Faculty

Profile

Dr GURUMOORTHY S HEBBAR

BE, MTech, PhD
PROFESSOR

SCHOOL OF ENGINEERING AND TECHNOLOGY
BANGALORE CAMPUS
 Print Profile

Sl.No. Title Name of Periodical Periodicity Date
Sl.No. Title Name of Journal Date of Publication Volume No/Issue No/Page No
1 Analytical Estimation and Experimental Validation of the Bending Stiffness of the Transmission Line Conductors Journal of Mechanical Engineering 15-Jan-2024 21 / 1 / 23-43

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) HADIYA PRITESH DULABHAI,GURUMOORTHY S HEBBAR,PARTHASARATHY N.S.
Title of Article Analytical Estimation and Experimental Validation of the Bending Stiffness of the Transmission Line Conductors
Name of Journal Journal of Mechanical Engineering
Volume No 21
Issue No 1
Page No 23-43
URL https://jmeche.uitm.edu.my
Indexing Agency Scopus
Date of Publication 15-Jan-2024
2 Maximised Bioethanol Extraction from Bamboo Biomass through Alkali Pretreatment and Enzymatic Saccharification by application of ANN-NSGA-II based optimisation method Environment, Development and Sustainability 30-Nov-2023 / / -

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) KIRAN K,NIRMAL JOSE,AMRUTA ROUT,RAVIKUMAR R,GURUMOORTHY S HEBBAR
Title of Article Maximised Bioethanol Extraction from Bamboo Biomass through Alkali Pretreatment and Enzymatic Saccharification by application of ANN-NSGA-II based optimisation method
Name of Journal Environment, Development and Sustainability
Volume No
Issue No
Page No -
URL https://www.springer.com/journal/10668
Indexing Agency Scopus
Date of Publication 30-Nov-2023
3 Influence of nano hexagonal boron nitride on the wear properties of aluminium alloy Advances in Materials and Processing Technologies 26-May-2023 May / / -

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) SHIJO THOMAS,LIJO P THOMAS,SANTHOSH N,PRADEEP KUMAR G S ,GURUMOORTHY S HEBBAR
Title of Article Influence of nano hexagonal boron nitride on the wear properties of aluminium alloy
Name of Journal Advances in Materials and Processing Technologies
Volume No May
Issue No
Page No -
URL https://www.tandfonline.com/loi/tmpt20
Indexing Agency Scopus
Date of Publication 26-May-2023
4 An Overview of Nano-Catalysts in Biodiesel Production Journal of Mines, Metals & Fuels 01-May-2023 70 / 8 / -

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) KIRAN K,RAVIKUMAR R,GURUMOORTHY S HEBBAR,NARESH H,SAJNA PARIMITA PANIGRAHI
Title of Article An Overview of Nano-Catalysts in Biodiesel Production
Name of Journal Journal of Mines, Metals & Fuels
Volume No 70
Issue No 8
Page No -
URL https://www.informaticsjournals.com/index.php/jmmf/about
Indexing Agency Scopus
Date of Publication 01-May-2023
5 Green Synthesized ZnO Nanoparticles as Biodiesel Blends and its Effect on Performance and Emission of Greenhouse Gases Molecules 20-Apr-2022 9 / 27 / 1-15

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) KIRAN K,GURUMOORTHY S HEBBAR,JAYACHAMARAJAPURA PRANESH SHUBHA,SYED FAROOQ ADIL,MUJEEB KHAN,MOHAMMAD RAFE HATSHAN,ADIBAH MUKHLID ALMUTAIRI,BAJI SHAIK
Title of Article Green Synthesized ZnO Nanoparticles as Biodiesel Blends and its Effect on Performance and Emission of Greenhouse Gases
Name of Journal Molecules
Volume No 9
Issue No 27
Page No 1-15
URL https://www.mdpi.com/journal/molecules
Indexing Agency Web of Science
Date of Publication 20-Apr-2022
6 Studies on Parametric Optimization of HVOF-Sprayed Cr2O3 Coatings on Al6061 Alloy Transactions of the Indian Institute of Metals 03-Jun-2021 / / -

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) HARISH KUMAR M,PRADEEP KUMAR G S ,SHIJO THOMAS,H M YEGNESH,SHARADA BHARADWAJ,GURUMOORTHY S HEBBAR
Title of Article Studies on Parametric Optimization of HVOF-Sprayed Cr2O3 Coatings on Al6061 Alloy
Name of Journal Transactions of the Indian Institute of Metals
Volume No
Issue No
Page No -
URL https://link.springer.com/article/10.1007%2Fs12666-021-02295-6
Indexing Agency Web of Science and Scopus
Date of Publication 03-Jun-2021
7 Investigations on Slurry Erosive on Wear Performance of HVOF-Sprayed Cr2O3 Coatings on Aluminum Alloy Journal of Bio- and Tribo-Corrosion 02-Jun-2021 106 / 7 / -

