Faculty

Profile

Dr IVAN SUNIT ROUT

BTech, MTech, PhD
ASSOCIATE PROFESSOR

SCHOOL OF ENGINEERING AND TECHNOLOGY
BANGALORE CAMPUS
 Print Profile

Sl.No. Title Name of Periodical Periodicity Date
1 Education boon through online media-cut across pandemic State Herald-An alternative Media Daily 06/02/2021
2 Disturbing policies of the education system-the hidden agenda of Right Wing Brigade State Herald-An alternative Media Daily 18/02/2019
Sl.No. Title Name of Journal Date of Publication Volume No/Issue No/Page No
1 An investigation to the hardness of the cutting tool during machining inconel 718 due to the cryogenic effect AIP Conference Proceedings 25-Jan-2024 2821 / 1 / 1-5

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,ANIL RAJ,ANIL MELWYN REGO,SAJNA PARIMITA PANIGRAHI
Title of Article An investigation to the hardness of the cutting tool during machining inconel 718 due to the cryogenic effect
Name of Journal AIP Conference Proceedings
Volume No 2821
Issue No 1
Page No 1-5
URL https://www.scopus.com/authid/detail.uri?authorId=57202790450
Indexing Agency Scopus
Date of Publication 25-Jan-2024
2 Parametric analysis of control parameters for investigating the machinability of Inconel 718 using ceramic inserts of round type AIP Conference Proceedings 28-Nov-2023 2548 / 1 / 1-11

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,ANIL RAJ,ANIL MELWYN REGO
Title of Article Parametric analysis of control parameters for investigating the machinability of Inconel 718 using ceramic inserts of round type
Name of Journal AIP Conference Proceedings
Volume No 2548
Issue No 1
Page No 1-11
URL https://www.scopus.com/authid/detail.uri?authorId=57202790450
Indexing Agency Scopus
Date of Publication 28-Nov-2023
3 Prediction of Friction Stir Welding Parameters Using Response Surface Methodology AIP Conference Proceedings 22-Sep-2023 / / 040027-1-040027-7

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,ANIL RAJ,IVAN SUNIT ROUT,HADIYA PRITESH DULABHAI
Title of Article Prediction of Friction Stir Welding Parameters Using Response Surface Methodology
Name of Journal AIP Conference Proceedings
Volume No
Issue No
Page No 040027-1-040027-7
URL https://pubs.aip.org/aip/acp
Indexing Agency Scopus
Date of Publication 22-Sep-2023
4 Experimental analysis and RSM-based optimization of friction stir welding joints made of the alloys AA6101 and C11000 Materials Research Express 12-Jun-2023 10 / 5 / -

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) ANIL RAJ,ARUL KULANDAIVEL,LAKSHMANA KUMAR,V MOHANAVEL, M RAVICHANDRAN,IVAN SUNIT ROUT,S PRASATH
Title of Article Experimental analysis and RSM-based optimization of friction stir welding joints made of the alloys AA6101 and C11000
Name of Journal Materials Research Express
Volume No 10
Issue No 5
Page No -
URL https://iopscience.iop.org/journal/2053-1591
Indexing Agency Scopus
Date of Publication 12-Jun-2023
5 Modelling, Temperature Analysis, and Mechanical Properties of Friction Stir Welding of Al-Cu Joints with Hardened OHNS Steel Tools Journal of Mines, Metals and Fuels 21-Dec-2022 70 / 8(A) / 462-470

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) ANIL RAJ,RAMESHA K,IVAN SUNIT ROUT
Title of Article Modelling, Temperature Analysis, and Mechanical Properties of Friction Stir Welding of Al-Cu Joints with Hardened OHNS Steel Tools
Name of Journal Journal of Mines, Metals and Fuels
Volume No 70
Issue No 8(A)
Page No 462-470
URL http://www.jmmf.info/
Indexing Agency Scopus
Date of Publication 21-Dec-2022
6 Design and Optimization of Friction Stir Welding of Al-Cu BUTT Joint Configuration using Taguchi Method Journal of Mines, Metals and Fuels 21-Dec-2022 70 / 8(A) / 471-479

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) ANIL RAJ,RAMESHA K,IVAN SUNIT ROUT
Title of Article Design and Optimization of Friction Stir Welding of Al-Cu BUTT Joint Configuration using Taguchi Method
Name of Journal Journal of Mines, Metals and Fuels
Volume No 70
Issue No 8(A)
Page No 471-479
URL http://www.jmmf.info/
Indexing Agency Scopus
Date of Publication 21-Dec-2022
7 Parametric investigation of machining parameters in determining the machinability of Inconel 718 using taguchi technique and grey relational analysis Materials Today Proceedings 08-Sep-2022 66 / Part-4 / 2085-2092

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,ANIL RAJ,ANIL MELWYN REGO
Title of Article Parametric investigation of machining parameters in determining the machinability of Inconel 718 using taguchi technique and grey relational analysis
Name of Journal Materials Today Proceedings
Volume No 66
Issue No Part-4
Page No 2085-2092
URL https://www.sciencedirect.com/journal/materials-today-proceedings
Indexing Agency Scopus
Date of Publication 08-Sep-2022
8 Parametric effect of minimum quantity lubrication unit using RSM technique to improve the machinability of Inconel 718 Materials Today: Proceedings 06-Jun-2022 66 / 4 / 2085-2092

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) PALPANDIAN P,IVAN SUNIT ROUT,ANIL RAJ,ANIL MELWYN REGO
Title of Article Parametric effect of minimum quantity lubrication unit using RSM technique to improve the machinability of Inconel 718
Name of Journal Materials Today: Proceedings
Volume No 66
Issue No 4
Page No 2085-2092
URL https://www.sciencedirect.com/science/article/abs/pii/S2214785322038329?via%3Dihub
Indexing Agency Scopus
Date of Publication 06-Jun-2022
9 The effect of cutting fluid in improving the machinability of Inconel 718 using ceramic AS20 tool Materials Today Proceedings 19-Jun-2021 49 / Part 5 / 1169-1174

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,ANIL RAJ,ANIL MELWYN REGO
Title of Article The effect of cutting fluid in improving the machinability of Inconel 718 using ceramic AS20 tool
Name of Journal Materials Today Proceedings
Volume No 49
Issue No Part 5
Page No 1169-1174
URL https://www.scopus.com/authid/detail.uri?authorId=57202790450
Indexing Agency Scopus
Date of Publication 19-Jun-2021
10 Experimental study of response parameters during machining of Inconel 718 with cryogenically treated ceramic round tool using cutting fluid Materials Today Proceedings 17-May-2021 47 / Part 14 / 4281-4287

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,ANIL RAJ
Title of Article Experimental study of response parameters during machining of Inconel 718 with cryogenically treated ceramic round tool using cutting fluid
Name of Journal Materials Today Proceedings
Volume No 47
Issue No Part 14
Page No 4281-4287
URL https://www.sciencedirect.com/journal/materials-today-proceedings
Indexing Agency Scopus
Date of Publication 17-May-2021
11 Optimization of friction stir welding parameters during joining of AA3103 and AA7075 aluminium alloys using Taguchi method Materials Today Proceedings 01-May-2021 / / -7

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,ANIL RAJ,PRATAP KUMAR,ANIL MELWYN REGO
Title of Article Optimization of friction stir welding parameters during joining of AA3103 and AA7075 aluminium alloys using Taguchi method
Name of Journal Materials Today Proceedings
Volume No
Issue No
Page No -7
URL https://authors.elsevier.com/a/1ck3E_oMxzEpJL
Indexing Agency Scopus
Date of Publication 01-May-2021
12 Variable parametric test to improve the machinability of Inconel-718 using Tungsten Carbide tool Materials Today Proceedings 12-Mar-2021 47 / / 5564 -5569

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,ANIL RAJ
Title of Article Variable parametric test to improve the machinability of Inconel-718 using Tungsten Carbide tool
Name of Journal Materials Today Proceedings
Volume No 47
Issue No
Page No 5564 -5569
URL https://authors.elsevier.com/tracking/article/details.do?aid=24240&jid=MATPR&surname=ROUT
Indexing Agency Scopus
Date of Publication 12-Mar-2021
13 Influence of cryogenic treatment of cutting tool inserts on tool wear and surface roughness during milling of Inconel 718 AIP Conference Proceedings 05-Oct-2020 2274 / 03004 / 1-5

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,MANISH MATHEW,KEVIN LOBO IVAN,SHOMYAJIT MISRA
Title of Article Influence of cryogenic treatment of cutting tool inserts on tool wear and surface roughness during milling of Inconel 718
Name of Journal AIP Conference Proceedings
Volume No 2274
Issue No 03004
Page No 1-5
URL https://www.scopus.com/authid/detail.uri?authorId=57202790450
Indexing Agency Scopus
Date of Publication 05-Oct-2020
14 Parametric Analysis Of Response Variables For Improving The Machining Characteristics Of Inconel 718 Using Ceramic Inserts International Journal of Mechanical and Production Engineering Research and Development 03-Dec-2019 9 / Special Issue / 106-113

