Faculty

Profile

Dr SHIJO THOMAS

BE, ME, MBA, PhD
ASSISTANT PROFESSOR

SCHOOL OF ENGINEERING AND TECHNOLOGY
BANGALORE CAMPUS
 Print Profile

Sl.No. Title Name of Periodical Periodicity Date
Sl.No. Title Name of Journal Date of Publication Volume No/Issue No/Page No
1 Prediction of Friction Stir Welding Parameters Using Response Surface Methodology AIP Conference Proceedings 22-Sep-2023 / / 040027-1-040027-7

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,ANIL RAJ,IVAN SUNIT ROUT,HADIYA PRITESH DULABHAI
Title of Article Prediction of Friction Stir Welding Parameters Using Response Surface Methodology
Name of Journal AIP Conference Proceedings
Volume No
Issue No
Page No 040027-1-040027-7
URL https://pubs.aip.org/aip/acp
Indexing Agency Scopus
Date of Publication 22-Sep-2023
2 Influence of nano hexagonal boron nitride on the wear properties of aluminium alloy Advances in Materials and Processing Technologies 26-May-2023 May / / -

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,LIJO P THOMAS,SANTHOSH N,PRADEEP KUMAR G S ,GURUMOORTHY S HEBBAR
Title of Article Influence of nano hexagonal boron nitride on the wear properties of aluminium alloy
Name of Journal Advances in Materials and Processing Technologies
Volume No May
Issue No
Page No -
URL https://www.tandfonline.com/loi/tmpt20
Indexing Agency Scopus
Date of Publication 26-May-2023
3 Processing of nanoreinforced aluminium hybrid metal matrix composites and the effect of post-heat treatment: a review Applied Nanoscience 05-Dec-2022 / / -

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,B. DEEPANRAJ,N. SENTHILKUMAR
Title of Article Processing of nanoreinforced aluminium hybrid metal matrix composites and the effect of post-heat treatment: a review
Name of Journal Applied Nanoscience
Volume No
Issue No
Page No -
URL https://www.springer.com/journal/13204
Indexing Agency Scopus
Date of Publication 05-Dec-2022
4 Removal of arsenic using ecofriendly egg shell and black toner powder Materials Today: Proceedings 06-Jul-2022 65 / 9 / 3946-3950

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,FRANCIS XAVIER L,MOTHI KRISHNA MOHAN,VINAY JOSEN
Title of Article Removal of arsenic using ecofriendly egg shell and black toner powder
Name of Journal Materials Today: Proceedings
Volume No 65
Issue No 9
Page No 3946-3950
URL https://www.sciencedirect.com/journal/materials-today-proceedings
Indexing Agency Scopus
Date of Publication 06-Jul-2022
5 Studies on Tensile Properties of Graphene Hydroxyl Reinforced Aluminium 6061 Composites for Vehicle Structures Applications International Journal of Vehicle Structures and Systems 08-Mar-2022 14 / 2 / 1-5

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) RAMESHA K,M.R. SRINIVASA,Y.S. RAMMOHAN,M. SADASHIVA,M.K. YATHISH,SHIJO THOMAS
Title of Article Studies on Tensile Properties of Graphene Hydroxyl Reinforced Aluminium 6061 Composites for Vehicle Structures Applications
Name of Journal International Journal of Vehicle Structures and Systems
Volume No 14
Issue No 2
Page No 1-5
URL https://maftree.org/eja/index.php/ijvss/article/view/1961
Indexing Agency Scopus
Date of Publication 08-Mar-2022
6 Effect of a novel sintering technique: hot coining on microstructure and mechanical properties of MWCNT reinforced Al metal matrix nanocomposite Advances in Materials and Processing Technologies 31-Aug-2021 Aug / / 1-18

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Sole
Author Name (s) SHIJO THOMAS (2443)
Title of Article Effect of a novel sintering technique: hot coining on microstructure and mechanical properties of MWCNT reinforced Al metal matrix nanocomposite
Name of Journal Advances in Materials and Processing Technologies
Volume No Aug
Issue No
Page No 1-18
URL https://www.tandfonline.com/loi/tmpt20
Indexing Agency Scopus
Date of Publication 31-Aug-2021
7 Studies on Parametric Optimization of HVOF-Sprayed Cr2O3 Coatings on Al6061 Alloy Transactions of the Indian Institute of Metals 03-Jun-2021 / / -

