Updates:  

Faculty

Profile

 Back

Dr JANGAM SASIDHAR

BTech, MTech, PhD
ASSISTANT PROFESSOR

SCHOOL OF ENGINEERING AND TECHNOLOGY
BANGALORE CAMPUS
 Print Profile

Sl.No. Title Name of Periodical Periodicity Date
1 Youth Day Speach For The Youngsters Sakshi & Eenadu News Papers Daily 13/01/2021
2 Toll Full...Amenities are Nill Sakshi News Paper Daily 07/11/2019
Sl.No. Title Name of Journal Date of Publication Volume No/Issue No/Page No
1 Identification of the functional limitation of marine loading or unloading arm; A case study AIP Conference Proceedings 13-Sep-2023 2764 / 1 / -

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) UMESH V,SHIVAKUMAR S,DARSHAN S M,PAUL. B. THALIATH,V. A. SAJEEV,AKASH PRAKASH,JANGAM SASIDHAR
Title of Article Identification of the functional limitation of marine loading or unloading arm; A case study
Name of Journal AIP Conference Proceedings
Volume No 2764
Issue No 1
Page No -
URL https://pubs.aip.org/aip/acp/article-abstract/2764/1/070012/2911066/Identification-of-the-functional-limitation-of?redirectedFrom=PDF
Indexing Agency Scopus
Date of Publication 13-Sep-2023
2 Developing a steady state wear equation for AA7050 hybrid composites/steel interface at elevated temperature Advances in Materials and Processing Technologies 06-Sep-2023 1 / 1 / 1-16

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) JANGAM SASIDHAR
Title of Article Developing a steady state wear equation for AA7050 hybrid composites/steel interface at elevated temperature
Name of Journal Advances in Materials and Processing Technologies
Volume No 1
Issue No 1
Page No 1-16
URL https://www.tandfonline.com/journals/tmpt20
Indexing Agency Scopus
Date of Publication 06-Sep-2023
3 Experimental and finite element analysis of thermal stress on thermal spray coated AISI 304 stainless steel specimen using low cost solid lubricant International Journal on Interactive Design and Manufacturing 10-Jun-2023 / / -

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) JANGAM SASIDHAR,FRANCIS XAVIER L,B DEEPANRAJ,SHIVAKUMAR S
Title of Article Experimental and finite element analysis of thermal stress on thermal spray coated AISI 304 stainless steel specimen using low cost solid lubricant
Name of Journal International Journal on Interactive Design and Manufacturing
Volume No
Issue No
Page No -
URL https://www.springer.com/journal/12008
Indexing Agency Scopus
Date of Publication 10-Jun-2023
4 Experimental Investigations on Erosion-Corrosion Characteristics of HVOF-Sprayed WC-10% Ni Coatings Deposited on Aluminum Alloy Advances in Materials Science and Engineering 13-Feb-2023 2023 / 1 / 1-16

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) JANGAM SASIDHAR,PRADEEP KUMAR G S
Title of Article Experimental Investigations on Erosion-Corrosion Characteristics of HVOF-Sprayed WC-10% Ni Coatings Deposited on Aluminum Alloy
Name of Journal Advances in Materials Science and Engineering
Volume No 2023
Issue No 1
Page No 1-16
URL https://www.hindawi.com/journals/amse/
Indexing Agency Scopus
Date of Publication 13-Feb-2023
5 Design Optimization of Electrical Connector Assembly using FEA Journal of Mines, Metals and Fuels 12-Aug-2022 70 / 8A / 233-237

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) NIRANJANA S J,RAJINI ROHITH,SHIVAKUMAR S,UMESH V,DARSHAN S M,JANGAM SASIDHAR
Title of Article Design Optimization of Electrical Connector Assembly using FEA
Name of Journal Journal of Mines, Metals and Fuels
Volume No 70
Issue No 8A
Page No 233-237
URL https://www.informaticsjournals.com/index.php/jmmf/article/view/31981
Indexing Agency Scopus
Date of Publication 12-Aug-2022
6 Friction Stir Welding of Dissimilar Aluminium Alloys for Vehicle Structures International Journal of Vehicle Structures and Systems 30-Jan-2022 14 / 1 / 5-9

