Faculty

Profile

 Back

Dr IVAN SUNIT ROUT

BTech, MTech, PhD
ASSISTANT PROFESSOR

MECHANICAL AND AUTOMOBILE ENGINEERING
SCHOOL OF ENGINEERING AND TECHNOLOGY
BANGALORE CAMPUS
 Print Profile

Sl.No. Title Name of Periodical Periodicity Date
1 Education boon through online media-cut across pandemic State Herald-An alternative Media Daily 06/02/2021
2 Disturbing policies of the education system-the hidden agenda of Right Wing Brigade State Herald-An alternative Media Daily 18/02/2019
Sl.No. Title Name of Journal Date of Publication Volume No/Issue No/Page No
1 The effect of cutting fluid in improving the machinability of Inconel 718 using ceramic AS20 tool Materials Today Proceedings 19-Jun-2021 49 / Part 5 / 1169-1174

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,ANIL RAJ,ANIL MELWYN REGO
Title of Article The effect of cutting fluid in improving the machinability of Inconel 718 using ceramic AS20 tool
Name of Journal Materials Today Proceedings
Volume No 49
Issue No Part 5
Page No 1169-1174
URL https://www.scopus.com/authid/detail.uri?authorId=57202790450
Indexing Agency Scopus
Date of Publication 19-Jun-2021
2 Experimental study of response parameters during machining of Inconel 718 with cryogenically treated ceramic round tool using cutting fluid Materials Today Proceedings 17-May-2021 47 / Part 14 / 4281-4287

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,ANIL RAJ
Title of Article Experimental study of response parameters during machining of Inconel 718 with cryogenically treated ceramic round tool using cutting fluid
Name of Journal Materials Today Proceedings
Volume No 47
Issue No Part 14
Page No 4281-4287
URL https://www.sciencedirect.com/journal/materials-today-proceedings
Indexing Agency Scopus
Date of Publication 17-May-2021
3 Optimization of friction stir welding parameters during joining of AA3103 and AA7075 aluminium alloys using Taguchi method Materials Today Proceedings 01-May-2021 / / -7

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,ANIL RAJ,PRATAP KUMAR,ANIL MELWYN REGO
Title of Article Optimization of friction stir welding parameters during joining of AA3103 and AA7075 aluminium alloys using Taguchi method
Name of Journal Materials Today Proceedings
Volume No
Issue No
Page No -7
URL https://authors.elsevier.com/a/1ck3E_oMxzEpJL
Indexing Agency Scopus
Date of Publication 01-May-2021
4 Variable parametric test to improve the machinability of Inconel-718 using Tungsten Carbide tool Materials Today Proceedings 12-Mar-2021 47 / / 5564 -5569

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,ANIL RAJ
Title of Article Variable parametric test to improve the machinability of Inconel-718 using Tungsten Carbide tool
Name of Journal Materials Today Proceedings
Volume No 47
Issue No
Page No 5564 -5569
URL https://authors.elsevier.com/tracking/article/details.do?aid=24240&jid=MATPR&surname=ROUT
Indexing Agency Scopus
Date of Publication 12-Mar-2021
5 Influence of cryogenic treatment of cutting tool inserts on tool wear and surface roughness during milling of Inconel 718 AIP Conference Proceedings 05-Oct-2020 2274 / 03004 / 1-5

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,MANISH MATHEW,KEVIN LOBO IVAN,SHOMYAJIT MISRA
Title of Article Influence of cryogenic treatment of cutting tool inserts on tool wear and surface roughness during milling of Inconel 718
Name of Journal AIP Conference Proceedings
Volume No 2274
Issue No 03004
Page No 1-5
URL https://www.scopus.com/authid/detail.uri?authorId=57202790450
Indexing Agency Scopus
Date of Publication 05-Oct-2020
6 Parametric Analysis Of Response Variables For Improving The Machining Characteristics Of Inconel 718 Using Ceramic Inserts International Journal of Mechanical and Production Engineering Research and Development 03-Dec-2019 9 / Special Issue / 106-113

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,ANIL RAJ,SHOMYAJIT MISRA, FINAL YEAR STUDENT BATCH2016-2020,VISHAL PATIL, FINAL YEAR STUDENT BATCH 2016-2020
Title of Article Parametric Analysis Of Response Variables For Improving The Machining Characteristics Of Inconel 718 Using Ceramic Inserts
Name of Journal International Journal of Mechanical and Production Engineering Research and Development
Volume No 9
Issue No Special Issue
Page No 106-113
URL http://www.tjprc.org/conference-archives.php?year=&cid=&tid=&jname=67_2&e_type=Special%20Issue&page=31
Indexing Agency Scopus
Date of Publication 03-Dec-2019
7 Analysis of Machining Parameters for Face Milling of Inconel 718 using Response Surface Methodology International Journal of Recent Technology and Engineering 31-May-2019 8 / 1S2 / 75-78