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) HARISH KUMAR M,PRADEEP KUMAR G S ,SHIJO THOMAS,H M YEGNESH,SHARADA BHARADWAJ,GURUMOORTHY S HEBBAR
Title of Article Studies on Parametric Optimization of HVOF-Sprayed Cr2O3 Coatings on Al6061 Alloy
Name of Journal Transactions of the Indian Institute of Metals
Volume No
Issue No
Page No -
URL https://link.springer.com/article/10.1007%2Fs12666-021-02295-6
Indexing Agency Web of Science and Scopus
Date of Publication 03-Jun-2021
8 An improved compocasting technique for uniformly dispersed multi-walled carbon nanotube in AA2219 Alloy Melt FME Transactions 13-Jun-2020 / / 581-587

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,KESHAVAMURTHY R,PRADEEP KUMAR G S ,VIJAY TAMBRALLIMATH,PRASANNA G D
Title of Article An improved compocasting technique for uniformly dispersed multi-walled carbon nanotube in AA2219 Alloy Melt
Name of Journal FME Transactions
Volume No
Issue No
Page No 581-587
URL https://www.mas.bg.ac.rs/istrazivanje/fme/start
Indexing Agency Scopus
Date of Publication 13-Jun-2020
9 Effect of MWCNT concentration on microstructures, mechanical properties and sintering behaviour of spark plasma sintered AA2219-MWCNT composites Materials Today: Proceedings 20-May-2020 22 (2020) / / 1424-1432

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,UMASANKAR V
Title of Article Effect of MWCNT concentration on microstructures, mechanical properties and sintering behaviour of spark plasma sintered AA2219-MWCNT composites
Name of Journal Materials Today: Proceedings
Volume No 22 (2020)
Issue No
Page No 1424-1432
URL https://www.sciencedirect.com/science/article/pii/S2214785320305915
Indexing Agency Scopus
Date of Publication 20-May-2020
10 Effect of sonication in enhancing the uniformity of MWCNT distribution in aluminium alloy AA2219 matrix Materials Today: Proceedings 27-Nov-2019 18 (2019) / / 4058-4066

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,UMASANKAR V,LAVA KUMAR PILLARI,JOE PIOUS
Title of Article Effect of sonication in enhancing the uniformity of MWCNT distribution in aluminium alloy AA2219 matrix
Name of Journal Materials Today: Proceedings
Volume No 18 (2019)
Issue No
Page No 4058-4066
URL https://www.sciencedirect.com/science/article/pii/S2214785319325283
Indexing Agency Scopus
Date of Publication 27-Nov-2019
11 Self lubricating property of MWCNT in AA2219 composites during high energy ball milling Materials Today: Proceedings 27-Nov-2019 18 (2019) / / 3387-3393

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,UMASANKAR V,CECIL JOSEPH,JOSEPH MATHEW
Title of Article Self lubricating property of MWCNT in AA2219 composites during high energy ball milling
Name of Journal Materials Today: Proceedings
Volume No 18 (2019)
Issue No
Page No 3387-3393
URL https://www.sciencedirect.com/science/article/pii/S2214785319324447
Indexing Agency Scopus
Date of Publication 27-Nov-2019
12 Review of Recent Progress in the Development and Properties of Aluminum Metal Matrix Composites Reinforced with Multiwalled Carbon Nanotube by Powder Metallurgy Route Materials Performance and Characterization 14-May-2019 8 / 3 / 371-400

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,UMASANKAR V
Title of Article Review of Recent Progress in the Development and Properties of Aluminum Metal Matrix Composites Reinforced with Multiwalled Carbon Nanotube by Powder Metallurgy Route
Name of Journal Materials Performance and Characterization
Volume No 8
Issue No 3
Page No 371-400
URL https://www.astm.org/DIGITAL_LIBRARY/JOURNALS/MPC/PAGES/MPC20180140.htm
Indexing Agency Web of Science and Scopus
Date of Publication 14-May-2019
13 Influence of Manufacturing Process on Distribution of MWCNT in Aluminium Alloy Matrix and Its Effect on Microhardness Materials Science Forum 01-Aug-2018 928 / / 32-37

