of Recent Technology and Engineering (IJRTE)
Volume No 8
Issue No 2S3
Page No
URL
Date of Publication 17-Jul-2019
3 Optimization of Fluid Application Parameters during Hard Turning of AISI H13 Tool Steel using Minimal Cutting Fluid Application International Journal of Research in Mechanical Engineering 01-Jun-2016 4 / 3 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) ANIL RAJ,K. LEO DEV WINS,A. S. VARADARAJANANIL RAJ
Title of Article Optimization of Fluid Application Parameters during Hard Turning of AISI H13 Tool Steel using Minimal Cutting Fluid Application
Name of Journal International Journal of Research in Mechanical Engineering
Volume No 4
Issue No 3
Page No
URL http://www.academia.edu/26930188/Optimization_of_Fluid_Application_Parameters_during_Hard_Turning_of_AISI_H13_Tool_Steel_using_Minimal_Cutting_Fluid_Application
Date of Publication 01-Jun-2016
4 Cutting Parameters Optimization during Hard Turning of AISI H13 Tool Steel International Journal of Research in Mechanical Engineering 01-Jun-2016 4 / 3 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) ANIL RAJ,K. LEO DEV WINS,A. S. VARADARAJANANIL RAJ
Title of Article Cutting Parameters Optimization during Hard Turning of AISI H13 Tool Steel
Name of Journal International Journal of Research in Mechanical Engineering
Volume No 4
Issue No 3
Page No
URL http://www.academia.edu/26930050/Cutting_Parameters_Optimization_during_Hard_Turning_of_AISI_H13_Tool_Steel
Date of Publication 01-Jun-2016
5 Performance Evaluation of Vegetable Oil based Cutting Fluid during Hard Turning of AISI 4340 Steel with Minimal Cutting Fluid Application. Indian Journal of science & technology 14-Apr-2016 9 / 13 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) ANIL RAJ,LEO DEV WINS K.,DEV ANAND M.,VARADARAJAN A. S.ANIL RAJ
Title of Article Performance Evaluation of Vegetable Oil based Cutting Fluid during Hard Turning of AISI 4340 Steel with Minimal Cutting Fluid Application.
Name of Journal Indian Journal of science & technology
Volume No 9
Issue No 13
Page No
URL http://www.indjst.org/index.php/indjst/article/view/90583
Date of Publication 14-Apr-2016
6 ANFIS based Model for Surface Roughness Prediction for Hard Turning with Minimal Cutting Fluid Application Indian Journal of Science and Technology 14-Apr-2016 9 / 13 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) ANIL RAJ,M. DEVANAND,K. LEO DEV WINS,A. S. VARADAARAJANANIL RAJ
Title of Article ANFIS based Model for Surface Roughness Prediction for Hard Turning with Minimal Cutting Fluid Application
Name of Journal Indian Journal of Science and Technology
Volume No 9
Issue No 13
Page No
URL http://www.indjst.org/index.php/indjst/issue/view/6715
Date of Publication 14-Apr-2016
7 Review on Hard Machining with Minimal Cutting Fluid Application International Journal of Current Engineering and Technology 03-Dec-2015 5 / 6 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) ANIL RAJ,K. LEO DEV WINS,A. S. VARADARAJANANIL RAJ
Title of Article Review on Hard Machining with Minimal Cutting Fluid Application
Name of Journal International Journal of Current Engineering and Technology
Volume No 5
Issue No 6
Page No
URL http://inpressco.com/review-on-hard-machining-with-minimal-cutting-fluid-application/
Date of Publication 03-Dec-2015
8 Optimization of Cutting Parameters and Fluid Application Parameters during Turning of OHNS Steel Procedia Engineering 02-Dec-2014 97 / 2014 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) ANIL RAJ,K LEO DEV WINS,R. DEEPAK JOEL JOHNSON,B. ANUJA BEATRICEANIL RAJ
Title of Article Optimization of Cutting Parameters and Fluid Application Parameters during Turning of OHNS Steel
Name of Journal Procedia Engineering
Volume No 97
Issue No 2014
Page No
URL http://www.sciencedirect.com/science/article/pii/S1877705814032986
Date of Publication 02-Dec-2014
9 Artificial Neural Network assisted sensor fusion model for predicting surface roughness during hard turning of H13 steel with minimal cutting fluid application. Procedia Material Science (Elsevier) 02-May-2014 5 / 1 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) ANIL RAJ,K. LEO DEV WINS,J. GERALD ANTO ARULRAJANIL RAJ
Title of Article Artificial Neural Network assisted sensor fusion model for predicting surface roughness during hard turning of H13 steel with minimal cutting fluid application.
Name of Journal Procedia Material Science (Elsevier)
Volume No 5
Issue No 1
Page No
URL http://www.sciencedirect.com/science/article/pii/S2211812814008426
Date of Publication 02-May-2014
Sl.No. Title URL Subject Month Year
Sl.No. Type of Book Title Title of Book/Chapter/Article/Case Study) ISBN Month Year
1 Conference Proceedings IOP Conf. Series: Materials Science and Engineering Optimization of cutting parameters and prediction of surface roughness during hard turning of H13 steel with minimal vegetable oil based cutting fluid application using response surface methodology Dec 2019