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,SACHIN KATTOOKAREN,SANATH VIMAL M
Title of Article Analysis of Machining Parameters for Face Milling of Inconel 718 using Response Surface Methodology
Name of Journal International Journal of Recent Technology and Engineering
Volume No 8
Issue No 1S2
Page No 75-78
URL https://www.ijrte.org/download/volume-8-issue-1s2/
Indexing Agency Scopus
Date of Publication 31-May-2019
8 Parametric investigation of machining parameters in determining the machinability of Inconel 718 using taguchi technique and grey relational analysis Procedia Computer Science 20-Jul-2018 133 / / 786-792

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P
Title of Article Parametric investigation of machining parameters in determining the machinability of Inconel 718 using taguchi technique and grey relational analysis
Name of Journal Procedia Computer Science
Volume No 133
Issue No
Page No 786-792
URL https://www.sciencedirect.com/journal/procedia-computer-science
Indexing Agency Scopus
Date of Publication 20-Jul-2018
9 Selection of cutting parameters for the machinability of Inconel 718 using Grey Relational Analysis Matec Web of Conferences 12-Jun-2018 172 / / 1-5

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P
Title of Article Selection of cutting parameters for the machinability of Inconel 718 using Grey Relational Analysis
Name of Journal Matec Web of Conferences
Volume No 172
Issue No
Page No 1-5
URL https://www.matec-conferences.org/articles/matecconf/abs/2018/31/matecconf_icdams2018_04004/matecconf_icdams2018_04004.html
Indexing Agency Web of Science and Scopus
Date of Publication 12-Jun-2018
Sl.No. Title URL Subject Month Year
1 Online Education a vaccine to students and tutors during COVID 19 pandemic https://ivansunitrout.wordpress.com/2021/02/04/online-education-a-vaccine-to-students-and-tutors-during-covid-19-pandemic/ Online Education
2 Challenges of Engineering Education in India https://54319.home.blog/2020/02/24/challenges-of-engineering-education-in-india/ Engineering Education
Sl.No. Type of Book Title Title of Book ISBN Month Year
Sl.No. Type of Book Title of Chapter/Article ISBN Month Year
Sl.No. Type of Book Title Title of Case Study ISBN Month Year
Sl.No. Title Abstract Objectives Type Sponsors
Sl.No. Title Place of Publication ISBN No. Month Year
Sl.No. Type of Program Role Name of Program Title of Paper Date Organising Institution Level
1 Conference Presenter International Conference on Contemporary Innovations in Mechanical Engineering (CIME 2022) An investigation to the hardness of the cutting tool during machining Inconel 718 due to the cryogenic effect 22/04/2022 RGM College of Engineering and Technology, Nandyal 518501, Andhra Pradesh International
2 Conference Presenter International Confer Ence On Civil, Mechanical And Environmental Engineering Technolog Ies 2022 New frontiers of friction stir welding and its applications in Joining dissimilar materials 11/04/2022 SVS college of engineering and technology, Coimbatore International
3 Seminar Participant Ethics for Sustainable Collaborative Research 12/03/2022 Christ University Institutional
4 Conference Co-presenter International Conference on Recent Advances in Engineering Materials (ICRAEM 2022) 03/03/2022 Alva's Institute of Engineering and Technology International
5 Conference Co-presenter International Conference on Recent Advances in Engineering Materials (ICRAEM 2022) 03/03/2022 Alva's Institute of Engineering and Technology, Moodbidri, Karnataka, India International
6 Seminar Participant Body Wearable and Implantable Antennas 19/02/2022 Christ University National
7 Seminar Participant Using Design Thinking to Rethink, Reimagine and Reinvent Our Future 18/02/2022 Christ University International
8 Seminar Participant Inter-Multi-Disciplinary Research Paradigms and Methodological Approaches in Sustainable Built Environment Studies 12/02/2022 Christ University National
9 Seminar Participant How To Turn An Idea Into A Patent 19/11/2021 Christ University National
10 Conference Co-presenter 3rd International Conference on Manufacturing, Material Science and Engineering (ICMMSE 2021) 24/09/2021 CMR Institute of Technology, Hyderabad, Telangana International
11 Conference Presenter International conference on computing in mechanical engineering Prediction of Friction Stir Welding Parameters Using Response Surface Methodology 22/09/2021 SCMS school of engineering and technology International
12 Seminar Participant Attracting grants and funds for research 14/09/2021 Wiley India Pvt Ltd National
13 Seminar Participant Award-winning NAAC Accreditation Data Management System 09/09/2021 Inpods USA National
14 Seminar Participant Metal-organic frameworks: Structural characterization for surface area, pore size and high-pressure gas storage 07/09/2021 Anton Paar India Pvt Ltd National
15 Seminar Participant Winning the game of publishing research papers, raising your profile, and extending the impact of your publications 07/09/2021 Wiley India Pvt Ltd National
16 Seminar Participant Mastering the craft of academic writing: A systematic approach 31/08/2021 Wiley-India Pvt Ltd National
17 Seminar Participant AI and ML for core Departments with focus on current Industrial trends 27/08/2021 Christ University International