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,UMASANKAR V
Title of Article Influence of Manufacturing Process on Distribution of MWCNT in Aluminium Alloy Matrix and Its Effect on Microhardness
Name of Journal Materials Science Forum
Volume No 928
Issue No
Page No 32-37
URL https://www.scientific.net/MSF/Details
Indexing Agency Scopus
Date of Publication 01-Aug-2018
14 Effect of MWCNT reinforcement on the precipitation-hardening behavior of AA2219 International Journal of Minerals, Metallurgy, and Materials 03-Jan-2018 25 / 1 / 53-61

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,V. UMASANKAR
Title of Article Effect of MWCNT reinforcement on the precipitation-hardening behavior of AA2219
Name of Journal International Journal of Minerals, Metallurgy, and Materials
Volume No 25
Issue No 1
Page No 53-61
URL https://link.springer.com/article/10.1007/s12613-018-1546-2
Indexing Agency Scopus
Date of Publication 03-Jan-2018
15 Effect on Hardness and densification of MWCNT reinforced AA2219 composites sintered in different methods ARPN Journal of Engineering and Applied Sciences 24-Mar-2017 12 / 6 / 1701-1705

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,V. UMASANKAR
Title of Article Effect on Hardness and densification of MWCNT reinforced AA2219 composites sintered in different methods
Name of Journal ARPN Journal of Engineering and Applied Sciences
Volume No 12
Issue No 6
Page No 1701-1705
URL http://www.arpnjournals.org/jeas/research_papers/rp_2017/jeas_0317_5812.pdf
Indexing Agency Scopus
Date of Publication 24-Mar-2017
Sl.No. Title URL Subject Month Year
Sl.No. Type of Book Title Title of Book ISBN Month Year
Sl.No. Type of Book Title of Chapter/Article ISBN Month Year
1 Conference Proceedings Mechanical and Wear Behavior of Halloysite Nanotubes Filled Silk/Basalt Hybrid Composites Using Response Surface Methodology 978-981-99-5566-4 Jun 2023