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) RAMESHA K,P D SUDERSANAN,A C GOWDA,N SANTHOSH,JANGAM SASIDHAR,MANJUNATH N
Title of Article Friction Stir Welding of Dissimilar Aluminium Alloys for Vehicle Structures
Name of Journal International Journal of Vehicle Structures and Systems
Volume No 14
Issue No 1
Page No 5-9
URL https://maftree.org/eja/index.php/ijvss/article/view/1890
Indexing Agency Scopus
Date of Publication 30-Jan-2022
7 Modelling and CFD Simulation of Vortex Bladeless Wind Turbine AIP Conference Proceedings 06-Jan-2022 / 030001 / 1-9

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) UMESH V,SHIVAKUMAR S,JANGAM SASIDHAR
Title of Article Modelling and CFD Simulation of Vortex Bladeless Wind Turbine
Name of Journal AIP Conference Proceedings
Volume No
Issue No 030001
Page No 1-9
URL https://aip.scitation.org/doi/abs/10.1063/5.0076790
Indexing Agency Scopus
Date of Publication 06-Jan-2022
8 The Design and Analysis of Helical Cross ? Axis Wind Turbine AIP Conference Proceedings 06-Jan-2022 / / 1-10

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) UMESH V,SHIVAKUMAR S,JANGAM SASIDHAR
Title of Article The Design and Analysis of Helical Cross ? Axis Wind Turbine
Name of Journal AIP Conference Proceedings
Volume No
Issue No
Page No 1-10
URL https://aip.scitation.org/doi/abs/10.1063/5.0076863
Indexing Agency Scopus
Date of Publication 06-Jan-2022
9 Design and Optimization of the Process Parameters for Fusion Deposition Modelling by Experimental and Finite Element Approach AIP Conf. Proceedings 06-Jan-2022 2421 / 1 / 1-8

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) JANGAM SASIDHAR,UMESH V,RAMESHA K,SANTHOSH N
Title of Article Design and Optimization of the Process Parameters for Fusion Deposition Modelling by Experimental and Finite Element Approach
Name of Journal AIP Conf. Proceedings
Volume No 2421
Issue No 1
Page No 1-8
URL https://aip.scitation.org/doi/abs/10.1063/5.0076809
Indexing Agency Scopus
Date of Publication 06-Jan-2022
10 Design and optimization of the process parameters for friction stir welding of dissimilar aluminium alloys Engineering and Applied Science Research 23-Sep-2020 48 / 3 / 257-267

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) JANGAM SASIDHAR,RAMESHA K,SUDHARSHAN P D,SANTHOSH N
Title of Article Design and optimization of the process parameters for friction stir welding of dissimilar aluminium alloys
Name of Journal Engineering and Applied Science Research
Volume No 48
Issue No 3
Page No 257-267
URL https://ph01.tci-thaijo.org/index.php/easr/article/view/241021
Indexing Agency Scopus
Date of Publication 23-Sep-2020
11 Effect of multiwalled carbon nanotube alignment on the tensile fatigue behavior of nanocomposites journal of composite materials 11-Dec-2017 / - / -

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) JANGAM SASIDHAR,S RAJA,K HEMACHANDRA REDDY
Title of Article Effect of multiwalled carbon nanotube alignment on the tensile fatigue behavior of nanocomposites
Name of Journal journal of composite materials
Volume No
Issue No -
Page No -
URL http://journals.sagepub.com/doi/abs/10.1177/0021998317745585
Indexing Agency Scopus
Date of Publication 11-Dec-2017
12 Influence of multiwall carbon nanotube alignment on vibration damping of nanocomposites Journal of Reinforced Plastics and Composites 18-Jan-2016 35 / 8 / 617-627

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) JANGAM SASIDHAR,S RAJA,B UMA MAHESWAR GOWD
Title of Article Influence of multiwall carbon nanotube alignment on vibration damping of nanocomposites
Name of Journal Journal of Reinforced Plastics and Composites
Volume No 35
Issue No 8
Page No 617-627
URL http://journals.sagepub.com/doi/abs/10.1177/0731684415626285
Indexing Agency Scopus
Date of Publication 18-Jan-2016
Sl.No. Title URL Subject Month Year
1 Condition of National Highways in India https://sasi-nit.blogspot.com/2021/03/blog-post.html Condition of National Highways in India
Sl.No. Type of Book Title Title of Book ISBN Month Year
Sl.No. Type of Book Title of Chapter/Article ISBN Month Year
1 Text book Development of high performance polymer composites by additive manufacturing 9781668460092 May 2023