18 Seminar Participant Conquering the intricacies of citations and references 24/08/2021 Wiley-India Pvt Ltd National
19 Seminar Participant Cost of Quality & Lean Six Sigma 23/08/2021 Vision Excellence Pvt Ltd National
20 Seminar Participant How AI is influencing the future of self-driving car technology 21/08/2021 Imarticus Learning Pvt Ltd National
21 Seminar Participant The Need for Thinking out of the Box 15/08/2021 English Language Teachers Association of India (ELTAI), Chennai National
22 Seminar Participant Role of IEEE in Engineering - Various IEEE Societies, Standards and Data Center 14/08/2021 Christ University National
23 Seminar Participant 3D Printing- The Next Industrial Revolution 13/08/2021 Christ University International
24 Seminar Participant All about Open Source Software for Teaching and Learning 09/08/2021 Cheran College of Engineering, Karur, TamilNadu National
25 Conference Participant The Xseed Conference: Choose Success (India Edition) 07/08/2021 Xseed Education Pvt Ltd National
26 Seminar Participant Empowering Teachers to Integrate Technology: Challenges and Solutions 01/08/2021 English Language Teachers Association of India (ELTAI), Chennai National
27 Conference Presenter 2021 Global Conference on Recent Advances in Sustainable Materials (GC-RASM 2021) The Effect of Cutting Fluid in Improving the Machinability of Inconel 718 using Ceramic AS20 Tool 29/07/2021 A.J. Institute of Engineering and Technology, Mangalore, India International
28 Conference Co-presenter Global Conference on Recent Advances in Sustainable Materials (GC-RASM 2021) 29/07/2021 A.J. Institute of Engineering & Technology, Karnataka, India International
29 Seminar Participant Application of Lean Six Sigma in Manufacturing 23/07/2021 Christ University International
30 Seminar Participant Ecosystem Restoration 05/06/2021 Christ University National
31 Seminar Participant World Environment Day on the theme Ecosystem Restoration 05/06/2021 Mizoram University National
32 Seminar Participant NEP 2020: Reforming Higher Education 04/06/2021 SRM Institute of Science and Technology, Chennai National
33 Seminar Participant COVID 19: Disruption of life process impacting mental health 03/06/2021 Department of Clinical Psychology, Mizoram University Aizawl National
34 Seminar Participant Program Design Concepts-NAAC and NEP 2020 19/05/2021 Inpods Ed-Tech Ltd National
35 Seminar Participant Innovation and Technology Integration Towards Patent Filing 06/05/2021 Christ University National
36 Seminar Participant Manage to curb Pandemic: Prevention and Control 05/05/2021 Christ University Institutional
37 Conference Co-presenter International Conference on Futuristic Research in Engineering Smart Materials (FRESM 21) 23/04/2021 CMRIT, Bengaluru International
38 Seminar Participant Program Design Concepts based on OBE Criteria 1 of NAAC 22/04/2021 Inpods India Private Limited Regional
39 Seminar Participant Transformation of Research work into patent filing 07/04/2021 Christ University Institutional
40 Seminar Participant Design, Modeling and Simulation of Solar Thermal, Solar PV and PVT Hybrid systems using POLYSUN simulation software 15/01/2021 IndiaSoft Technologies Pvt Ltd, Pune National
41 Seminar Participant AI, ML and DL for Researchers 05/12/2020 Christ University Regional
42 Seminar Participant MATLAB and Optimization Techniques for Researchers 28/11/2020 Christ University Institutional
43 Conference Presenter 3 International e-Conference on Frontiers in Mechanical Engineering and nanoTechnology [ICFMET-2020] Variable parametric test to improve the machinability of Inconel 718 using Tungsten Carbide tool 27/11/2020 Sanjeevan Engineering & Technology Institute, Panhala & Yashwantrao Patil Science College, Solankur International
44 Conference Presenter 3rd International e-Conference on Frontiers in Mechanical Engineering and nanoTechnology [ICFMET-2020] held on 27 & 28 Nov. 2020 Variable parametric test to improve the machinability of Inconel 718 using Tungsten Carbide tool 27/11/2020 Sanjeevan Engineering & Technology Institute, Panhala & Yashwantrao Patil Science College, Solankur International
45 Seminar Participant Applications of Collaborative Robots 29/10/2020 Bharath Institute of Higher Education and Research, Chennai National
46 Seminar Participant Machine Learning 24/10/2020 Christ University National
47 Seminar Participant Trends and Developments in Robotics 23/10/2020 Christ University International
48 Conference Participant Frontiers in Manufacturing Technology (FMT 2020) 13/10/2020 Kalinga Institute of Industrial Technology (KIIT), Deemed to be University, Bhubaneswar, Odisha, India International
49 Seminar Participant Redefining the Service Robots after COVID-19 : Shift in Enhancing Service to Essential Service 19/09/2020 Christ University International
50 Seminar Participant Latest Trends in Research and Publication in Manufacturing Engineering 12/09/2020 Christ University International
51 Seminar Participant Manipulators in Robotics - Research Applications 05/09/2020 Christ University International
52 Seminar Participant Design of Nonlinear Vibration Control systems for Robotics applications 03/09/2020 Christ University International
53 Seminar Participant Industry Automation and Robotics: Challenges and Opportunities 28/08/2020 Christ University International