Additional information

Type of Book Conference Proceedings
Type of Work Chapter
Sole Authored/Co Authored Co-Authored
Author Name (s) ANIL RAJ,K. LEO DEV WINS,A. S. VARDARAJAN,IOP CONFERENCE SERIES,ANIL RAJ
Title of Book IOP Conf. Series: Materials Science and Engineering
Title of Book/Chapter/Article/Case Study) Optimization of cutting parameters and prediction of surface roughness during hard turning of H13 steel with minimal vegetable oil based cutting fluid application using response surface methodology
Month/Year Dec/2019
ISBN
Pages
Publishing Company/Institution IOP Conference Series: Materials Science and Engin
Level International publisher
2 Text book Emerging Trends in Mechanical Engineering Comparison of Various Types of Lubrication During Hard Turning of H13 Tool Steel by Analysing Flank Wear Using ANOVA 978-981-32-9931-3 Dec 2019

Additional information

Type of Book Text book
Type of Work Chapter
Sole Authored/Co Authored Co-Authored
Author Name (s) ANIL RAJ,RAMESHA K
Title of Book Emerging Trends in Mechanical Engineering
Title of Book/Chapter/Article/Case Study) Comparison of Various Types of Lubrication During Hard Turning of H13 Tool Steel by Analysing Flank Wear Using ANOVA
Month/Year Dec/2019
ISBN 978-981-32-9931-3
Pages 489 - 497
Publishing Company/Institution Springer, Singapore
Level International publisher
Sl.No. Title Abstract Objectives Type Sponsors
Sl.No. Title Place of Publication ISBN No. Month Year
Sl.No. Type of Program Role Name of Program Title of Paper Date Organising Institution Level
1 Seminar Participant Trends and Developments in Robotics 23/10/2020 Christ University International
2 Seminar Participant Employee Engagement in the Virtual World 25/07/2020 Christ University International
3 Seminar Participant Webinar on Innovations for Atmanirbaratha for Electric Vehicles 24/07/2020 Christ University International
4 Seminar Participant Webinar on V2X Communication 10/07/2020 Christ University International
5 Seminar Participant Investigation of the effect of cracks on vibration parameters of a cantilever beam 07/07/2020 Francis Xavier college of engineering National
6 Seminar Participant Ultrafine grained materials: Old material with futuristic properties 04/07/2020 Francis xavier college of engineering International
7 Seminar Participant X-ray Diffraction and its Applications 03/07/2020 REVA University, Bengaluru National
8 Seminar Participant Webinar on Skill development in Industry 4.0 03/07/2020 Indira ganeshan college of engineering National
9 Seminar Participant Global Tech Talk 26/06/2020 Christ University National
10 Conference Presenter International conference on advancements in mechanical engineering (ICAME 2019) Optimization of friction stir welding parameters using taguchi method 10/04/2019 Jyothi engineering college International
11 Symposium Presenter A National level students technical symposium Parametric analysis using response surface methodology in joining of Al3103 and Al7075 by friction stir welding 23/03/2019 Siddaganga institute of technology National
12 Conference Presenter International conference on emerging trends in mechanical engineering 2018, ICETME-2018 Comparison of various types of lubrication during hard turning of H13 tool steel by analysing flank wear using ANOVA analysis. 20/12/2018 Srinivasa ramanujan institute of technology, ananthapuramu International
13 Conference Moderator/Chair International conference on Advanced ceramic and nanomaterials for sustainable development 19/09/2018 Christ University International
14 Conference Presenter International conference on Advances in material and manufacturing Optimization of cutting parameters and prediction of surface roughness during hard turning of H13 steel with minimal vegetable oil based cutting fluid application using response surface methodology 16/08/2018 Amrita vishwa vidhyapeetham, Bangalore International
15 Conference Moderator/Chair International conference on Advances in materials and manufacturing applications 16/08/2018 AMRITA VISWA VIDHYAPEETHAM, BANGALORE International