Additional information

Type of Book Text book
Type of Work Chapter
Sole Authored/Co Authored Co-Authored
Author Name (s) JANGAM SASIDHAR,PRADEEP KUMAR G S ,SACHITH T.S,SHIVAKUMAR S,GURUMOORTHY S HEBBAR
Title of Book Development, Properties, and Industrial Applications of 3D Printed Polymer Composites
Title of Book/Chapter/Article/Case Study) Development of high performance polymer composites by additive manufacturing
Month/Year May/2023
ISBN 9781668460092
Pages 220 - 238
Publishing Company/Institution igi-global
Indexing Agency Scopus
Level International publisher
2 Text book Mechanical and tribological properties of polymer composites developed by FDM 9781668460092 May 2023

Additional information

Type of Book Text book
Type of Work Chapter
Sole Authored/Co Authored Co-Authored
Author Name (s) JANGAM SASIDHAR,PRADEEP KUMAR G S ,SACHITH T.S,M MRUTHUNJAYA,HARISH KUMAR M,RAGHU YOGARAJU,R. KESHAVAMURTHY,VIJAY TAMBRALLIMATH,J. PAULO DAVIM
Title of Book Development, Properties, and Industrial Applications of 3D Printed Polymer Composites
Title of Book/Chapter/Article/Case Study) Mechanical and tribological properties of polymer composites developed by FDM
Month/Year May/2023
ISBN 9781668460092
Pages 53 - 65
Publishing Company/Institution igi-global
Indexing Agency Scopus
Level International publisher
Sl.No. Type of Book Title Title of Case Study ISBN Month Year
Sl.No. Title Abstract Objectives Type Sponsors
Sl.No. Title Place of Publication ISBN No. Month Year
Sl.No. Type of Program Role Name of Program Title of Paper Date Organising Institution Level
1 Seminar Participant ASME Meed 01/04/2023 PES University, Bangalore International
2 Conference Presenter International Conference on Recent Developments in Mechanical Engineering (ICRDME-2022) Development Of Thin Coating On Hydraulic Cylinders Using Laser Cladding For Heavy-Duty Applications 24/06/2022 Siddaganga Institute of Technology, Tumakuru International
3 Conference Presenter International Conference on Advanced Technologies in Chemical, Construction and Mechanical Sciences (iCATCHCOME 2022) ?Design and Structural Analysis of Blade-Less Wind Turbine" 24/03/2022 KPR Institute of Engineering & Technology, Coimbatore, Tamil Nadu International
4 Conference Presenter International Conference on Advanced Technologies in Chemical, Construction and Mechanical Sciences (iCATCHCOME2022) Design and Structural Analysis of Blade-Less Wind Turbine 24/03/2022 KPR Institute of Engineering & Technology, Coimbatore, Tamil Nadu International
5 Conference Presenter International Conference on Advanced Technologies in Chemical, Construction and Mechanical Sciences (iCATCHCOME2022) Identification of the Functional Limitation of Marine Loading or Unloading Arm; A Case Study 24/03/2022 KPR Institute of Engineering & Technology, Coimbatore, Tamil Nadu International
6 Conference Presenter Advanced Technologies in Chemical, Construction and Mechanical Sciences(iCATCHCOME 20 Design and Structural Analysis of Blade-Less Wind Turbine 24/03/2022 K P R Institute of Engineering & Technology, Coimbatore International
7 Conference Participant 4th International Congress on Advances in Mechanical Sciences 26/11/2021 Vardhaman College of Engineering, Hyderabad Institutional
8 Seminar Participant 3D Printing-The Next Industrial Revolution 13/08/2021 Christ University Institutional
9 Conference Presenter International Conference on Innovations in Mechanical Sciences (ICIMS 21) Sustainable processing of dissimilar aluminium alloy joints by friction stir welding 19/02/2021 Adi Shankara Institute of Engineering and Technology, Kalady International
10 Conference Panelist Computational Intelligence and Communication Networks 26/11/2020 Christ University International