54 Seminar Participant Writing and Publishing Research Articles in SCI Journals - A Framework 19/08/2020 RajaRajeswari College of Engineering, Bangalore National
55 Seminar Participant Design Basics of Electric Vehicles 17/08/2020 Christ University National
56 Seminar Participant Effective and practical journey towards NBA Accreditation 17/08/2020 Ideal College of Pharmacy and Research, Kalyan National
57 Seminar Participant Future of I.C.Engine 05/08/2020 Christ University International
58 Seminar Participant Techno Legal Summit on CAP (Cyber, AI and Patents) 03/08/2020 St Joseph Engineering College and S D M Law College, Mangaluru National
59 Seminar Participant Counselling services during COVID 19 Pandemic Period 30/07/2020 Indra Ganesan Group of Instituitions, Manikandam, Tiruchirappalli National
60 Seminar Participant Managing Hyperactivity During COVID 19 29/07/2020 Indra Ganesan Group of Instituitions, Manikandam, Tiruchirappalli National
61 Seminar Participant Take away from the Pandemic 28/07/2020 Indra Ganesan Group of Instituitions, Manikandam, Tiruchirappalli National
62 Seminar Participant Innovations for Atmanirbaratha for Electric Vehicles 24/07/2020 Christ University National
63 Seminar Participant Writing and Publishing Research Articles in SCI journals 18/07/2020 Indra Ganesan Instituitions, Manikandam, Tiruchirappalli National
64 Seminar Participant V2X Communication 10/07/2020 Christ University National
65 Symposium Participant 3D Printing Technology 08/07/2020 A J Institute of Engineering and Technology, Mangaluru National
66 Symposium Participant Mechanical Behavior of Materials 01/07/2020 Chennai Institute of Technology National
67 Seminar Participant Technology and Business in Current Scenario 26/06/2020 Christ University Regional
68 Seminar Participant Innovation in Advanced Materials Processing and Manufacturing (IAMPM 2020) 24/06/2020 Centre for Innovation Manufacturing Research, VIT Vellore International
69 Seminar Participant EV and Energy Storage Devices in Electric Distribution Systems 20/06/2020 Christ University National
70 Seminar Participant Prospects in optimisation techniques: Local and global aspects 19/06/2020 Rajarajeswari College of Engineering, Bangalore National
71 Symposium Participant Engineering Graphics 19/06/2020 B.L.D.E.A's V.P.Dr.P.G. Halakatti College of Engineering and Technology, Vijayapura, Karnataka National
72 Conference Co-presenter International Conference on Novelty in Applied Science, Engineering and Technology (ICNAET 2020) 17/06/2020 New Prince Shri Bhavani College of Engineering and Technology, Chennai International
73 Seminar Participant Principles of Automotive Dynamics and Control 15/06/2020 Christ University National
74 Symposium Participant NAAC Revised Accreditation Framework 10/06/2020 Dr. Ambedkar College of Arts, Commerce and Science, Chandrapur National
75 Seminar Participant Intellectual Property Rights Patent Filing Procedure 09/06/2020 K.L.E. Institute of Technology, Hubballi National
76 Symposium Participant Improving the Skill Set and Changing the Attitude 05/06/2020 ICT ACADEMY National
77 Seminar Participant Gender Sensitization: Need of the hour 26/05/2020 Dr. Bhimrao Ambedkar University, Agra National
78 Seminar Participant Could Virtual Education System Become New Normal 24/05/2020 IEEE Bangalore Section Regional
79 Seminar Participant Learning Machine Learning Preparing to contribute to the next industrial revolution 16/05/2020 IEEE RITB National
80 Seminar Participant Season 5-The Future of Skills-Education, Employment and Entrepreneurship 11/05/2020 ICT Academy National
81 Seminar Participant Season 4-The Future of Education, Employment and Entrepreneurship 04/05/2020 ICT Academy National
82 Seminar Participant Season 3- The Future is Here Now 27/04/2020 ICT Academy National
83 Symposium Participant Virtual IEEE Faculty Conclave for Non IEEE Faculty Members 25/04/2020 IEEE Bangalore Section Regional
84 Seminar Participant Season 2-Leading in a VUCA World 20/04/2020 ICT Academy National
85 Seminar Participant Season 1- Technology for Future 09/04/2020 ICT Academy National
86 Symposium Participant Innovation by Design 30/03/2020 IEEE TEMS National
87 Conference Presenter International Conference on Advanced Light-Weight Materials and Structures (ICALMS2K20) Influence of cutting fluid on improving the machinability of Inconel 718 - The Review 06/03/2020 Department of Mechanical Engineering, CMR Technical Campus, Hyderabad, Telangana, India International
88 Seminar Participant National Seminar on NAAC Assessment and Accreditation Building Instituitional Competencies 05/03/2020 Christ University National
89 Seminar Participant Two Day National Level Seminar on Additive and Advanced Manufacturing 29/07/2019 Bangalore Institute of Technology, Bengaluru National
90 Conference Presenter International Conference on Advances in Materials Research (ICAMR 2019) Influence of cryogenic treatment of cutting tool inserts on tool wear and surface roughness during milling of Inconel 718 25/07/2019 Ramaiah University of Applied Sciences, Bengaluru International
91 Conference Co-presenter 3rd International conference on recent research emerging trends in materials and mechanical engineering (ICRRETMME 2019) 12/07/2019 Reva University, Bangalore International