Additional information

Type of Book Conference Proceedings
Type of Work Chapter
Sole Authored/Co Authored Co-Authored
Author Name (s) DARSHAN S M,SHIJO THOMAS,SANJAY MAVINKERE RANGAPPA
Title of Book Lightweight and Sustainable Polymeric Material
Title of Book/Chapter/Article/Case Study) Mechanical and Wear Behavior of Halloysite Nanotubes Filled Silk/Basalt Hybrid Composites Using Response Surface Methodology
Month/Year Jun/2023
ISBN 978-981-99-5566-4
Pages 387 - 402
Publishing Company/Institution Springer Nature
Indexing Agency Scopus
Level International publisher
Sl.No. Type of Book Title Title of Case Study ISBN Month Year
Sl.No. Title Abstract Objectives Type Sponsors
Sl.No. Title Place of Publication ISBN No. Month Year
Sl.No. Type of Program Role Name of Program Title of Paper Date Organising Institution Level
1 Seminar Participant National Seminar on "Strategies for Energy Efficiency, Sustainable Practices and Climate Resilience" Sponsored by AICTE-VAANI in collaboration with Bamboo Society of India 07/08/2024 Christ University National
2 Symposium Participant Novel and Emerging Approaches in Additive Manufacturing Ecosystem and Exploring the opportunities for External Funding 26/07/2024 Christ University National
3 Conference Presenter International Conference on Recent Trends In Material Science The behavior of Hexagonal Boron Nitride nanoparticles in Aluminium Metal Matrix Composite synthesized by high energy ball milling and conventional sintering. 06/03/2024 DST-SERB and Kristu Jayanti College International
4 Conference Presenter 6th International conference on advancements in materials and manufacturing Development and characterization of carbon fiber reinforcement in Aluminium metal matrix composites 16/02/2024 MLR Institute of Technology International
5 Conference Presenter SERB Sponsored International Conference on Recent Advancements in Materials Science and Technology, Experimental investigation of nano hexagonal boron nitride reinforcement in Aluminium alloys through casting method 29/01/2024 Karpagam Academy of Higher Education (Deemed to be University) International
6 Conference Presenter 4th International Conference on Emerging Research in Civil, Aeronautical and Mechanical Engineering Fabrication of High-Performance Mg Matrix Hybrid Composite Using New Compocasting Method and Investigate the Effect of Nanoparticle and Fibre Reinforcement 22/09/2023 Nitte Meenakshi Institute of Technology, Bangalore International
7 Conference Presenter Fourth international conference on Emerging Research in Civil, Aeronautical and Mechanical Engineering Comparative Analysis of the Impact of the Powder Metallurgy and Compocasting Processing Routes for Fabricating Aluminium Alloy Reinforced with Nanoparticles 22/09/2023 Nitte Meenakshi Institute of Technology, Bengaluru International
8 Conference Presenter Fourth international conference on Emerging Research in Civil, Aeronautical and Mechanical Engineering High-performance Mg hybrid composites using upgraded Squeeze Casting and study the significance of Al2O3 and carbon fiber in Mg matrix. 22/09/2023 Nitte Meenakshi Institute of Technology, Bengaluru International
9 Conference Presenter 5 th International Conference on "Recent Innovations in Science & Technology (RIST 2023) Effects Of Nanoparticleand Fiber Reinforcement On High-Performance Magnesium Matrix Composite Using Novel Compocasting Method 07/04/2023 Holy Grace Academy Of Engineering Mala, Thrissur, Kerala, India International
10 Conference Presenter 5 th International Conference on "Recent Innovations in Science & Technology (RIST 2023) Comparative Study On The Effect Of Fabrication Methods Of Aluminium Alloy Reinforced With Nano-Particles By Powder Metallurgy And Compo-Casting 07/04/2023 Holy Grace Academy Of Engineering Mala, Thrissur, Kerala, India International
11 Symposium Presenter International Symposium on Lightweight and Sustainable Polymeric Materials - LSPM?23 , Bangkok, Thailand Mechanical and wear behaviour of halloysite nanotubes filled silk/basalt hybrid composites using response surface methodology 17/02/2023 KMUNTNB International
12 Conference Presenter International conference on computing in mechanical engineering Prediction of Friction Stir Welding Parameters Using Response Surface Methodology 22/09/2021 SCMS school of engineering and technology International
13 Conference Participant virtual international conference ICTCEES-2020 18/07/2020 Vimal Jyothi Engineering College, Kannur, Kerala International
14 Conference Presenter International Conference On Advances in Materials, Ceramics & Engineering Sciences (AMCES- 2020) An improved compocasting technique for uniformly dispersed Multi walled carbon nano tube in AA2219 alloy melt 17/01/2020 ICS - Karnataka Chapter and Department of Nanotechnology, VTU International
15 Conference Presenter International conference on advancements in mechanical engineering. Synthesis and characterization of AA7050 with Hbn nano powder by powder metallurgy route. 10/04/2019 Joythi Engineering college, kerala in association with Indian society for technical education. International