16 Conference Presenter International conference on Innovative Approaches in Mechanical Engineering and Management studies, IAMM 2016. Cutting parameters optimization during hard turning of AISI H13 tool steel. 02/06/2016 Trinity College of Engineering, Trivandrum. International
17 Conference Presenter International conference on Innovative approaches in mechanical engineering and Management studies (IAMM 2016) Optimization of fluid application parameters during hard turning of AISI H13 tool steel using minimal cutting fluid application 02/06/2016 Trinity college of engineering, Trivandrum International
18 Conference Presenter International conference on civil, mechanical and environmental engineering technologies 2016 Comparison of surface roughness and chip characteristics obtained under different modes of lubrication during hard turning of AISI H13 tool work steel 26/02/2016 SVS college of engineering college, coimbatore-642109 International
19 Conference Presenter International conference on civil, mechanical and environmental engineering technologies 2016 Evaluation of the performance during hard turning of OHNS steel with minimal cutting fluid application and its comparison with minimum quantity lubrication 26/02/2016 SVS college of engineering college, coimbatore-642109 International
20 Conference Participant National level techno-management paper presentation (young minds 2015) 28/08/2015 Prompt Infotech, Coimbatore, Tamilnadu National
21 Conference Presenter National conference on Innovative approaches in manufacturing and design (IAMD 15) Optimization of fluid application parameters during hard turning of OHNS steel with minimal cutting fluid application 25/07/2015 Christ University National
22 Conference Presenter International conference on Mechanical and Manufacturing engineering Experimental investigation of soyabean oil based cutting fluid during turning of Hardened AISI 4340 steel with minimal fluid application 02/04/2015 Sri chandrasekharendra saraswathi viswa mahavidhyaalaya, kanchipuram 631561 International
23 Symposium Presenter International conference on Modelling, optimization and computing, ICMOC 2014 Performance Evaluation on Minimal cutting fluid application 10/04/2014 Noorul Islam center for higher education International
24 Conference Presenter International conference on advances in manufacturing and materials engineering, ICAMME-2014. artificial Neural Network assisted sensor fusion model for predicting surface roughness during hard turning of H13 steel with minimal cutting fluid application. 27/03/2014 National Institute of Technology Karnataka. International
25 Conference Presenter National conference in recent trends in mechanical Engineering (NCLTME 2014) Optimization of cutting parameters in hard turning of OHNS steel 25/03/2014 NSS college of Engineering Palagat National
26 Conference Presenter National conference in recent trends in mechanical Engineering (NCLTME 2014) Optimization of cutting parameters during hard turning of H13 tool steel 25/03/2014 NSS college of Engineering Palagat National
27 Seminar Participant Two day seminar on Embedded systens 30/11/2010 Sarabhai Institute of Science and Technology Regional
Sl.No. Title of the Program Name of the Program Date Name of the Institution
1 Latest trends in Manufacturing & research LATEST APPROACHES IN RESEARCH 08/02/2019 Kinesys Tech Solutions & Department Of Mechanical Engineering Trinity College Of Engineering
Sl.No. Title Genre Producer Copyrights
Sl.No. Title Guide Name Institution Month Year
1 Investigations on hard turning of H13 and OHNS steels with minimal cutting fluid application Dr. Leo Dev Wins
Sl.No. Title Name of Student Institution Month Year
Sl.No. Title of Invention Inventor(s) Filing Date
Sl.No. Name of the Research Project Investigator(s) Sponsors Internal/External
Sl.No. Name of the Conference/Seminar Name of Organiser Level Date
Sl.No. Name of the Workshop/FDP/Training programme Name of Oraganiser Level Date