92 Conference Co-presenter 3rd International conference on recent research emerging trends in materials and mechanical engineering (ICRRETMME 2019) 12/07/2019 Reva University, Bangalore International
93 Conference Co-presenter International Conference on Advancements in Mechanical Engineering (ICAME 2019) 10/04/2019 Jyothi Engineering College International
94 Conference Presenter International Conference on Design, Materials, Cryogenics and Constructions An experimental analysis of machinability characteristics for investigating the machinability of Inconel 718 using ceramic inserts 28/03/2019 Vel Tech Rangarajan Dr Sagunthala R&D Institute of Science and Technology International
95 Conference Co-presenter International Conference on Recent trends in advanced material processing 20/03/2019 Chennai Institute of Technology, Chennai International
96 Conference Co-presenter International Conference on Advanced Ceramics and Nanomaterials for Sustainable Development (ACeND 2018) An Experimental Investigation of Cutting Parameters for Determining the Machinability of Inconel 718 using Cryogenic Treated Ceramic Inserts 19/09/2018 Christ University International
97 Conference Co-presenter International Conference on Advanced Ceramics and Nanomaterials for Sustainable Development (ACeND 2018) Optimization of Machining Parameters for Improving the Machinability of Inconel 718 using Ceramic Cutting Tool 19/09/2018 Christ University International
98 Conference Co-presenter International Conference on Advanced Ceramics and Nanomaterials for sustainable development 19/09/2018 Indian Ceramic Society Karnataka Chapter and CHRIST (Deemed to be University) International
99 Conference Presenter International Conference on Robotics and Smart Manufacturing (ROSMA 2018) An approach to parametric study of machining parameters in determining the machinability of Inconel 718 with optimization technique 19/07/2018 IIITDM Kancheepuram, Chennai, India International
100 Conference Co-presenter 3rd International Conference in Design, Analysis, Manufacturing and Simulation (ICDAMS 2018) Selection of Cutting Parameters for the Machinability of Inconel 718 using Grey Relational Analysis 06/04/2018 Department of Mechanical and Automobile Engineering, Saveetha School of Engineering, Chennai Institutional
101 Conference Presenter 3rd International Conference on Design, Analysis, Manufacturing and Simulation Selection of cutting parameters for the machinability of Inconel 718 using Grey Relational Analysis 06/04/2018 Saveetha Institute of Medical and Technical Sciences, Tamil Nadu, India International
102 Conference Co-presenter 3rd International Conference on Advanced Manufacturing and Automation 05/04/2018 Kalasalingam Academy of Research and Education (Deemed to be University) International
103 Conference Co-presenter National Conference on Mechanical Engineering and Emerging Technologies 23/02/2018 Christ University National
104 Conference Co-presenter National Conference on Mechanical Engineering and Emerging Technologies 23/02/2018 Christ University National
105 Conference Presenter Second International Conference on Mechanical and Manufacturing Engineering A Review on parametric study of hard machining of Inconel 718 using coated carbide tool 06/04/2017 SCSVMV University International
106 Seminar Participant Webinar on High Quality Surface Design using Catia V5 08/02/2017 EDS Technologies Pvt Ltd National
107 Participant Webinar on Casting Simulation and Defect Prediction using Z-CAST PRO 23/01/2017 DHIO Research & Engineering Pvt. Ltd National
108 Conference Presenter Experimental Investigation on the drilling Parameters affected by nanofluid using minimum quantity lubrication - International
Sl.No. Title of the Program Name of the Program Date Name of the Institution
Sl.No. Title Genre Producer Copyrights
1 Square Fitting Workshop Practice Lab Video Manual Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
2 V-Fitting Workshop Practice Lab Video Manual Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
3 Dovetail Fitting Workshop Practice Lab Video Manual Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
4 Sheet Metal Work Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
5 Welding-Butt Joint Workshop Practice Lab Video Manual Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
6 Welding-Lap Joint Workshop Practice Lab Video Manual Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
7 Welding-T Joint Workshop Practice Lab Video Manual Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
8 Introduction to Renewable and Non-renewable Energy Sources Basics of Mechanical Engineering and Nanoscience Chapter-1 CHRIST (Deemed to be University) CHRIST (Deemed to be University)
9 Types of Renewable Energy Basics of Mechanical Engineering and Nanoscience Chapter-1 CHRIST (Deemed to be University) CHRIST (Deemed to be University)
10 Types of Non-Renewable Energy Basics of Mechanical Engineering and Nanoscience Chapter-1 CHRIST (Deemed to be University) CHRIST (Deemed to be University)
Sl.No. Title Guide Name Institution Month Year
Sl.No. Title Name of Student Institution Month Year
Sl.No. Title of Invention Inventor(s) Filing Date
1 Fully automatic commercial line vehicle assembly line system PALPANDIAN P,IVAN SUNIT ROUT,DR. M. SRINIVASNAIK, DR. M.SIVAKUMAR,DR. R.RAMESH KUMAR, DR. ARVIND BODHE,DR. BODA SURYA VENKATA RAMARAO, DR. P.KANAKARAJAN 09-Feb-2022