16 Conference Presenter 2nd intrnational conference on materials, manufacturing and modelling. Effect of MWCNT concentration on microstructure, mechanical properties and sintering behaviour. 29/03/2019 VIT University International
17 Conference Presenter 9th International conference on materials processing and characterization Effect of sonication in enhancing the distribution uniformity of nano particle in aluminium alloy matrix. 08/03/2019 Elsevier and hosted by Gokaraju Rangaraju Institute of Engineering and Technology International
18 Conference Presenter International conference on advanced ceramics and nnomaterials for sustainable development Self lubricating property of MWCNT in AA2219 composites during high energy ball milling 19/09/2018 Christ University International
19 Conference Presenter International conference on advanced ceramics and nnomaterials for sustainable development Effect of sonication in enhancing the uniformity of MWCNT distribution in aluminium alloy AA2219 matrix 19/09/2018 Christ University International
20 Conference Moderator/Chair International conference on advanced ceramics and nnomaterials for sustainable development 19/09/2018 Christ University International
21 Conference Participant National Conference on Mechanical Engineering and Emerging Technologies 23/02/2018 Christ University National
22 Seminar Participant National seminar on digital transformation in indian industry 10/03/2017 VIT University National
23 Seminar Participant National seminar on enviroment management system and solutions 18/11/2016 VIT University National
24 Conference Presenter First international conference on nanoscience and nanotechnology Influence of MWCNT on Precipitation Hardenable Aluminium Alloy Matrix on Age Hardening and Solutionizing 19/10/2016 VIT University International
25 Conference Participant International Conference and Expo on Magnesium (iMagCon 2016) 04/02/2016 Christ University International
26 Conference Presenter International conference on emerging trends in engineering and management Development and Characterisation of Aluminium Alloy Composites Reinforced With Multi Walled Carbon Nanotube by Powder Metallurgy Route 12/01/2016 Sree Narayana Gurukulam College of Engineering International
27 Symposium Participant Two day national symposium on combating corrosion 03/03/2015 VIT University National
28 Conference Presenter National conference on recent advancements in design and manufacturing systems Comparision on experimental study of weldments of Al 6063 in MIG and TIG welding using taguchis method. 21/03/2013 karpagam university National
29 Conference Participant National conference on research developments in metal joining processes 14/07/2012 Sri Ramakrishna Engineering College Coimbatore (SREC) National
30 Seminar Participant National seminar on Research Development in Metal Joining Process 14/07/2012 Sri Ramakrishna Engineering college (SREC) Coimbatore National
31 Conference Presenter National conference on recent trends in metal joining techniques A survey on minimizing contamination in commercial mass production of metal injection molded pure titanium 30/03/2012 Sri Ramakrishna Engineering College Coimbatore (SREC) National
32 Symposium Participant SHASTR'11 Two day national technical symposium 16/03/2011 Adhiyamaan college of engineering, Hosur National
33 Symposium Presenter National Technical Symposium MECHAMORPHIS'10 Lean Manufacturing for food processing industry in India 18/09/2010 KCG college of technology, Chennai National
34 Seminar Participant Entrepreneurship development 29/07/2010 Adhiyamaan college of engineering, Hosur National
35 Seminar Participant Trends and development in renewable energy source 12/03/2010 Adhiyamaan college of engineering, Hosur National
Sl.No. Title of the Program Name of the Program Date Name of the Institution
1 Nano composites and manufacturing process. International conference on materials, manufacturing and modelling 30/03/2019 VIT University, Vellore
Sl.No. Title Genre Producer Copyrights
Sl.No. Title Guide Name Institution Month Year
1 Synthesis, Microstructure and Mechanical Properties of MWCNT Reinforced AA2219 Composites by Powder Metallurgy. Dr. V. Umasankar VIT University
Sl.No. Title Name of Student Institution Month Year
1 Characterization of Mechanical and Metallurgical Properties of the Dissimilar Weld between Austenitic Stainless Steel and Carbon Steel through Laser Beam Welding KRISHNANUNNI M Christ University July 2021
2 Development and Characterization of hBN and Carbon Fibers Reinforced Precipitation Hardenable Al-Alloy Hybrid Nanocomposites NICE MENACHERY Christ University January 2023
Sl.No. Title of Invention Inventor(s) Filing Date
1 CREPE BANDAGE ROLLER SHIJO THOMAS,REYHAN SCARIYA ISAAC,UJWAL UTHAMAN,RAJEEV REDDY M,JANGAM SASIDHAR,HARISH KUMAR M 06-Jan-2024