11 Conference Presenter 2nd International (Virtual) Conference on Recent Trends in Technology, Engineering and Applied Science [ICRTTEAS] Design and Structural Mechanics of a Modified Wood ? Composite Integrated Propeller Blade 24/07/2020 Dr. T Thimmaiah Institute of Technology International
12 Conference Presenter International Conference on Advances in Materials, Ceramics & Engineering Sciences DESIGN OF AIRCRAFT COMPOSITE PROPELLER BLADES 17/01/2020 Dayananda Sagar College of Engineering International
13 Conference Presenter Innovations and Challenges in Science and Technology Modal Analysis of Flexible Fibers Using 3D Digital Image Correlation-A Novel pproach 19/12/2019 Don Bosco Institute of Technology, Bangalore International
14 Conference Presenter International Conference on Advanced Ceramics and Nanomaterials for Sustainable Development (ACeND 2018) Tensile, Fatigue and Vibration Damping Characteristics of Glass Fiber Reinforced Composites with Aligned Multi-Walled Carbon Nanotubes 19/09/2018 Christ University International
15 Conference Presenter Sustainable Energy and Environmenatal Challenges (SEEC-2018) Sustainable Energy and Environmental Challenges 31/12/2017 Christ University International
16 Conference Presenter International Conferacne on Current Trends in Engineering and Technology Clean And Green Energy From Gravitational Forces - A Novel Approach 03/12/2017 Christ University International
17 Conference Presenter 2nd International Conference & Exhibition on Fatigue, Durability and Fracture Mechanics The Tensile Fatigue Behavior of Aligned MWNT/Epoxy Nanocomposites 28/09/2016 National Aerospace Laboratories Institutional
18 Presenter International Conference on Advanced Materials and Applications 2016 (ICAMA-2016)) Fabrication & Characterization of Hybrid fibers and Hybrid Fiber reinforced composites ? A Novel Approach 15/06/2016 National Aerospace Laboratories International
19 Conference Presenter National Conference on Carbon Materials 2015 (NCCM 2015)) Study of Vibration Damping of Nanocomposites With Aligned MWNT Networks 26/11/2015 National Aerospace Laboratories National
20 Conference Participant International Conference & Exhibition on Fatigue, Durability and Fracture Mechanics 28/05/2015 Jawaharlal Nehru Technological University(J.N.T.U), Anantapur International
21 Symposium Participant 5th National Symposium for Materials Research Scholars MR13 08/05/2013 National Aerospace Laboratories National
Sl.No. Title of the Program Name of the Program Date Name of the Institution
Sl.No. Title Genre Producer Copyrights
Sl.No. Title Guide Name Institution Month Year
1 Study of Vibration Damping of Nanocomposites With Aligned MWNT Networks Dr. S. Raja Jawaharlal Nehru Technological University(J.N.T.U)
Sl.No. Title Name of Student Institution Month Year
1 Investigation on Properties of AA7050 Matrix Composites for Main Landing Gear Links NAGARAJA T K Christ University June 2022
Sl.No. Title of Invention Inventor(s) Filing Date
1 COVER AND STAND (SET) FOR WASHING MACHINE JANGAM SASIDHAR,UMESH V,SHIVAKUMAR S,KIRAN K,RAVIKUMAR R,ANSHUL DAHIYA (2067201),SYED MOHAMMED (2067204) 01-Apr-2022

Additional information

Title of Invention COVER AND STAND (SET) FOR WASHING MACHINE
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) JANGAM SASIDHAR,UMESH V,SHIVAKUMAR S,KIRAN K,RAVIKUMAR R,ANSHUL DAHIYA (2067201),SYED MOHAMMED (2067204)
Type of Specification Complete
Type of Patent
Granted/Awarded Date 10-Mar-2023
Publication/Application Date 01-Apr-2022
Application/Filing Date 01-Apr-2022
IPC Number
Publication Number 10-2023
Patent Number 361722-001
Field of Invention MECHANICAL DESIGN
2 AUTOMATED PAINTING MACHINE JANGAM SASIDHAR,UMESH V,SHIVAKUMAR S,GURUMOORTHY S HEBBAR,ANSHUL DAHIYA (2067201),SYED MOHAMMED K (2067204) 01-Apr-2022