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,ANIL RAJ,SHOMYAJIT MISRA, FINAL YEAR STUDENT BATCH2016-2020,VISHAL PATIL, FINAL YEAR STUDENT BATCH 2016-2020
Title of Article Parametric Analysis Of Response Variables For Improving The Machining Characteristics Of Inconel 718 Using Ceramic Inserts
Name of Journal International Journal of Mechanical and Production Engineering Research and Development
Volume No 9
Issue No Special Issue
Page No 106-113
URL http://www.tjprc.org/conference-archives.php?year=&cid=&tid=&jname=67_2&e_type=Special%20Issue&page=31
Indexing Agency Scopus
Date of Publication 03-Dec-2019
15 Analysis of Machining Parameters for Face Milling of Inconel 718 using Response Surface Methodology International Journal of Recent Technology and Engineering 31-May-2019 8 / 1S2 / 75-78

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P,SACHIN KATTOOKAREN,SANATH VIMAL M
Title of Article Analysis of Machining Parameters for Face Milling of Inconel 718 using Response Surface Methodology
Name of Journal International Journal of Recent Technology and Engineering
Volume No 8
Issue No 1S2
Page No 75-78
URL https://www.ijrte.org/download/volume-8-issue-1s2/
Indexing Agency Scopus
Date of Publication 31-May-2019
16 Parametric investigation of machining parameters in determining the machinability of Inconel 718 using taguchi technique and grey relational analysis Procedia Computer Science 20-Jul-2018 133 / / 786-792

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P
Title of Article Parametric investigation of machining parameters in determining the machinability of Inconel 718 using taguchi technique and grey relational analysis
Name of Journal Procedia Computer Science
Volume No 133
Issue No
Page No 786-792
URL https://www.sciencedirect.com/journal/procedia-computer-science
Indexing Agency Scopus
Date of Publication 20-Jul-2018
17 Selection of cutting parameters for the machinability of Inconel 718 using Grey Relational Analysis Matec Web of Conferences 12-Jun-2018 172 / / 1-5

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) IVAN SUNIT ROUT,PALPANDIAN P
Title of Article Selection of cutting parameters for the machinability of Inconel 718 using Grey Relational Analysis
Name of Journal Matec Web of Conferences
Volume No 172
Issue No
Page No 1-5
URL https://www.matec-conferences.org/articles/matecconf/abs/2018/31/matecconf_icdams2018_04004/matecconf_icdams2018_04004.html
Indexing Agency Web of Science and Scopus
Date of Publication 12-Jun-2018
Sl.No. Title URL Subject Month Year
1 Online Education a vaccine to students and tutors during COVID 19 pandemic https://ivansunitrout.wordpress.com/2021/02/04/online-education-a-vaccine-to-students-and-tutors-during-covid-19-pandemic/ Online Education
2 Challenges of Engineering Education in India https://54319.home.blog/2020/02/24/challenges-of-engineering-education-in-india/ Engineering Education
Sl.No. Type of Book Title Title of Book ISBN Month Year
Sl.No. Type of Book Title of Chapter/Article ISBN Month Year
1 Conference Proceedings Optimization of Friction Stir Welding Parameters for the Optimum Hardness of Al?Cu Butt Joints Using the Taguchi Method 978-981973653-9 Jul 2024

Additional information

Type of Book Conference Proceedings
Type of Work Chapter
Sole Authored/Co Authored Co-Authored
Author Name (s) ANIL RAJ,IVAN SUNIT ROUT,RAVICHANDRAN G,DARSHAN S M,NIRANJANA S J,STEPHAN K. VINOD,C V CHANDRASHEKARA,N RAJESH MATHIVANAN,K HARIHARAN
Title of Book Lecture Notes in Mechanical Engineering
Title of Book/Chapter/Article/Case Study) Optimization of Friction Stir Welding Parameters for the Optimum Hardness of Al?Cu Butt Joints Using the Taguchi Method
Month/Year Jul/2024
ISBN 978-981973653-9
Pages 63 - 70
Publishing Company/Institution Springer Science and Business Media Deutschland Gm
Indexing Agency Scopus
Level International publisher
2 Conference Proceedings Prediction of Friction Stir Welding Parameters Using Response Surface Methodology 10.1063/5.0165890 Oct 2023