Additional information

Title of Invention Fully automatic commercial line vehicle assembly line system
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) PALPANDIAN P,IVAN SUNIT ROUT,DR. M. SRINIVASNAIK, DR. M.SIVAKUMAR,DR. R.RAMESH KUMAR, DR. ARVIND BODHE,DR. BODA SURYA VENKATA RAMARAO, DR. P.KANAKARAJAN
Type of Specification Provisional
Type of Patent
Granted/Awarded Date
Publication/Application Date 09-Feb-2022
Application/Filing Date 09-Feb-2022
IPC Number
Publication Number 202241007000 A
Patent Number 202241007000 A
Field of Invention Manufacturing - Assembly line
2 DEVELOPMENT OF MULTI-SENSOR SMART ROBOT FOR INTELLIGENT BORDER SECURITY SURVEILLANCE SYSTEM PALPANDIAN P,IVAN SUNIT ROUT,DR YARRAPRAGADA K S S RAO, MR RONALD CHIWARIRO,DR. NITHIN H S, DR. B SOMASUNDARAM,MR.RAMASHIS BANERJEE, DR. MOHAMMED IMRAN,DR.BUDDESAB, DR. RAVI KUMAR KANDAGATLA,MR. RAJESH A S, )MR. MAHESH KUMAR A S 27-Jul-2021