Additional information

Title of Invention CREPE BANDAGE ROLLER
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) SHIJO THOMAS,REYHAN SCARIYA ISAAC,UJWAL UTHAMAN,RAJEEV REDDY M,JANGAM SASIDHAR,HARISH KUMAR M
Type of Specification Provisional
Type of Patent
Granted/Awarded Date
Publication/Application Date 26-Apr-2024
Application/Filing Date 06-Jan-2024
IPC Number
Publication Number 17/2024
Patent Number 403946-001
Field of Invention Design
Sl.No. Name of the Research Project Investigator(s) Sponsors Internal/External
1 Development and characterization of metal matrix nanocomposites for automotive using powder metallurgy SHIJO THOMAS Internal
Sl.No. Name of the Conference/Seminar Name of Organiser Level Date
Sl.No. Name of the Workshop/FDP/Training programme Name of Oraganiser Level Role Date
1 Faculty Development Program on AUTODESK FUSION 360 AUTODESK & Department of Mechanical and Automobile Engineering Institutional Participant 16/01/2024
2 AICTE Sponsered DCP Lecture Series Dept: of MECHANICAL & AUTOMOBILE ENGINEEERING AND INDUSTRY INSTITUTE INTERACTION CELL , CHRIST University National Participant 21/01/2023
3 Faculty Development Programme 1 - 2022 Centre for education beyond curriculum & IQAC CHRIST Deemed to be University Institutional Participant 06/07/2022
4 The Art of Doing Research Jyothi Engineering College, Thrissur, India, CHRIST (Deemed to be University), Bangalore, India and Pelita Bangsa University, Indonesia International Participant 12/07/2021
5 Webinar- writing and publishing research article in SCI journals Indra Ganesan college of engineering National Participant 18/07/2020
6 webinar on Education 4.0 : Smart Manufacturing VIT University National Participant 11/07/2020
7 Understanding Tribology of Materials for better deployment in applications IIW India & Pandit Deendayal Petroleum University National Participant 10/07/2020
8 One week Faculty Development program on Additive Manufacturing : The research scope and future treands Santhiram Engineering College, Nandyal National Participant 22/05/2020
9 Learning How to Learn: Powerful mental tools to help you master tough subjects Coursera & Mc Master University International Participant 17/04/2020
10 Material science: 10 things every engineer should know University of California, Davis and Coursera International Participant 13/04/2020
11 Research and modern tool usage Department of mechanical and automobile engineering Institutional Participant 30/05/2019
12 Teaching Pedagogy and Evaluation Process Department of mechanical and automobile engineering Participant 20/05/2019
13 5 days orientation program CHRIST Deemed to be University Participant 14/01/2019
14 Intellectual property rights Department of mechanical and automobile engineering, Faculty of engineering, CHRIST (Deemed to be University) Institutional Participant 06/08/2018
15 Frontier areas in the subject and curriculum updation Department of mechanical and automobile engineering, Faculty of engineering, CHRIST (Deemed to be University) Participant 21/05/2018
16 Training on Pneumatics and Hydraulics (FESTO Automation Laboratory) Christ University Faculty of Engineering Institutional Participant 17/01/2018
17 Tailored and tunable properties of nanomaterials IIT Madras- Global initiative for acedemic networks International Participant 03/03/2016
18 Faculty development programme in concept coaching conducted by ICT academy of kerala ICT academy of kerala National Participant 04/01/2016
19 certificate course on materials characterization IIT Madras National Participant 15/07/2015
20 Use of NMEICT and other e-learning resources for class room teaching National institute of technical teachers training and research Participant 01/06/2015
21 workshop in advanced materials and modern manufacturing techniques Saintgits college of engineering National Participant 25/09/2014
22 Master CAM Coimbatore Industrial Infrastructure Association Institutional Participant 02/04/2013
23 workshop on aplications in mechanical engineering using NI Labview platform - A practical approach Labview National Participant 15/03/2013
24 Simulation of mechanical systems using CFD Tools Sri Ramakrishna Engineering college (SREC) Coimbatore National Participant 03/02/2012
25 Project work on Modification of Double End Boring Machines Kerala Agro Machinery Corporation Ltd. Institutional Participant 01/12/2010
26 In plant training INNOCOAT systems (India) Pvt Ltd Institutional Participant 15/01/2010
27 In plant training Metal Arts, peenya I.A, Bangalore Institutional Participant 13/01/2010
28 In plant training at ordanance factory tiruchirappalli Ordanance factory tiruchirappalli (Gov: of India) Institutional Participant 01/06/2009
29 Entrepreneurship development programme The Indian Institute of Engineers National Participant 12/12/2008
Sl.No. Name of the Awards/Achievements/Others Description Organisation Month/ Year
1 Life Membership in Powder Metallurgy Association of India (PMAI) Powder Metallurgy Association of India (PMAI) 08 December 2016
2 Membership in Indian Society of Mechanical Engineers Indian Society of Mechanical Engineers in association with Indian Society of Engineers and Technicians 02 July 2008
3 Faculty Advisor for REEV 2022 SAEINDIA & IEEE 07 January 2023
Sl.No. Faculties Theme of Consultancy Type
Sl.No. Applicants Title Date Published

CHRIST

(Deemed to be University)

Dharmaram College Post, Hosur Road, Bengaluru - 560029,
Karnataka, India

Tel: +91 804012 9100 / 9600

Fax: 40129000

Email: mail@christuniversity.in

Web: http://www. christuniversity.in

Vision

EXCELLENCE AND SERVICE

Mission

CHRIST (Deemed to be University) is a nurturing ground for an individual's holistic development to make effective contribution to the society in a dynamic environment.

Copyright © CHRIST (Deemed to be University) 2020 | Privacy Policy