Additional information

Type of Book Conference Proceedings
Type of Work Article
Sole Authored/Co Authored Co-Authored
Author Name (s) ANIL RAJ,IVAN SUNIT ROUT,HADIYA PRITESH DULABHAI,SHINTO THOMAS,ANAND RAJ,RATHISH MENON,REMYA Y K
Title of Book Proceedings Of International Conference On Innovations In Civil Engineering-Icice 2022
Title of Book/Chapter/Article/Case Study) Prediction of Friction Stir Welding Parameters Using Response Surface Methodology
Month/Year Oct/2023
ISBN 10.1063/5.0165890
Pages
Publishing Company/Institution AIP publishing
Indexing Agency Scopus
Level International publisher
Sl.No. Type of Book Title Title of Case Study ISBN Month Year
Sl.No. Title Abstract Objectives Type Sponsors
Sl.No. Title Place of Publication ISBN No. Month Year
Sl.No. Type of Program Role Name of Program Title of Paper Date Organising Institution Level
1 Seminar Participant Strategies for Energy Efficiency, Sustainable Practices, and Climate Resilience in Kannada Language 07/08/2024 Christ University National
2 Symposium Participant Novel and Emerging Approaches in Additive Manufacturing Ecosystem and Exploring the opportunities for External Funding 26/07/2024 Christ University National
3 Seminar Participant Generative AI-powered research assistant (Beta) 23/07/2024 Clarivate Pvt Ltd National
4 Seminar Participant Introduction to Journal Citation Reports 2024 16/07/2024 Clarivate Pvt Ltd National
5 Seminar Participant Funding alert- Wildfire research funds are in increasing demand 09/07/2024 Clarivate Pvt Ltd National
6 Seminar Participant Exploring the Importance of Older Literature in Research 10/06/2024 Clarivate Pvt Ltd National
7 Seminar Participant Ideate and create solutions that will shape the future of mobility 15/03/2024 ARAI and TechNovuus Pvt Ltd National
8 Seminar Participant AI Enhancements Transform Learning Experience 14/03/2024 Cesim Pvt Ltd National
9 Seminar Participant Leveraging Patent Information for Impacting Your Research and Innovation Breakthroughs 14/03/2024 Cisco Pvt Ltd National
10 Seminar Participant Emerging Sources Citation Index 13/03/2024 Clarivate Pvt Ltd National
11 Seminar Participant Get in-depth insights about teaching with Marketplace Simulations:Conscious Capitalism 06/03/2024 Harvard Business Publishing Ltd International
12 Conference Participant International Conference on AI Applications in Engineering and Technology (AIAET-2024) 06/03/2024 Christ University International
13 Seminar Participant Cases as graphic novels 29/02/2024 Harvard Business Publishing Ltd International
14 Seminar Participant Unleashing Innovation in Curriculum Design with Outcome-Based Education 29/02/2024 Inpods Ed-tech Ltd National
15 Seminar Participant Discover the Power of Anton Paar Refractometers and Polarimeters in Academic Research 29/02/2024 Anton Paar Pvt Ltd National
16 Seminar Participant Enhancing Marketing Education with Simulation Tools and AI Feedback 23/02/2024 Cesim Pvt Ltd National
17 Seminar Participant Drugs to Watch and Key Trends in 2024 21/02/2024 Clarivate Pvt Ltd National
18 Seminar Participant Explore the Power of Synthesis Reactors for Your Laboratory 19/02/2024 Anton Paar Pvt Ltd National
19 Seminar Participant From Pixels to Robots: Recipes For Vision-Enabled Robot Learning 16/02/2024 Christ University Institutional
20 Seminar Participant Execute more comprehensive literature reviews with New PQDT Citation Index & Web of Science 12/01/2024 Clarivate Pvt Ltd National
21 Seminar Participant Promoting Diversity in Engineering: Breaking Gender Stereotypes 10/01/2024 Christ University Institutional
22 Seminar Participant How to create and distribute a coursepack with ease 27/12/2023 Harvard Business Publishing Ltd International
23 Seminar Participant Pledge for a better and greener tomorrow by taking a deep dive into Sustainability Management Simulation: Net Zero 13/12/2023 Harvard Business Publishing Ltd International
24 Seminar Participant Teaching effectively using Case Studies - Conversation on Fundamentals of Case Teaching and Case Companion 05/12/2023 Harvard Business Publishing Ltd International
25 Seminar Participant Predict range and power delivery over battery's lifetime 01/12/2023 ARAI and TechNovuus Pvt Ltd National
26 Seminar Participant Understand and Mitigate Battery Thermal Runaway using Oorja 24/11/2023 ARAI and TechNovuus Pvt Ltd National
27 Seminar Participant Going Beyond JIF 23/11/2023 Clarivate Pvt Ltd International
28 Seminar Participant Benchmarking- An Engineered Approach 22/11/2023 ARAI and TechNovuus Pvt Ltd National
29 Seminar Participant Characterize the Specific Surface Area and Pore Size using our new Nova 20/11/2023 Anton Paar India Pvt Ltd National
30 Seminar Participant Your Guide for Using Simulations to Teach Undergraduates 09/11/2023 Harvard Business Publishing Ltd International
31 Seminar Participant Overview of Electric Vehicle Development 20/10/2023 ARAI and TechNovuus Pvt Ltd National
32 Seminar Participant Engine Emission and Control 09/10/2023 ARAI and TechNovuus Pvt Ltd National
33 Seminar Participant Creative Engineering I-Pro Course 04/09/2023 ARAI and TechNovuus Pvt Ltd National
34 Seminar Participant Global Service Learning: A conversation with Prof Jun, Seoul Women's University 26/07/2023 Christ University Institutional
35 Seminar Participant A New Online Case Teaching Course 25/07/2023 Harvard Business Publishing Ltd International
36 Seminar Participant Introduction to Journal Citation Reports 2023 25/07/2023 Clarivate Pvt Ltd International
37 Seminar Participant Smart Optimization for Solar Plants 13/07/2023 ARAI and TechNovuus Pvt Ltd National
38 Seminar Participant The Growing Impact of Older Literature 21/06/2023 Clarivate Pvt Ltd International
39 Seminar Participant Teaching with Cases 14/06/2023 Harvard Business Publishing Ltd International
40 Seminar Participant Conducting Literature Review 25/05/2023 Clarivate Pvt Ltd National
41 Seminar Participant Expand the reach of your graduate research around the globe 18/05/2023 Clarivate Pvt Ltd National
42 Seminar Participant Commercialising Your Institution's Academic Research 17/05/2023 Clarivate Pvt Ltd National
43 Seminar Participant The Digital Mindset What It Really Takes to Thrive in the Age of Data, Algorithms, and AI 10/05/2023 Harvard Business Publishing Ltd International
44 Seminar Participant Exploring SUMMON Discovery Tool-Uncovering New Paths to Knowledge and Information 03/05/2023 Clarivate Pvt Ltd National
45 Seminar Participant Unlocking the Power of AI How Tools Like ChatGPT Can Make Teaching Easier and More Effective 02/05/2023 Harvard Business Publishing Ltd International
46 Seminar Participant Enhancing Student Learning with Peer Exchange Demonstration and Q&A 01/05/2023 Harvard Business Publishing Ltd International
47 Seminar Participant Are You Favoring Your In-Person Students 30/04/2023 Harvard Business Publishing Ltd International
48 Seminar Participant EndNote 21- Accelerate Your Research and Focus on Your Ideas 29/04/2023 Clarivate Pvt Ltd National
49 Seminar Participant Derive critical business insights with Clarivate solutions 26/04/2023 Clarivate Pvt Ltd National
50 Seminar Participant Why Scaling Back May Help Your Academic Career 23/04/2023 Harvard Business Publishing Ltd International
51 Seminar Participant Using Strategy simulation in your Capstone Courses 21/04/2023 CESIM Pvt Ltd National
52 Seminar Participant Prepare your undergraduates for success before class even starts 19/04/2023 Harvard Business Publishing Ltd International
53 Seminar Participant Why Morning People Should Never Teach or Grade After 6 p.m. 16/04/2023 Harvard Business Publishing Ltd International
54 Seminar Participant Introduction to Construction Project Planning 14/04/2023 Skill Lync Pvt Ltd National
55 Seminar Participant The Necessary Journey Making Real Progress on Equity and Inclusion 11/04/2023 Harvard Business Publishing Ltd International
56 Seminar Participant Importance of Quality in Project Management 06/04/2023 Skill Lync Pvt Ltd National
57 Seminar Participant Simulation Games-Future of High Impact Education! 05/04/2023 CESIM Pvt Ltd National
58 Seminar Participant Manuscript Writing for High Impact Publishing-DOs and DON'TS 14/03/2023 Clarivate Pvt Ltd National
59 Seminar Participant Verification and Validation Testing Methodology for Li-ion battery cells 03/03/2023 TechNovuus Pvt Ltd National
60 Seminar Participant Engaging Researchers and Learners with ProQuest Ebook Resource 23/02/2023 Clarivate Pvt Ltd National
61 Seminar Participant Industrial Engineering 4.0 17/02/2023 Christ University National
62 Seminar Participant What's new in the Web of Science 14/02/2023 Clarivate Pvt Ltd National
63 Seminar Participant The impact of AI inside and outside of your undergraduate classroom 13/02/2023 Harvard Business Publishing Ltd International
64 Seminar Participant AI-Led Transformation of Engineering Is Here 12/02/2023 Skill Lync Pvt Ltd National
65 Seminar Participant Value Engineering and Design thinking for product and processes 11/02/2023 Christ University National
66 Seminar Participant Automatic Digital Polarimeter-For Optical/Specific Optical rotation-Sugar analyzer/Saccharimeter/Sucrolyser 10/02/2023 Anton Paar India Pvt Ltd National
67 Seminar Participant Navigating the Perfect Storm- How Pandemic is Forcing a Reimagination of Higher Education and Workforce Preparedness 09/02/2023 Harvard Business Publishing Ltd International
68 Seminar Participant Enhancing Research productivity in Doctoral program 04/02/2023 Christ University National
69 Seminar Participant A Complete 3D Simulation Software for Robot Integrated Manufacturing Automation, Factory Simulation and CIM/FMS Systems 03/02/2023 Indiasoft Technologies Pvt Ltd National
70 Seminar Participant Robotics Simulation Software for Laboratory and Curriculum- RoboDK, Multiple models and brands Robotcell simulation 02/02/2023 Indiasoft Technologies Pvt Ltd National
71 Seminar Participant Serialization in Java 31/01/2023 Skill Lync Pvt Ltd National
72 Seminar Participant Sustainable Entrepreneurship: 5 new cases 30/01/2023 Harvard Business Publishing Ltd International
73 Seminar Participant Benchmarking Strategy 28/01/2023 Christ University National
74 Seminar Participant Be a Part of India's Engineering success story 27/01/2023 Skill Lync Pvt Ltd National
75 Seminar Participant Witness, a Simulation Software for Industrial Engineering, Production Planning and Control (PPC), Supply Chain Management, Operation Research, Production Management, FMS Systems Simulation 25/01/2023 Indiasoft Technologies Pvt Ltd National
76 Seminar Participant Simulation of Hydraulics, Pneumatics, Mechatronics, PLC and Automation using Automation Simulation Software 24/01/2023 Indiasoft Technologies Pvt Ltd National
77 Seminar Participant Beyond the Characterization of Surface Charge - Zeta Potential Analysis in Polymer Research 24/01/2023 Anton Paar India Pvt Ltd National
78 Seminar Participant CNC Simulator- DigiCNC 2,2.5,3,4 and 5 axis CNC Control Panel and Machine Simulator 23/01/2023 Indiasoft Technologies Pvt Ltd National
79 Seminar Participant Internship-Workshop-Hackathons-Advisory 23/01/2023 Brainovision solutions India Pvt Ltd & National Youth Council of India National
80 Seminar Participant New Age Engineering Domains 22/01/2023 Skill Lync Pvt Ltd National
81 Seminar Participant Development of Academic Leadership 21/01/2023 Christ University National
82 Seminar Participant FLOWNEX for Thermodynamics, Fluid Mechanics, Heat Transfer, RAC 19/01/2023 Indiasoft Technologies Pvt Ltd National
83 Seminar Participant Conduct Robotics Laboratory Practicals and Curriculum Using RoboDK Simulation Software 18/01/2023 Indiasoft Technologies Pvt Ltd National