Additional information

Title of Invention DEVELOPMENT OF MULTI-SENSOR SMART ROBOT FOR INTELLIGENT BORDER SECURITY SURVEILLANCE SYSTEM
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) PALPANDIAN P,IVAN SUNIT ROUT,DR YARRAPRAGADA K S S RAO, MR RONALD CHIWARIRO,DR. NITHIN H S, DR. B SOMASUNDARAM,MR.RAMASHIS BANERJEE, DR. MOHAMMED IMRAN,DR.BUDDESAB, DR. RAVI KUMAR KANDAGATLA,MR. RAJESH A S, )MR. MAHESH KUMAR A S
Type of Specification Provisional
Type of Patent
Granted/Awarded Date
Publication/Application Date 27-Jul-2021
Application/Filing Date 27-Jul-2021
IPC Number
Publication Number 202141033795
Patent Number 202141033795
Field of Invention Robotics
Sl.No. Name of the Research Project Investigator(s) Sponsors Internal/External
Sl.No. Name of the Conference/Seminar Name of Organiser Level Date
Sl.No. Name of the Workshop/FDP/Training programme Name of Oraganiser Level Role Date
1 Five Days Online FDP on Academic Writing St Joseph Engineering College, Mangaluru-575028 National Participant 04/04/2022
2 Accreditation and Strategic Building Department of Mechanical and Automobile Engineering,CHRIST (Deemed to be University) Institutional Participant 24/03/2022
3 Applications of Artificial Intelligence and Machine Learning in Mechanical Engineering SRM Institute of Science and Technology, Vadapalani Campus, Chennai National Participant 04/10/2021
4 Electric Vehicle Technology IEEE Mysore Subsection and IEEE Standards Association National Participant 30/08/2021
5 Introduction to AUTOSAR and Vehicle Network Toolbox E-Mobility R & D Centre, School of Engineering & Technology, CHRIST (Deemed to be University), Math Works & CoreEL Technologies Regional Participant 19/08/2021
6 Equilibrium Thinking for Startups and Established Organizations VelTech Rangarajan Dr Sagunthala R&D Institute of Science and Technology, Chennai National Participant 04/08/2021
7 The Art of Doing Research Jyothi Engineering College, Thrissur, India, CHRIST (Deemed to be University), Bangalore, India and Pelita Bangsa University, Indonesia in association with Internal Quality Assurance Cell (IQAC) International Participant 12/07/2021
8 Faculty Development Programme I- 2021 CHRIST (Deemed to be University) Institutional Participant 16/06/2021
9 Digital Teaching Techniques ICT Academy, India National Participant 07/06/2021
10 Role of Holistic Education in Building an Equitable, Safer and Happier Society Madhav Institute of Technology and Science, Gwalior National Participant 05/06/2021
11 Hybrid Teaching Staff Development College Participant 02/03/2021
12 Artificial Intelligence & Machine Learning (Beginner) Dept. of Computer Science and Engineering, School of Engineering and Technology, CHRIST (Deemed to be University) Institutional Participant 02/10/2020
13 Module 2: Professional Ethics and Sustainability All India Council for Technical Education (AICTE) National Participant 10/09/2020
14 Module 1: Orientation Towards Technical Education and Curriculum Aspects All India Council for Technical Education (AICTE) National Participant 10/09/2020
15 Advancements and Futuristic Trends in Materials and Mechanical Engineering Bangalore Institute of Technology National Participant 27/07/2020
16 Advanced Materials (Fabrication, Characterization and Applications) Kalinga Institute of Industrial Technology (KIIT), Bhubaneswar, Odisha National Participant 20/07/2020
17 Pioneering AI Technology-A Case Study Approach Dayananda Sagar University, Bengaluru National Participant 22/06/2020
18 Making the Case for Robotic Process Automation Coursera International Participant 11/06/2020
19 Robotica Coursera International Participant 20/05/2020
20 IEEE Reference Management tool for research articles and thesis writing IEEE SIGHT Regional Participant 20/05/2020
21 Learning, Pedagogy and Effective Use of Case Methodology ASM Group of Institutes National Participant 17/05/2020
22 CAM using Fusion 360 (Online Live FDP) ICT Academy National Participant 07/05/2020
23 Intelligent Machining Coursera International Participant 02/05/2020
24 Introduction to CAD, CAM and Practical CNC Machining Coursera International Participant 02/05/2020
25 Effective Online Engineering Education: Tips and Tricks IEEE TEMS BANGALORE Regional Participant 26/04/2020
26 Online Teaching CHRIST (Deemed to be University), Bangalore Participant 22/04/2020
27 Writing a Competitive Grant Research Proposal IEEE SIGHT National Participant 20/04/2020
28 Learning To Teach Online Coursera International Participant 04/04/2020
29 Intro to Digital Manufacturing with Autodesk Fusion 360 Coursera International Participant 01/04/2020
30 NPTEL-Computer Integrated Manufacturing Indian Institute of Technology Kanpur National Participant 05/02/2020
31 Workshop on Research and modern tools usage Department of Mechanical and Automobile Engineering, Faculty of Engineering, CHRIST (Deemed to be University) Institutional Organiser & Participant 30/05/2019
32 Teaching pedagogy and evaluation process in outcome based education Department of Mechanical and Automobile Engineering, Christ University Faculty of Engineering Participant 20/05/2019
33 English Proficiency Centre for Academic and Professional Support, CHRIST (Deemed to be University) Institutional Participant 15/03/2019
34 E Learning Module on The Art of Note Taking Centre for Academic and Professional Support (CAPS) Institutional Participant 12/03/2019
35 Short Course on Applied Rheology Anton Paar India Regional Participant 06/02/2019
36 Workshop on Research Methodology and IEEE Authorship Lab Department of Computer Science (PG), Kristu Jayanti College in association with IEEE ComSoc, Bangalore Regional Participant 01/02/2019
37 Workshop on Outcome Based Education (OBE) Faculty of Engineering, CHRIST (Deemed to be University) Institutional Participant 03/12/2018
38 Forging an academic community to revitalize the strategic plan and Holistic Education CHRIST (Deemed to be University), Bangalore Institutional Participant 23/11/2018
39 E-Learning Module on Resume Writing Centre for Academic and Professional Support (CAPS) Institutional Participant 19/11/2018
40 E Learning Module on Basic Research Skills Centre for Academic and Professional Support (CAPS) Institutional Participant 10/09/2018
41 Faculty Improvement Program on Intellectual Property Rights Department of Mechanical and Automobile Engineering, Faculty of Engineering, CHRIST (Deemed to be University) Institutional Organiser & Participant 06/08/2018
42 Author workshop on How to write and Publish Scientific articles and manuscripts Springer Nature and CHRIST (Deemed to be University) Institutional Participant 12/06/2018