Additional information

Title of Invention AUTOMATED PAINTING MACHINE
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) JANGAM SASIDHAR,UMESH V,SHIVAKUMAR S,GURUMOORTHY S HEBBAR,ANSHUL DAHIYA (2067201),SYED MOHAMMED K (2067204)
Type of Specification Complete
Type of Patent
Granted/Awarded Date 16-Mar-2023
Publication/Application Date 17-Mar-2022
Application/Filing Date 01-Apr-2022
IPC Number
Publication Number 11-2023
Patent Number 361723-001
Field of Invention MECHANICAL DESIGN
3 Processing Low-Cost Feedstock?s into High Quality Biodiesel with a Novel Chemical Multi-Functional Process Intensifier Method RAVIKUMAR R,KIRAN K,GURUMOORTHY S HEBBAR,JANGAM SASIDHAR,RAMESHA K,HARISH KUMAR M,UMESH V 24-Dec-2021

Additional information

Title of Invention Processing Low-Cost Feedstock?s into High Quality Biodiesel with a Novel Chemical Multi-Functional Process Intensifier Method
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) RAVIKUMAR R,KIRAN K,GURUMOORTHY S HEBBAR,JANGAM SASIDHAR,RAMESHA K,HARISH KUMAR M,UMESH V
Type of Specification Provisional
Type of Patent
Granted/Awarded Date
Publication/Application Date 07-Jan-2022
Application/Filing Date 24-Dec-2021
IPC Number
Publication Number 202141060717
Patent Number 202141060717
Field of Invention CHEMICAL
4 AUTOMATIC FERTILIZER DISPENSER ROBOT JANGAM SASIDHAR,KIRAN K,RAVIKUMAR R,RAMESHA K 06-Jun-2021