84 Seminar Participant Design, Modeling and Simulation of Solar Thermal, Solar PVT Hybrid systems Technologies using POLYSUN simulation software 17/01/2023 Indiasoft Technologies Pvt Ltd National
85 Seminar Participant 3 essential materials for teaching decision-making 13/01/2023 Harvard Business Publishing Ltd International
86 Seminar Participant Is it your turn to sow the seed of success 13/01/2023 Skill Lync Pvt Ltd National
87 Seminar Participant Put the finishing touches on your coursepack before the term begins 12/01/2023 Harvard Business Publishing Ltd International
88 Seminar Participant Undergraduate entrepreneurship educators frequently use simulations 10/01/2023 Harvard Business Publishing Ltd International
89 Seminar Participant Product Update- December Release (42.12) 14/12/2022 Cisco Pvt Ltd National
90 Seminar Participant Gain insights into synthesis processes and material properties with live Raman analysis 09/12/2022 Anton Paar Pvt Ltd National
91 Seminar Participant Designing course outcomes and outcomes focused questions 04/11/2022 Inpods Pvt Ltd National
92 Seminar Participant Introduction to Cybersecurity in Automotive Applications 02/11/2022 TechNovuus Pvt Ltd National
93 Seminar Participant Best Practices for hosting a seamless webex meeting 25/10/2022 Cisco Pvt Ltd National
94 Seminar Participant Engage with Slido-Tips and Tricks 20/10/2022 Cisco Pvt Ltd National
95 Seminar Participant Vertical Exclusive::Webex for Education 19/10/2022 Cisco Pvt Ltd National
96 Seminar Participant What's new with October release (42.10) 18/10/2022 Cisco Pvt Ltd National
97 Seminar Participant Sample Prepare Solutions for Heavy Metal Analysis 13/10/2022 Anton Paar India Pvt Ltd National
98 Seminar Participant Your Role in Students' Success: Support That Lasts Beyond The Classroom 13/10/2022 Harvard Business Publishing Ltd International
99 Seminar Participant Track records with precision to recruit the best research talents 12/10/2022 Clarivate Pvt Ltd National
100 Seminar Participant What's new with Slido 11/10/2022 Cisco Pvt Ltd National
101 Seminar Participant All About Webex Webinars- Best Practices 06/10/2022 Cisco Pvt Ltd National
102 Seminar Participant Integrate Webex with your Learning Management System 04/10/2022 Cisco Pvt Ltd National
103 Seminar Participant Modernizing and Optimizing the student interface 30/09/2022 Harvard Business Publishing Ltd International
104 Seminar Participant Tracking Institutional Performance through the Web of Science 28/09/2022 Clarivate Pvt Ltd National
105 Seminar Participant Top 5 Features in Webex Meetings 28/09/2022 Cisco Pvt Ltd National
106 Seminar Participant Leveraging Engineering and Technology for Disaster Risk 24/09/2022 Christ University Institutional
107 Seminar Participant 360-degree perspective on any research topic by starting at the source 14/09/2022 Clarivate Pvt Ltd National
108 Seminar Participant Ban on single use plastic 30/08/2022 ARAI and TechNovuus Pvt Ltd National
109 Seminar Participant Strategy Simulation The Five Forces 25/08/2022 Harvard Business Publishing Ltd International
110 Seminar Participant Adaptive tyres and wheel technologies 24/08/2022 ARAI and TechNovuus Pvt Ltd National
111 Seminar Participant Solid Waste Management-An Industry Perspective 22/08/2022 TechNovuus Pvt Ltd National
112 Seminar Participant E-Waste Management 19/08/2022 TechNovuus Pvt Ltd National
113 Conference Presenter International conference on recent developments in Mechanical Engineering Modelling, Temperature Analysis And Mechanical Properties Of Friction Stir Welding Of Al-Cu Joints With Hardened Ohns Steel Tools 24/06/2022 Siddaganga Institute of Technology International
114 Conference Co-presenter International conference on recent developments in Mechanical Engineering 24/06/2022 Siddaganga Institute of Technology International
115 Conference Presenter International Conference on Contemporary Innovations in Mechanical Engineering (CIME 2022) An investigation to the hardness of the cutting tool during machining Inconel 718 due to the cryogenic effect 22/04/2022 RGM College of Engineering and Technology, Nandyal 518501, Andhra Pradesh International
116 Conference Presenter International Confer Ence On Civil, Mechanical And Environmental Engineering Technolog Ies 2022 New frontiers of friction stir welding and its applications in Joining dissimilar materials 11/04/2022 SVS college of engineering and technology, Coimbatore International
117 Seminar Participant Ethics for Sustainable Collaborative Research 12/03/2022 Christ University Institutional
118 Conference Co-presenter International Conference on Recent Advances in Engineering Materials (ICRAEM 2022) 03/03/2022 Alva's Institute of Engineering and Technology International
119 Conference Co-presenter International Conference on Recent Advances in Engineering Materials (ICRAEM 2022) 03/03/2022 Alva's Institute of Engineering and Technology, Moodbidri, Karnataka, India International
120 Seminar Participant Body Wearable and Implantable Antennas 19/02/2022 Christ University National
121 Seminar Participant Using Design Thinking to Rethink, Reimagine and Reinvent Our Future 18/02/2022 Christ University International
122 Seminar Participant Inter-Multi-Disciplinary Research Paradigms and Methodological Approaches in Sustainable Built Environment Studies 12/02/2022 Christ University National
123 Seminar Participant How To Turn An Idea Into A Patent 19/11/2021 Christ University National
124 Conference Co-presenter 3rd International Conference on Manufacturing, Material Science and Engineering (ICMMSE 2021) 24/09/2021 CMR Institute of Technology, Hyderabad, Telangana International
125 Conference Presenter International conference on computing in mechanical engineering Prediction of Friction Stir Welding Parameters Using Response Surface Methodology 22/09/2021 SCMS school of engineering and technology International
126 Seminar Participant Attracting grants and funds for research 14/09/2021 Wiley India Pvt Ltd National
127 Seminar Participant Award-winning NAAC Accreditation Data Management System 09/09/2021 Inpods USA National
128 Seminar Participant Metal-organic frameworks: Structural characterization for surface area, pore size and high-pressure gas storage 07/09/2021 Anton Paar India Pvt Ltd National
129 Seminar Participant Winning the game of publishing research papers, raising your profile, and extending the impact of your publications 07/09/2021 Wiley India Pvt Ltd National
130 Seminar Participant Mastering the craft of academic writing: A systematic approach 31/08/2021 Wiley-India Pvt Ltd National
131 Seminar Participant AI and ML for core Departments with focus on current Industrial trends 27/08/2021 Christ University International
132 Seminar Participant Conquering the intricacies of citations and references 24/08/2021 Wiley-India Pvt Ltd National
133 Seminar Participant Cost of Quality & Lean Six Sigma 23/08/2021 Vision Excellence Pvt Ltd National
134 Seminar Participant How AI is influencing the future of self-driving car technology 21/08/2021 Imarticus Learning Pvt Ltd National
135 Seminar Participant The Need for Thinking out of the Box 15/08/2021 English Language Teachers Association of India (ELTAI), Chennai National
136 Seminar Participant Role of IEEE in Engineering - Various IEEE Societies, Standards and Data Center 14/08/2021 Christ University National
137 Seminar Participant 3D Printing- The Next Industrial Revolution 13/08/2021 Christ University International
138 Seminar Participant All about Open Source Software for Teaching and Learning 09/08/2021 Cheran College of Engineering, Karur, TamilNadu National
139 Conference Participant The Xseed Conference: Choose Success (India Edition) 07/08/2021 Xseed Education Pvt Ltd National
140 Seminar Participant Empowering Teachers to Integrate Technology: Challenges and Solutions 01/08/2021 English Language Teachers Association of India (ELTAI), Chennai National
141 Conference Presenter 2021 Global Conference on Recent Advances in Sustainable Materials (GC-RASM 2021) The Effect of Cutting Fluid in Improving the Machinability of Inconel 718 using Ceramic AS20 Tool 29/07/2021 A.J. Institute of Engineering and Technology, Mangalore, India International
142 Conference Co-presenter Global Conference on Recent Advances in Sustainable Materials (GC-RASM 2021) 29/07/2021 A.J. Institute of Engineering & Technology, Karnataka, India International
143 Seminar Participant Application of Lean Six Sigma in Manufacturing 23/07/2021 Christ University International
144 Seminar Participant Ecosystem Restoration 05/06/2021 Christ University National
145 Seminar Participant World Environment Day on the theme Ecosystem Restoration 05/06/2021 Mizoram University National
146 Seminar Participant NEP 2020: Reforming Higher Education 04/06/2021 SRM Institute of Science and Technology, Chennai National
147 Seminar Participant COVID 19: Disruption of life process impacting mental health 03/06/2021 Department of Clinical Psychology, Mizoram University Aizawl National
148 Seminar Participant Program Design Concepts-NAAC and NEP 2020 19/05/2021 Inpods Ed-Tech Ltd National
149 Seminar Participant Innovation and Technology Integration Towards Patent Filing 06/05/2021 Christ University National
150 Seminar Participant Manage to curb Pandemic: Prevention and Control 05/05/2021 Christ University Institutional
151 Conference Co-presenter International Conference on Futuristic Research in Engineering Smart Materials (FRESM 21) 23/04/2021 CMRIT, Bengaluru International
152 Seminar Participant Program Design Concepts based on OBE Criteria 1 of NAAC 22/04/2021 Inpods India Private Limited Regional
153 Seminar Participant Transformation of Research work into patent filing 07/04/2021 Christ University Institutional
154 Seminar Participant Design, Modeling and Simulation of Solar Thermal, Solar PV and PVT Hybrid systems using POLYSUN simulation software 15/01/2021 IndiaSoft Technologies Pvt Ltd, Pune National
155 Seminar Participant AI, ML and DL for Researchers 05/12/2020 Christ University Regional
156 Seminar Participant MATLAB and Optimization Techniques for Researchers 28/11/2020 Christ University Institutional
157 Conference Presenter 3 International e-Conference on Frontiers in Mechanical Engineering and nanoTechnology [ICFMET-2020] Variable parametric test to improve the machinability of Inconel 718 using Tungsten Carbide tool 27/11/2020 Sanjeevan Engineering & Technology Institute, Panhala & Yashwantrao Patil Science College, Solankur International
158 Conference Presenter 3rd International e-Conference on Frontiers in Mechanical Engineering and nanoTechnology [ICFMET-2020] held on 27 & 28 Nov. 2020 Variable parametric test to improve the machinability of Inconel 718 using Tungsten Carbide tool 27/11/2020 Sanjeevan Engineering & Technology Institute, Panhala & Yashwantrao Patil Science College, Solankur International
159 Seminar Participant Applications of Collaborative Robots 29/10/2020 Bharath Institute of Higher Education and Research, Chennai National
160 Seminar Participant Machine Learning 24/10/2020 Christ University National
161 Seminar Participant Trends and Developments in Robotics 23/10/2020 Christ University International
162 Conference Participant Frontiers in Manufacturing Technology (FMT 2020) 13/10/2020 Kalinga Institute of Industrial Technology (KIIT), Deemed to be University, Bhubaneswar, Odisha, India International
163 Seminar Participant Redefining the Service Robots after COVID-19 : Shift in Enhancing Service to Essential Service 19/09/2020 Christ University International
164 Seminar Participant Latest Trends in Research and Publication in Manufacturing Engineering 12/09/2020 Christ University International
165 Seminar Participant Manipulators in Robotics - Research Applications 05/09/2020 Christ University International