43 Frontier areas in the subject and curriculum updation Faculty of Engineering, Mechanical Engineering department Participant 21/05/2018
44 Fifty Years of Growth and Future: Sustaining our University culture, strategic vision and Leadership Centre for Education Beyond Curriculum, Christ (Deemed to be University) Institutional Participant 14/05/2018
45 Modular training workshop on MANOVA & ANOVA Centre for Advanced Research and Training Institutional Participant 29/01/2018
46 Teaching, Learning and Evaluation Department of Mechanical and Automobile Engineering, Christ University Faculty of Engineering Participant 24/05/2017
47 Creating Standards for Research, Collaborative Projects and Consultancy Centre for Education Beyond Curriculum, Christ University Institutional Participant 15/05/2017
48 Intellectual Property Rights (IPR) Centre for Education Beyond Curriculum, Christ University Regional Participant 27/03/2017
49 Research Issues and Challenges on Sustainable Supply Chain Management Department of Manufacturing, School of Mechanical Engineering, VIT University, Vellore National Participant 04/03/2017
50 Data Analysis using SPSS Centre for Advanced Research & Training, Christ University, Bengaluru National - 24/10/2016
51 Research-Trends, Tools and Processes Christ University Faculty of Engineering, Mechanical Engineering Department - 24/09/2016
52 3D Printer and Kuka Robotics Christ University Faculty of Engineering, Mechanical Engineering Department Institutional - 04/08/2016
53 Quality Sustenance and Enhancement through Innovation Internal Quality Assurance Cell, Christ University, Bengaluru Institutional - 27/05/2016
54 Research Enablers and its Thrust Area Christ University Faculty of Engineering, Mechanical Engineering Department Institutional - 23/05/2016
Sl.No. Name of the Awards/Achievements/Others Description Organisation Month/ Year
1 Gold Medalist Master of Technology in Mechanical Engineering (Production Engineering) Samhigginbottom Institute of Agriculture, Technology and Sciences-Deemed to be University 03 August 2012
2 NPTEL Online certification Computer Numerical Control Of Machine Tools and Processes Indian Institute of Technology Kharagpur 31 March 2018
3 Senior Member, Indian Society of Mechanical Engineers Certificate of Professional Membership Qualification of Indian Society of Mechanical Engineers Indian Society of Mechanical Engineers (ISME) 26 February 2019
4 Best Paper Award at International Conference on Design, Materials, Cryogenics and Constructions (ICDMC 2019), Chennai Best Paper Award for presentation titled Än experimental analysis of machinability charactersitics for investigating the machinability of Inconel 718 in International Conference on Design, Materials, Cryogenics and Constructions (ICDMC 2019) Vel Tech Rangarajan Dr Sagunthala R&D Institute of Science and Technology, Chennai, India 29 March 2019
5 Best Poster at International Conference on Advanced Ceramics and Nanomaterials for Sustainable Development (ACeND 2018),Bangalore Best Poster titled Ëxperimental study of response parameters for improving the machinability of Inconel 718 using ceramic inserts" at International Conference on Advanced Ceramics and Nanomaterials for Sustainable Development (ACeND 2018) Faculty of Engineering, CHRIST (Deemed to be University) and Indian Ceramic Society Karnataka Chapter 21 September 2018
6 NPTEL Online Certification on Introduction to Machining and Machining Fluids Introduction to Machining and Machining Fluids Indian Institute of Technology Guwahati 13 May 2019
7 Online Quiz in English Grammar Online Quiz in English Grammar CHRIST (Deemed to be University) in association with English Language Teachers Association of India (ELTAI) 15 June 2020
8 Best Oral Presentation Award at 3rd International e-Conference on Frontiers in Mechanical Engineering and nano Technology [ICFMET-2020] Best Oral Presentation Award for presentation titled Variable parametric test to improve the machinability of Inconel 718 using Tungsten Carbide tool in 3rd International e-Conference on Frontiers in Mechanical Engineering and nano Technology (ICFMET 2020) Sanjeevan Engineering & Technology Institute, Panhala and Yashawantrao Patil Science College, Solankur 28 November 2020
9 Quiz in National Road Safety Month Awareness Programme National Road Safety Month Awareness Programme The Automotive Research Association of India 03 February 2021
10 Day 2- Quiz in National Road Safety Month Awareness Programme National Road Safety Month Awareness Programme The Automotive Research Association of India 12 February 2021
11 Elsevier Reviewer Recognition Review Contribution to the Journal Materials Today Proceedings, Elsevier Elsevier Ltd 03 January 2022
12 Reviewer Recognition by Journal of Advances in Materials and Processing Technology, Taylor and Francis Review Contribution to the Journal of Advances in Materials and Processing Technology, Taylor and Francis Taylor and Francis Group 12 March 2022
13 Certificate of Honour for Best Research Paper Award Best Research Paper Award from International Conference on Design, Materials, Cryogenics and Constructions during the year 2019 by CHRIST (Deemed to be University), Bangalore CHRIST (Deemed to be University) 25 February 2022
14 Certificate of Honour for Reviewer of Lunday (Research Journal) Reviewer of Lunday (Research Journal) from Bulcan State University during the year 2019 by CHRIST (Deemed to be University), Bangalore. CHRIST (Deemed to be University) 25 February 2022
15 Best Paper Award at International Conference on Contemporary Innovations in Mechanical Engineering (CIME-2022) Best Paper Award for presentation titled An investigation to the hardness of the cutting tool during machining Inconel 718 due to the cryogenic effect in International Conference on Contemporary Innovations in Mechanical Engineering (CIME-2022) RGM College of Engineering and Technology 23 April 2022
Sl.No. Faculties Theme of Consultancy Type
Sl.No. Applicants Title Date Published
1 PALPANDIAN P,IVAN SUNIT ROUT,DR. MUTHUKUMAR SUBRAMANIAN,RAMASHIS BANERJEE A robotic assembly with AI & ML interfaces for better path obstruction handling. 28/09/2021

CHRIST

(Deemed to be University)

Dharmaram College Post, Hosur Road, Bengaluru - 560029,
Karnataka, India

Tel: +91 804012 9100 / 9600

Fax: 40129000

Email: mail@christuniversity.in

Web: http://www. christuniversity.in

Vision

EXCELLENCE AND SERVICE

Mission

CHRIST (Deemed to be University) is a nurturing ground for an individual's holistic development to make effective contribution to the society in a dynamic environment.

Copyright © CHRIST (Deemed to be University) 2020
Website Developed by Cloud Business Pages from INI Technologies Pvt Ltd., Kochi, India