1 COVID-19: What You Need to Know (CME Eligible) Coursera, Osmosis International 15/12/2020
2 Fundamentals of Project Planning and Management Coursera, University of Virginia International 15/10/2020
3 Machine Learning for All Coursera, University of London International 12/10/2020
4 Collaborative Robot Safety: Design & Deployment Coursera, University at Buffalo and The State University of New York International 01/09/2020
5 Materials Science: 10 Things Every Engineer Should Know Coursera, University of California, Davis International 27/08/2020
6 Digital Transformation Coursera, BCG and University of Virginia International 24/08/2020
7 AI For Everyone Coursera, deeplearning.ai International 19/08/2020
8 Powerful Tools for Teaching and Learning: Digital Storytelling Coursera, University of Houston International 04/08/2020
9 Material Processing Coursera, Georgia Institute of Technology International 01/07/2020
10 Nanotechnology and Nanosensors, Part1 Coursera, Technion - Israel Institute of Technology International 28/06/2020
11 Business implications of AI: A nano course Coursera International 08/06/2020
12 Supply chain principles Coursera Georgia Tech International 01/06/2020
13 Ferrous Technology II Coursera, Pohang University of Science and Technology International 01/06/2020
14 Material Processing Coursera International 28/05/2020
15 Model based systems engineering Coursera International 26/05/2020
16 Foundations of Teaching for Learning: Introduction Coursera, Commonwealth Education Trust International 25/05/2020
17 Road map to success in Digital manufacturing and design Coursera International 19/05/2020
18 Cyber security in Manufacturing Coursera International 12/05/2020
19 Digital Thread components Coursera International 12/05/2020
20 Digital Manufacturing and design Coursera International 11/05/2020
21 Intelligent Machining Coursera, University at Buffalo and The State University of New York International 05/05/2020
22 Advanced manufacturing enterprise Coursera International 05/05/2020
23 Digital thread implementation Coursera International 04/05/2020
24 Advanced manufacturing process analysis Coursera International 03/05/2020
25 Learning to teach online Coursera International 16/04/2020
26 Two days workshop on research and modern tool usage Department of mechanical and automobile engineering, CUFE Institutional 30/05/2019
27 Latest trends in Research KINESYS and Department of Mechanical engineering, Trinity college of engineering, trivandrum Institutional 08/02/2019
28 Faculty improvement Programme (intellectual property rights) Christ Faculty of Engineering 06/08/2018
29 Two day workshop on Measurements during Metal Cutting AICTE National 11/10/2013
30 Teachers' Training Programme Sarabhai Institute of Science & Technology Regional 25/05/2009
31 Induction Training Program for Engineering college Teachers- ITPECT'08 TEQUIP, GOVT of INDIA and Centre for Continuing education 09/06/2008
Sl.No. Name of the Awards/Achievements/Others Description Organisation Month/ Year
1 Life fellow in Indian Institute of Production engineers Elected as Life fellow in INDIAN INSTITUTE OF PRODUCTION ENGINEERS INDIAN INSTITUTE OF PRODUCTION ENGINEERS 13 March 2017
2 Ph.D in Mechanical Engineering Ph.D in Mechanical Engineering Karunya Institut of Technology & sciences, (Deemed to be University) 30 June 2018
3 FELLOW INDIAN SOCIETY OF MECHANICAL ENGINEERS (ISME) Indian society of Mechanical engineers 14 February 2019

CHRIST

(Deemed to be University)

Hosur Road, Bengaluru - 560029,
Karnataka, India

Tel: +91 804012 9100 / 9600

Fax: 40129000

Email: mail@christuniversity.in

Web: http://www. christuniversity.in

Vision

EXCELLENCE AND SERVICE

Mission

CHRIST (Deemed to be University) is a nurturing ground for an individual's holistic development to make effective contribution to the society in a dynamic environment.

Copyright © CHRIST (Deemed to be University) 2020
Website Developed by Cloud Business Pages from INI Technologies Pvt Ltd., Kochi, India