166 Seminar Participant Design of Nonlinear Vibration Control systems for Robotics applications 03/09/2020 Christ University International
167 Seminar Participant Industry Automation and Robotics: Challenges and Opportunities 28/08/2020 Christ University International
168 Seminar Participant Writing and Publishing Research Articles in SCI Journals - A Framework 19/08/2020 RajaRajeswari College of Engineering, Bangalore National
169 Seminar Participant Design Basics of Electric Vehicles 17/08/2020 Christ University National
170 Seminar Participant Effective and practical journey towards NBA Accreditation 17/08/2020 Ideal College of Pharmacy and Research, Kalyan National
171 Seminar Participant Future of I.C.Engine 05/08/2020 Christ University International
172 Seminar Participant Techno Legal Summit on CAP (Cyber, AI and Patents) 03/08/2020 St Joseph Engineering College and S D M Law College, Mangaluru National
173 Seminar Participant Counselling services during COVID 19 Pandemic Period 30/07/2020 Indra Ganesan Group of Instituitions, Manikandam, Tiruchirappalli National
174 Seminar Participant Managing Hyperactivity During COVID 19 29/07/2020 Indra Ganesan Group of Instituitions, Manikandam, Tiruchirappalli National
175 Seminar Participant Take away from the Pandemic 28/07/2020 Indra Ganesan Group of Instituitions, Manikandam, Tiruchirappalli National
176 Seminar Participant Innovations for Atmanirbaratha for Electric Vehicles 24/07/2020 Christ University National
177 Seminar Participant Writing and Publishing Research Articles in SCI journals 18/07/2020 Indra Ganesan Instituitions, Manikandam, Tiruchirappalli National
178 Seminar Participant V2X Communication 10/07/2020 Christ University National
179 Symposium Participant 3D Printing Technology 08/07/2020 A J Institute of Engineering and Technology, Mangaluru National
180 Symposium Participant Mechanical Behavior of Materials 01/07/2020 Chennai Institute of Technology National
181 Seminar Participant Technology and Business in Current Scenario 26/06/2020 Christ University Regional
182 Seminar Participant Innovation in Advanced Materials Processing and Manufacturing (IAMPM 2020) 24/06/2020 Centre for Innovation Manufacturing Research, VIT Vellore International
183 Seminar Participant EV and Energy Storage Devices in Electric Distribution Systems 20/06/2020 Christ University National
184 Seminar Participant Prospects in optimisation techniques: Local and global aspects 19/06/2020 Rajarajeswari College of Engineering, Bangalore National
185 Symposium Participant Engineering Graphics 19/06/2020 B.L.D.E.A's V.P.Dr.P.G. Halakatti College of Engineering and Technology, Vijayapura, Karnataka National
186 Conference Co-presenter International Conference on Novelty in Applied Science, Engineering and Technology (ICNAET 2020) 17/06/2020 New Prince Shri Bhavani College of Engineering and Technology, Chennai International
187 Seminar Participant Principles of Automotive Dynamics and Control 15/06/2020 Christ University National
188 Symposium Participant NAAC Revised Accreditation Framework 10/06/2020 Dr. Ambedkar College of Arts, Commerce and Science, Chandrapur National
189 Seminar Participant Intellectual Property Rights Patent Filing Procedure 09/06/2020 K.L.E. Institute of Technology, Hubballi National
190 Symposium Participant Improving the Skill Set and Changing the Attitude 05/06/2020 ICT ACADEMY National
191 Seminar Participant Gender Sensitization: Need of the hour 26/05/2020 Dr. Bhimrao Ambedkar University, Agra National
192 Seminar Participant Could Virtual Education System Become New Normal 24/05/2020 IEEE Bangalore Section Regional
193 Seminar Participant Learning Machine Learning Preparing to contribute to the next industrial revolution 16/05/2020 IEEE RITB National
194 Seminar Participant Season 5-The Future of Skills-Education, Employment and Entrepreneurship 11/05/2020 ICT Academy National
195 Seminar Participant Season 4-The Future of Education, Employment and Entrepreneurship 04/05/2020 ICT Academy National
196 Seminar Participant Season 3- The Future is Here Now 27/04/2020 ICT Academy National
197 Symposium Participant Virtual IEEE Faculty Conclave for Non IEEE Faculty Members 25/04/2020 IEEE Bangalore Section Regional
198 Seminar Participant Season 2-Leading in a VUCA World 20/04/2020 ICT Academy National
199 Seminar Participant Season 1- Technology for Future 09/04/2020 ICT Academy National
200 Symposium Participant Innovation by Design 30/03/2020 IEEE TEMS National
201 Conference Presenter International Conference on Advanced Light-Weight Materials and Structures (ICALMS2K20) Influence of cutting fluid on improving the machinability of Inconel 718 - The Review 06/03/2020 Department of Mechanical Engineering, CMR Technical Campus, Hyderabad, Telangana, India International
202 Seminar Participant National Seminar on NAAC Assessment and Accreditation Building Instituitional Competencies 05/03/2020 Christ University National
203 Seminar Participant Two Day National Level Seminar on Additive and Advanced Manufacturing 29/07/2019 Bangalore Institute of Technology, Bengaluru National
204 Conference Presenter International Conference on Advances in Materials Research (ICAMR 2019) Influence of cryogenic treatment of cutting tool inserts on tool wear and surface roughness during milling of Inconel 718 25/07/2019 Ramaiah University of Applied Sciences, Bengaluru International
205 Conference Co-presenter 3rd International conference on recent research emerging trends in materials and mechanical engineering (ICRRETMME 2019) 12/07/2019 Reva University, Bangalore International
206 Conference Co-presenter 3rd International conference on recent research emerging trends in materials and mechanical engineering (ICRRETMME 2019) 12/07/2019 Reva University, Bangalore International
207 Conference Co-presenter International Conference on Advancements in Mechanical Engineering (ICAME 2019) 10/04/2019 Jyothi Engineering College International
208 Conference Presenter International Conference on Design, Materials, Cryogenics and Constructions An experimental analysis of machinability characteristics for investigating the machinability of Inconel 718 using ceramic inserts 28/03/2019 Vel Tech Rangarajan Dr Sagunthala R&D Institute of Science and Technology International
209 Conference Co-presenter International Conference on Recent trends in advanced material processing 20/03/2019 Chennai Institute of Technology, Chennai International
210 Conference Co-presenter International Conference on Advanced Ceramics and Nanomaterials for Sustainable Development (ACeND 2018) An Experimental Investigation of Cutting Parameters for Determining the Machinability of Inconel 718 using Cryogenic Treated Ceramic Inserts 19/09/2018 Christ University International
211 Conference Co-presenter International Conference on Advanced Ceramics and Nanomaterials for Sustainable Development (ACeND 2018) Optimization of Machining Parameters for Improving the Machinability of Inconel 718 using Ceramic Cutting Tool 19/09/2018 Christ University International
212 Conference Co-presenter International Conference on Advanced Ceramics and Nanomaterials for sustainable development 19/09/2018 Indian Ceramic Society Karnataka Chapter and CHRIST (Deemed to be University) International
213 Conference Presenter International Conference on Robotics and Smart Manufacturing (ROSMA 2018) An approach to parametric study of machining parameters in determining the machinability of Inconel 718 with optimization technique 19/07/2018 IIITDM Kancheepuram, Chennai, India International
214 Conference Co-presenter 3rd International Conference in Design, Analysis, Manufacturing and Simulation (ICDAMS 2018) Selection of Cutting Parameters for the Machinability of Inconel 718 using Grey Relational Analysis 06/04/2018 Department of Mechanical and Automobile Engineering, Saveetha School of Engineering, Chennai Institutional
215 Conference Presenter 3rd International Conference on Design, Analysis, Manufacturing and Simulation Selection of cutting parameters for the machinability of Inconel 718 using Grey Relational Analysis 06/04/2018 Saveetha Institute of Medical and Technical Sciences, Tamil Nadu, India International
216 Conference Co-presenter 3rd International Conference on Advanced Manufacturing and Automation 05/04/2018 Kalasalingam Academy of Research and Education (Deemed to be University) International
217 Conference Co-presenter National Conference on Mechanical Engineering and Emerging Technologies 23/02/2018 Christ University National
218 Conference Co-presenter National Conference on Mechanical Engineering and Emerging Technologies 23/02/2018 Christ University National
219 Conference Presenter Second International Conference on Mechanical and Manufacturing Engineering A Review on parametric study of hard machining of Inconel 718 using coated carbide tool 06/04/2017 SCSVMV University International
220 Seminar Participant Webinar on High Quality Surface Design using Catia V5 08/02/2017 EDS Technologies Pvt Ltd National
221 Participant Webinar on Casting Simulation and Defect Prediction using Z-CAST PRO 23/01/2017 DHIO Research & Engineering Pvt. Ltd National
222 Conference Presenter Experimental Investigation on the drilling Parameters affected by nanofluid using minimum quantity lubrication - International
Sl.No. Title of the Program Name of the Program Date Name of the Institution
1 Experiential Learning Training program on Scaffolding Adult Learning through Learner-Centered Approach 06/03/2024 Bangalore Yeshwanthpur Campus, CHRIST (Deemed to be University)
2 Experiential Learning Training program on Scaffolding Adult Learning through Learner-Centered Approach 02/03/2024 Bangalore Central Campus, CHRIST (Deemed to be University)
3 Outcome Based Education (OBE) for Faculty Training Session on OBE Faculty Bannerghatta Road Campus 07/09/2022 Bangalore Bannerghatta Campus, CHRIST (Deemed to be University)
4 Outcome Based Education (OBE) Training Session on OBE 01/09/2022 School of Sciences, CHRIST (Deemed to be University), Bangalore
5 Practice of Outcome Based Education (OBE) Workshop on the practice of OBE 13/08/2022 Bangalore Central Campus, CHRIST (Deemed to be University)
Sl.No. Title Genre Producer Copyrights
1 Square Fitting Workshop Practice Lab Video Manual Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
2 V-Fitting Workshop Practice Lab Video Manual Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
3 Dovetail Fitting Workshop Practice Lab Video Manual Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
4 Sheet Metal Work Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
5 Welding-Butt Joint Workshop Practice Lab Video Manual Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
6 Welding-Lap Joint Workshop Practice Lab Video Manual Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
7 Welding-T Joint Workshop Practice Lab Video Manual Centre for Concept Design, Christ Deemed to be University Christ Deemed to be University
8 Introduction to Renewable and Non-renewable Energy Sources Basics of Mechanical Engineering and Nanoscience Chapter-1 CHRIST (Deemed to be University) CHRIST (Deemed to be University)
9 Types of Renewable Energy Basics of Mechanical Engineering and Nanoscience Chapter-1 CHRIST (Deemed to be University) CHRIST (Deemed to be University)
10 Types of Non-Renewable Energy Basics of Mechanical Engineering and Nanoscience Chapter-1 CHRIST (Deemed to be University) CHRIST (Deemed to be University)
Sl.No. Title Guide Name Institution Month Year
Sl.No. Title Name of Student Institution Month Year
Sl.No. Title of Invention Inventor(s) Filing Date
1 DEVICE TO LOCATE LEAKAGE AND BLOCKAGE IN PIPELINES (BASED ON ARTIFICIAL INTELLIGENCE) PALPANDIAN P,IVAN SUNIT ROUT, DR. P.VIJAYALAKSHMI, DR. BATTULA TIRUMALA KRISHNA 12-Sep-2022