Additional information

Title of Invention AUTOMATIC FERTILIZER DISPENSER ROBOT
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) JANGAM SASIDHAR,KIRAN K,RAVIKUMAR R,RAMESHA K
Type of Specification Complete
Type of Patent
Granted/Awarded Date 07-Feb-2022
Publication/Application Date 11-Feb-2022
Application/Filing Date 06-Jun-2021
IPC Number
Publication Number 06/2022
Patent Number 354319-001
Field of Invention Mechanical Design
Sl.No. Name of the Research Project Investigator(s) Sponsors Internal/External
1 Sustainable Engineering Club and its Activities JANGAM SASIDHAR, HARISH KUMAR M AICTE External
2 Development of cost -effective solution for coatings on steel substrate using laser cladding for industrial applications JANGAM SASIDHAR, RAMESHA K,UMESH V Internal
Sl.No. Name of the Conference/Seminar Name of Organiser Level Date
Sl.No. Name of the Workshop/FDP/Training programme Name of Oraganiser Level Role Date
1 Supervised Machine Learning Principles and Practices-Python Udemy International Participant 19/03/2023
2 Rapid Prototyping for Product Design LinkedIn Learning International Participant 06/03/2023
3 Mike Hathorn 3D Printing in the Classroom LinkedIn Learning Participant 25/02/2023
4 DCP Lecture Series Christ University National Organiser & Participant 17/02/2023
5 Three Days Workshop on Building of Robots and Drones Christ University National Participant 09/02/2023
6 Learning Design for Sustainability LinkedIn Learning International Participant 26/01/2023
7 Sustainability Strategies LinkedIn Learning International Participant 12/01/2023
8 REEV 2022 FINALS Christ University National Invited Resource Person/Trainer 07/01/2023
9 Synergistic Training program Utilizing the Scientific and Technological Infrastructure MANIPAL INSTITUTE OF TECHNOLOGY International Participant 05/01/2023
10 Development Program on Curriculum Design and Revision with specific focus on OBE Christ University Institutional Participant 05/12/2022
11 Interdisciplinary Approaches and Adopting the Transition Christ University Institutional Participant 27/05/2022
12 Accreditation and Strategic Building Christ University Institutional Participant 24/03/2022
13 Five Day Virtual Short Term Training Program (STTP) on MATLAB MVJ College of Engineering, Bangalore National Participant 14/09/2021
14 Material Synthesis and Characterization-Research Prospectus and Optimization Techniques MVJ College of Engineering, Bangalore National Participant 24/08/2021
15 Artificial Intelligence & Machine Learning(Beginner) CHRIST (Deemed to be University), Bangalore National Participant 02/10/2020
16 Ultrafine grained materials: Old material with futuristic properties Francis Xavier Engineering College Participant 04/07/2020
17 X-Ray diffraction and its applications Reva University Participant 03/07/2020
18 SOLIDWORKS Simulation: Dynamic Analysis LinkedIn Learning Participant 06/05/2020
19 Machine Design Part-1 Coursera International Participant 01/05/2020
20 Solidworks Advanced Simulation LinkedIn Learning Participant 01/05/2020
21 SOLIDWORKS 2019 Essential Training LinkedIn Learning Participant 01/05/2020
22 Create Your First Python Program Coursera International Participant 28/04/2020
23 Electric Vehicles The Automotive Research Association of India Participant 24/04/2020
24 Online Teaching CHRIST (Deemed to be University), Bangalore Participant 22/04/2020
25 Learning Matlab LinkedIn Learning Participant 18/04/2020
26 Cameras, Exposure and Photography Coursera International Participant 15/04/2020
27 Introduction to Basic Vibrations Coursera International Participant 02/04/2020
28 Learning to Teach Online Coursera International Participant 16/03/2020
29 English Functional Grammer Udemy Participant 06/02/2020
30 NLP-An Effective Guide To Nero-Linguistic Programming Udemy Participant 02/02/2020
31 One Week FDP on Advanced Materials & Applications New Horizon College of Engineering International Participant 30/12/2019
32 The Complete Python 3 Course: Beginner to Advanced! Udemy Participant 23/12/2019
33 Document Type Setting Using LATEX Nitte Meenakshi Institute of Technology, Bangalore National Participant 09/12/2019
34 To Day Workshop on Research and Modern Tools Usage CHRIST (Deemed to be University), Bangalore Institutional Participant 30/05/2019
35 ProductDesignEngineeringusingFusion360 ICT Academy & Nitte Meenakshi Institute Of Technology, Bangalore National Participant 03/01/2019
36 Nero Linguistic Programe (Level1 & 2) Mind Master & CHRIST Consulting Group National Participant 28/11/2018
37 IPR SEMINAR 2018 Dept.of Mechanical & Automobile Engg., CHRIST (Deemed to be University) Institutional Invited Resource Person/Trainer 07/08/2018
38 Intellectual Property Rights Dept.of Mechanical & Automobile Engg., CHRIST (Deemed to be University) Institutional Participant 06/08/2018
39 QIP 2018 Faculty of Engineering, CHRIST (Deemed to be University) Participant 21/05/2018
40 Workshop on Polymer Matrix Composites Center of Excellence in Advanced Materials Research, BMS College of Engineering, Bangalore, India International Participant 15/06/2016
Sl.No. Name of the Awards/Achievements/Others Description Organisation Month/ Year
1 International Human Rights Council - IHRC Became the member for the IHRC Andhra Pradesh Board International Human Rights Council 04 April 2019
2 Citizen of the village Citizen of the village Pamidi Gram Panchayat 26 January 2021
3 Covid - Citizen Qusrantine Squad Citizen quarantine squad during COVID outbreak. Bruhat Bengaluru Mahanagara Palike - BBMP 04 May 2020
Sl.No. Faculties Theme of Consultancy Type
Sl.No. Applicants Title Date Published

CHRIST

(Deemed to be University)

Dharmaram College Post, Hosur Road, Bengaluru - 560029,
Karnataka, India

Tel: +91 804012 9100 / 9600

Fax: 40129000

Email: mail@christuniversity.in

Web: http://www. christuniversity.in

Vision

EXCELLENCE AND SERVICE

Mission

CHRIST (Deemed to be University) is a nurturing ground for an individual's holistic development to make effective contribution to the society in a dynamic environment.

Copyright © CHRIST (Deemed to be University) 2020 | Privacy Policy
Website Developed by Cloud Business Pages from INI Technologies Pvt Ltd., Kochi, India