Additional information

Title of Invention DEVICE TO LOCATE LEAKAGE AND BLOCKAGE IN PIPELINES (BASED ON ARTIFICIAL INTELLIGENCE)
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) PALPANDIAN P,IVAN SUNIT ROUT, DR. P.VIJAYALAKSHMI, DR. BATTULA TIRUMALA KRISHNA
Type of Specification Complete
Type of Patent
Granted/Awarded Date 13-Jan-2023
Publication/Application Date 13-Jan-2023
Application/Filing Date 12-Sep-2022
IPC Number
Publication Number 370733-001
Patent Number 370733-001
Field of Invention Design and Artificial Intelligence
2 Fully automatic commercial line vehicle assembly line system PALPANDIAN P,IVAN SUNIT ROUT,DR. M. SRINIVASNAIK, DR. M.SIVAKUMAR,DR. R.RAMESH KUMAR, DR. ARVIND BODHE,DR. BODA SURYA VENKATA RAMARAO, DR. P.KANAKARAJAN 09-Feb-2022

Additional information

Title of Invention Fully automatic commercial line vehicle assembly line system
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) PALPANDIAN P,IVAN SUNIT ROUT,DR. M. SRINIVASNAIK, DR. M.SIVAKUMAR,DR. R.RAMESH KUMAR, DR. ARVIND BODHE,DR. BODA SURYA VENKATA RAMARAO, DR. P.KANAKARAJAN
Type of Specification Provisional
Type of Patent
Granted/Awarded Date
Publication/Application Date 09-Feb-2022
Application/Filing Date 09-Feb-2022
IPC Number
Publication Number 202241007000 A
Patent Number 202241007000 A
Field of Invention Manufacturing - Assembly line
3 DEVELOPMENT OF MULTI-SENSOR SMART ROBOT FOR INTELLIGENT BORDER SECURITY SURVEILLANCE SYSTEM PALPANDIAN P,IVAN SUNIT ROUT,DR YARRAPRAGADA K S S RAO, MR RONALD CHIWARIRO,DR. NITHIN H S, DR. B SOMASUNDARAM,MR.RAMASHIS BANERJEE, DR. MOHAMMED IMRAN,DR.BUDDESAB, DR. RAVI KUMAR KANDAGATLA,MR. RAJESH A S, )MR. MAHESH KUMAR A S 27-Jul-2021

Additional information

Title of Invention DEVELOPMENT OF MULTI-SENSOR SMART ROBOT FOR INTELLIGENT BORDER SECURITY SURVEILLANCE SYSTEM
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) PALPANDIAN P,IVAN SUNIT ROUT,DR YARRAPRAGADA K S S RAO, MR RONALD CHIWARIRO,DR. NITHIN H S, DR. B SOMASUNDARAM,MR.RAMASHIS BANERJEE, DR. MOHAMMED IMRAN,DR.BUDDESAB, DR. RAVI KUMAR KANDAGATLA,MR. RAJESH A S, )MR. MAHESH KUMAR A S
Type of Specification Provisional
Type of Patent
Granted/Awarded Date
Publication/Application Date 27-Jul-2021
Application/Filing Date 27-Jul-2021
IPC Number
Publication Number 202141033795
Patent Number 202141033795
Field of Invention Robotics
Sl.No. Name of the Research Project Investigator(s) Sponsors Internal/External
1 Parametric optimization of hard machining of Inconel 718 using coated tools PALPANDIAN P, IVAN SUNIT ROUT Internal
2 Synthesis of Eco friendly 3D printable filament from discarded plastic materials and ceramic nano particles FRANCIS XAVIER L, IVAN SUNIT ROUT,SHIVAKUMAR S,SAJNA PARIMITA PANIGRAHI Internal
3 Retrofitting of conventional CNC Milling Machine to digitalized transformation for smart manufacturing IVAN SUNIT ROUT, ANIL RAJ,AMRUTA ROUT,VENKATASWAMY R,REKHA V Internal
4 Additive Manufacturing of Carbon Allotropes based INVAR Composite for Space Applications FRANCIS XAVIER L, IVAN SUNIT ROUT,FRANCIS.XAVIERDR T. RAMESH ISRO Space Technology Incubation Centre, NIT Trichy External
Sl.No. Name of the Conference/Seminar Name of Organiser Level Date
Sl.No. Name of the Workshop/FDP/Training programme Name of Oraganiser Level Role Date
1 Whole Person Education for Faculty in Higher Education TLEC and CEDBEC, CHRIST (Deemed to be University) National Participant 20/03/2024
2 Patent Drafting for Engineers ARAI and TechNovuus Pvt Ltd National Participant 09/03/2024
3 Stakeholder Engagement and Communication CSRBOX Foundation Ltd National Participant 27/02/2024
4 Bosch Automotive Workshop CHRIST (Deemed to be University) Institutional Participant 06/02/2024
5 Leadership Workshop Christ University Higher Education Leadership Institute Institutional Participant 02/02/2024
6 Autodesk Fusion360 CHRIST (Deemed to be University) Institutional Participant 16/01/2024
7 Outcome Based Curriculum Designing Management Systems Inpods Ed-tech Ltd National Participant 19/10/2023
8 Faculty Development Programme I- 2023 CHRIST (Deemed to be University) Institutional Participant 26/06/2023
9 Teaching with Simulations Harvard Business Publishing Ltd International Participant 22/06/2023
10 Robot Framework of Mark-1 Kit by Yagen Robotics CHRIST (Deemed to be University) Institutional Invited Resource Person/Trainer 03/06/2023
11 Advanced Industry Powered Faculty Immersion Program L & T Edutech, Chennai National Participant 29/05/2023
12 Comet Assay to Study Antimutagenic Activity of Different Compounds Nano Science and Technology Consortium National Participant 28/04/2023
13 Synthesis of Carbon Dots from Kitchen Waste Nano Science and Technology Consortium National Participant 20/04/2023
14 Decoding the Risk Assessment (EHS) Nano Science and Technology Consortium National Participant 19/04/2023
15 Nanostructured Ceramics Fundamentals to Prototypes Nano Science and Technology Consortium National Participant 10/04/2023
16 Microbial Fuel Cells The Next Generation of Sustainable Energy Technology Nano Science and Technology Consortium National Participant 05/04/2023
17 Advanced Workshop on Building of Robots and Drones CHRIST (Deemed to be University) Institutional Participant 30/03/2023
18 Designing High Performance Buildings with Passive Strategies and Software Tools Nano Science and Technology Consortium National Participant 25/03/2023
19 Environmental, Social and Governance (ESG)- Sustainable Business Strategies Nano Science and Technology Consortium National Participant 20/03/2023
20 Machine Learning Nano Science and Technology Consortium National Participant 18/03/2023
21 Quantum Dots and their Biological and Sensor Applications Nano Science and Technology Consortium National Participant 16/03/2023
22 R Programming: Advanced Excel Nano Science and Technology Consortium National Participant 03/03/2023
23 Nanoparticles based Electrochemical Sensors Nano Science and Technology Consortium National Participant 16/02/2023
24 Learn and Deploy Machine Learning Algorithms in Cloud Skill Lync Pvt Ltd National Participant 15/02/2023
25 From The Sea to the Lab: Understanding the Potential of Marine Biomaterials Nano Science and Technology Consortium National Participant 11/02/2023
26 Introduction To 3D Bioprinting Skill Lync Pvt Ltd National Participant 11/02/2023
27 Marine Biomaterials: Tools and Techniques Nano Science and Technology Consortium National Participant 10/02/2023
28 Building of Robots and Drones CHRIST (Deemed to be University) Institutional Participant 09/02/2023
29 Automotive Standards And V Cycle Skill Lync Pvt Ltd National Participant 08/02/2023
30 Car Aerodynamics Using OpenFOAM Skill Lync Pvt Ltd National Participant 07/02/2023
31 How to build and test 5G Networks? Skill Lync Pvt Ltd National Participant 06/02/2023
32 Design of Automotive Bumper using CATIA V5 Skill Lync Pvt Ltd National Participant 05/02/2023
33 Hands-on with Internet of Things (IoT) Skill Lync Pvt Ltd National Participant 03/02/2023
34 Effective Scientific Writing: Techniques and Strategies for Communicating Research Findings Nano Science and Technology Consortium National Participant 01/02/2023
35 Product Designing of Medical Products Skill Lync Pvt Ltd National Participant 01/02/2023
36 Create and Deploy Frontend for Movie Applications like IMDb Skill-Lync Pvt Ltd National Participant 24/01/2023
37 Calorimetric Nanosensors for Detection of Industrial and Environmental Pollutants, and Pathogenic Biomarker: The Nano Eye approach Nano Science and Technology Consortium National Participant 23/01/2023
38 Dashboarding with Power BI Skill Lync Pvt Ltd National Participant 19/01/2023
39 Curriculum Design and Revision with specific focus on OBE Staff Development College, CHRIST (Deemed to be University) Institutional Participant 05/12/2022
40 Robotics, Vision and Control:Industrial Applications CHRIST (Deemed to be University) Institutional Participant 07/11/2022
41 Basics of Bibliometrics Clarivate Pvt Ltd National Participant 17/10/2022
42 Amazon Web Services GMR Institute of Technology, Rajam and Brainovision solutions India Pvt Ltd National Participant 22/08/2022
43 21st Century Skills for Teaching and Learning GMR Institute of Technology National Participant 16/08/2022
44 Faculty Development Programme I- 2022 CHRIST (Deemed to be University) Institutional Participant 06/07/2022
45 Interdisciplinary approaches and adopting the transition CHRIST (Deemed to be University) Institutional Participant 27/05/2022
46 FDP on Interdisciplinary Approaches and Adopting the Transition Department of Mechanical and Automobile Engineering,CHRIST (Deemed to be University) Institutional Organiser & Participant 27/05/2022
47 Five Days Online FDP on Academic Writing St Joseph Engineering College, Mangaluru-575028 National Participant 04/04/2022
48 Accreditation and Strategic Building Department of Mechanical and Automobile Engineering,CHRIST (Deemed to be University) Institutional Participant 24/03/2022
49 Applications of Artificial Intelligence and Machine Learning in Mechanical Engineering SRM Institute of Science and Technology, Vadapalani Campus, Chennai National Participant 04/10/2021
50 Electric Vehicle Technology IEEE Mysore Subsection and IEEE Standards Association National Participant 30/08/2021
51 Introduction to AUTOSAR and Vehicle Network Toolbox E-Mobility R & D Centre, School of Engineering & Technology, CHRIST (Deemed to be University), Math Works & CoreEL Technologies Regional Participant 19/08/2021
52 Equilibrium Thinking for Startups and Established Organizations VelTech Rangarajan Dr Sagunthala R&D Institute of Science and Technology, Chennai National Participant 04/08/2021
53 The Art of Doing Research Jyothi Engineering College, Thrissur, India, CHRIST (Deemed to be University), Bangalore, India and Pelita Bangsa University, Indonesia in association with Internal Quality Assurance Cell (IQAC) International Participant 12/07/2021
54 Faculty Development Programme I- 2021 CHRIST (Deemed to be University) Institutional Participant 16/06/2021
55 Digital Teaching Techniques ICT Academy, India National Participant 07/06/2021
56 Role of Holistic Education in Building an Equitable, Safer and Happier Society Madhav Institute of Technology and Science, Gwalior National Participant 05/06/2021
57 Hybrid Teaching Staff Development College Participant 02/03/2021
58 Artificial Intelligence & Machine Learning (Beginner) Dept. of Computer Science and Engineering, School of Engineering and Technology, CHRIST (Deemed to be University) Institutional Participant 02/10/2020
59 Module 2: Professional Ethics and Sustainability All India Council for Technical Education (AICTE) National Participant 10/09/2020
60 Module 1: Orientation Towards Technical Education and Curriculum Aspects All India Council for Technical Education (AICTE) National Participant 10/09/2020
61 Advancements and Futuristic Trends in Materials and Mechanical Engineering Bangalore Institute of Technology National Participant 27/07/2020
62 Advanced Materials (Fabrication, Characterization and Applications) Kalinga Institute of Industrial Technology (KIIT), Bhubaneswar, Odisha National Participant 20/07/2020
63 Pioneering AI Technology-A Case Study Approach Dayananda Sagar University, Bengaluru National Participant 22/06/2020
64 Making the Case for Robotic Process Automation Coursera International Participant 11/06/2020
65 Robotica Coursera International Participant 20/05/2020
66 IEEE Reference Management tool for research articles and thesis writing IEEE SIGHT Regional Participant 20/05/2020
67 Learning, Pedagogy and Effective Use of Case Methodology ASM Group of Institutes National Participant 17/05/2020
68 CAM using Fusion 360 (Online Live FDP) ICT Academy National Participant 07/05/2020
69 Intelligent Machining Coursera International Participant 02/05/2020
70 Introduction to CAD, CAM and Practical CNC Machining Coursera International Participant 02/05/2020
71 Effective Online Engineering Education: Tips and Tricks IEEE TEMS BANGALORE Regional Participant 26/04/2020
72 Online Teaching CHRIST (Deemed to be University), Bangalore Participant 22/04/2020
73 Writing a Competitive Grant Research Proposal IEEE SIGHT National Participant 20/04/2020
74 Learning To Teach Online Coursera International Participant 04/04/2020
75 Intro to Digital Manufacturing with Autodesk Fusion 360 Coursera International Participant 01/04/2020
76 NPTEL-Computer Integrated Manufacturing Indian Institute of Technology Kanpur National Participant 05/02/2020
77 Workshop on Research and modern tools usage Department of Mechanical and Automobile Engineering, Faculty of Engineering, CHRIST (Deemed to be University) Institutional Organiser & Participant 30/05/2019
78 Teaching pedagogy and evaluation process in outcome based education Department of Mechanical and Automobile Engineering, Christ University Faculty of Engineering Participant 20/05/2019
79 English Proficiency Centre for Academic and Professional Support, CHRIST (Deemed to be University) Institutional Participant 15/03/2019
80 E Learning Module on The Art of Note Taking Centre for Academic and Professional Support (CAPS) Institutional Participant 12/03/2019
81 Short Course on Applied Rheology Anton Paar India Regional Participant 06/02/2019
82 Workshop on Research Methodology and IEEE Authorship Lab Department of Computer Science (PG), Kristu Jayanti College in association with IEEE ComSoc, Bangalore Regional Participant 01/02/2019
83 Workshop on Outcome Based Education (OBE) Faculty of Engineering, CHRIST (Deemed to be University) Institutional Participant 03/12/2018
84 Forging an academic community to revitalize the strategic plan and Holistic Education CHRIST (Deemed to be University), Bangalore Institutional Participant 23/11/2018
85 E-Learning Module on Resume Writing Centre for Academic and Professional Support (CAPS) Institutional Participant 19/11/2018
86 E Learning Module on Basic Research Skills Centre for Academic and Professional Support (CAPS) Institutional Participant 10/09/2018
87 Faculty Improvement Program on Intellectual Property Rights Department of Mechanical and Automobile Engineering, Faculty of Engineering, CHRIST (Deemed to be University) Institutional Organiser & Participant 06/08/2018
88 Author workshop on How to write and Publish Scientific articles and manuscripts Springer Nature and CHRIST (Deemed to be University) Institutional Participant 12/06/2018
89 Frontier areas in the subject and curriculum updation Faculty of Engineering, Mechanical Engineering department Participant 21/05/2018
90 Fifty Years of Growth and Future: Sustaining our University culture, strategic vision and Leadership Centre for Education Beyond Curriculum, Christ (Deemed to be University) Institutional Participant 14/05/2018
91 Modular training workshop on MANOVA & ANOVA Centre for Advanced Research and Training Institutional Participant 29/01/2018
92 Teaching, Learning and Evaluation Department of Mechanical and Automobile Engineering, Christ University Faculty of Engineering Participant 24/05/2017
93 Creating Standards for Research, Collaborative Projects and Consultancy Centre for Education Beyond Curriculum, Christ University Institutional Participant 15/05/2017
94 Intellectual Property Rights (IPR) Centre for Education Beyond Curriculum, Christ University Regional Participant 27/03/2017
95 Research Issues and Challenges on Sustainable Supply Chain Management Department of Manufacturing, School of Mechanical Engineering, VIT University, Vellore National Participant 04/03/2017
96 Data Analysis using SPSS Centre for Advanced Research & Training, Christ University, Bengaluru National - 24/10/2016
97 Research-Trends, Tools and Processes Christ University Faculty of Engineering, Mechanical Engineering Department - 24/09/2016
98 3D Printer and Kuka Robotics Christ University Faculty of Engineering, Mechanical Engineering Department Institutional - 04/08/2016
99 Quality Sustenance and Enhancement through Innovation Internal Quality Assurance Cell, Christ University, Bengaluru Institutional - 27/05/2016
100 Research Enablers and its Thrust Area Christ University Faculty of Engineering, Mechanical Engineering Department Institutional - 23/05/2016
Sl.No. Name of the Awards/Achievements/Others Description Organisation Month/ Year
1 Gold Medalist Master of Technology in Mechanical Engineering (Production Engineering) Samhigginbottom Institute of Agriculture, Technology and Sciences-Deemed to be University 03 August 2012
2 NPTEL Online certification Computer Numerical Control Of Machine Tools and Processes Indian Institute of Technology Kharagpur 31 March 2018
3 Senior Member, Indian Society of Mechanical Engineers Certificate of Professional Membership Qualification of Indian Society of Mechanical Engineers Indian Society of Mechanical Engineers (ISME) 26 February 2019
4 Best Paper Award at International Conference on Design, Materials, Cryogenics and Constructions (ICDMC 2019), Chennai Best Paper Award for presentation titled Än experimental analysis of machinability charactersitics for investigating the machinability of Inconel 718 in International Conference on Design, Materials, Cryogenics and Constructions (ICDMC 2019) Vel Tech Rangarajan Dr Sagunthala R&D Institute of Science and Technology, Chennai, India 29 March 2019
5 Best Poster at International Conference on Advanced Ceramics and Nanomaterials for Sustainable Development (ACeND 2018),Bangalore Best Poster titled Ëxperimental study of response parameters for improving the machinability of Inconel 718 using ceramic inserts" at International Conference on Advanced Ceramics and Nanomaterials for Sustainable Development (ACeND 2018) Faculty of Engineering, CHRIST (Deemed to be University) and Indian Ceramic Society Karnataka Chapter 21 September 2018
6 NPTEL Online Certification on Introduction to Machining and Machining Fluids Introduction to Machining and Machining Fluids Indian Institute of Technology Guwahati 13 May 2019
7 Online Quiz in English Grammar Online Quiz in English Grammar CHRIST (Deemed to be University) in association with English Language Teachers Association of India (ELTAI) 15 June 2020
8 Best Oral Presentation Award at 3rd International e-Conference on Frontiers in Mechanical Engineering and nano Technology [ICFMET-2020] Best Oral Presentation Award for presentation titled Variable parametric test to improve the machinability of Inconel 718 using Tungsten Carbide tool in 3rd International e-Conference on Frontiers in Mechanical Engineering and nano Technology (ICFMET 2020) Sanjeevan Engineering & Technology Institute, Panhala and Yashawantrao Patil Science College, Solankur 28 November 2020
9 Quiz in National Road Safety Month Awareness Programme National Road Safety Month Awareness Programme The Automotive Research Association of India 03 February 2021
10 Day 2- Quiz in National Road Safety Month Awareness Programme National Road Safety Month Awareness Programme The Automotive Research Association of India 12 February 2021
11 Elsevier Reviewer Recognition Review Contribution to the Journal Materials Today Proceedings, Elsevier Elsevier Ltd 03 January 2022
12 Reviewer Recognition by Journal of Advances in Materials and Processing Technology, Taylor and Francis Review Contribution to the Journal of Advances in Materials and Processing Technology, Taylor and Francis Taylor and Francis Group 12 March 2022
13 Certificate of Honour for Best Research Paper Award Best Research Paper Award from International Conference on Design, Materials, Cryogenics and Constructions during the year 2019 by CHRIST (Deemed to be University), Bangalore CHRIST (Deemed to be University) 25 February 2022
14 Certificate of Honour for Reviewer of Lunday (Research Journal) Reviewer of Lunday (Research Journal) from Bulcan State University during the year 2019 by CHRIST (Deemed to be University), Bangalore. CHRIST (Deemed to be University) 25 February 2022
15 Best Paper Award at International Conference on Contemporary Innovations in Mechanical Engineering (CIME-2022) Best Paper Award for presentation titled An investigation to the hardness of the cutting tool during machining Inconel 718 due to the cryogenic effect in International Conference on Contemporary Innovations in Mechanical Engineering (CIME-2022) RGM College of Engineering and Technology 23 April 2022
16 Excellence in Teaching Award This award is given to one outstanding Faculty acknowledging exceptional teaching practices and contributions. Christ University 05 September 2024
Sl.No. Faculties Theme of Consultancy Type
Sl.No. Applicants Title Date Published
1 PALPANDIAN P,IVAN SUNIT ROUT,DR. MUTHUKUMAR SUBRAMANIAN,RAMASHIS BANERJEE A robotic assembly with AI & ML interfaces for better path obstruction handling. 28/09/2021

CHRIST

(Deemed to be University)

Dharmaram College Post, Hosur Road, Bengaluru - 560029,
Karnataka, India

Tel: +91 804012 9100 / 9600

Fax: 40129000

Email: mail@christuniversity.in

Web: http://www. christuniversity.in

Vision

EXCELLENCE AND SERVICE

Mission

CHRIST (Deemed to be University) is a nurturing ground for an individual's holistic development to make effective contribution to the society in a dynamic environment.

Copyright © CHRIST (Deemed to be University) 2020 | Privacy Policy