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) HARISH KUMAR M,PRADEEP KUMAR G S ,ANURAG SHINDE,YASH YADAV,GURUMOORTHY S HEBBAR
Title of Article Investigations on Slurry Erosive on Wear Performance of HVOF-Sprayed Cr2O3 Coatings on Aluminum Alloy
Name of Journal Journal of Bio- and Tribo-Corrosion
Volume No 106
Issue No 7
Page No -
URL https://link.springer.com/article/10.1007%2Fs40735-021-00543-2
Indexing Agency Scopus
Date of Publication 02-Jun-2021
8 Optimization of biodiesel production from waste cooking oil by Box Behnken design using Response Surface Methodology International Journal of Renewable Energy Research 01-Mar-2021 11 / 1 / -

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) KIRAN K,GURUMOORTHY S HEBBAR
Title of Article Optimization of biodiesel production from waste cooking oil by Box Behnken design using Response Surface Methodology
Name of Journal International Journal of Renewable Energy Research
Volume No 11
Issue No 1
Page No -
URL https://www.ijrer.org/ijrer/index.php/ijrer
Indexing Agency Scopus
Date of Publication 01-Mar-2021
9 A Comparative Analysis of Biodiesel Properties Derived from Meat Stall Wastes through Optimized Parameters IOP Conference Series: Materials Science and Engineering 16-Feb-2021 1065 / / 1-11

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) RAVIKUMAR R,KIRAN K,HARISH KUMAR M,GURUMOORTHY S HEBBAR,A S DIVAKARA SHETTY
Title of Article A Comparative Analysis of Biodiesel Properties Derived from Meat Stall Wastes through Optimized Parameters
Name of Journal IOP Conference Series: Materials Science and Engineering
Volume No 1065
Issue No
Page No 1-11
URL https://iopscience.iop.org/article/10.1088/1757-899X/1065/1/012005/meta
Indexing Agency Scopus
Date of Publication 16-Feb-2021
10 Friction and wear behaviour of HVOF sprayed Cr2O3-TiO2 coatings on aluminium alloy International Journal of Materials Engineering Innovation 16-Feb-2021 12 / 1 / 1-17

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) KIRAN K,PRADEEP KUMAR G S ,R KESHAVAMURTHY,M PRABHU AKHIL,MERVIN J THOMAS,VIJAY TAMBRALLIMATH,GURUMOORTHY S HEBBAR
Title of Article Friction and wear behaviour of HVOF sprayed Cr2O3-TiO2 coatings on aluminium alloy
Name of Journal International Journal of Materials Engineering Innovation
Volume No 12
Issue No 1
Page No 1-17
URL https://www.inderscience.com/info/inarticle.php?artid=113213
Indexing Agency Scopus
Date of Publication 16-Feb-2021
11 A study of diesel and Pongamia Pinnata biodiesel combustion in compression ignition engines using zero-dimensional modelling and experimental methods International Journal of Ambient Energy 12-Oct-2020 / / 1-10

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) KIRAN K,NIRMAL JOSE,RAVIKUMAR R,GURUMOORTHY S HEBBAR
Title of Article A study of diesel and Pongamia Pinnata biodiesel combustion in compression ignition engines using zero-dimensional modelling and experimental methods
Name of Journal International Journal of Ambient Energy
Volume No
Issue No
Page No 1-10
URL https://www.tandfonline.com/doi/full/10.1080/01430750.2020.1831596
Indexing Agency Scopus
Date of Publication 12-Oct-2020
12 Experimental Analysis of Biofuel Produced from Fat Derivatives of Bird and Animal as an Additive Fuel in CI Engine International Journal of Renewable Energy Research 23-Sep-2020 10 / 3 / 1226-1233

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) RAVIKUMAR R,KIRAN K,GURUMOORTHY S HEBBAR
Title of Article Experimental Analysis of Biofuel Produced from Fat Derivatives of Bird and Animal as an Additive Fuel in CI Engine
Name of Journal International Journal of Renewable Energy Research
Volume No 10
Issue No 3
Page No 1226-1233
URL https://www.ijrer.org/ijrer/index.php/ijrer/article/view/11203
Indexing Agency Scopus
Date of Publication 23-Sep-2020
13 Numerical analysis and finite element simulation of axial stiffness of overhead transmission line conductor International Journal of Mechanical and Production Engineering Research and Development 30-Apr-2020 10 / 2 / 463-475

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) HADIYA PRITESH DULABHAI,PARTHASARATHY N S,GURUMOORTHY S HEBBAR
Title of Article Numerical analysis and finite element simulation of axial stiffness of overhead transmission line conductor
Name of Journal International Journal of Mechanical and Production Engineering Research and Development
Volume No 10
Issue No 2
Page No 463-475
URL http://www.tjprc.org/publishpapers/2-67-1599207420-2-67-1599136092-50IJMPERDAPR202050.pdf
Indexing Agency Scopus
Date of Publication 30-Apr-2020
14 Extraction and Characterization of Biofuel from Industrial Waste organic Pupae-Silkworm International Journal of Recent Technology and Engineering (IJRTE) 30-Sep-2019 8 / 3 / 1603-1607

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) RAVIKUMAR R,HARISH KUMAR M,KIRAN K,GURUMOORTHY S HEBBAR
Title of Article Extraction and Characterization of Biofuel from Industrial Waste organic Pupae-Silkworm
Name of Journal International Journal of Recent Technology and Engineering (IJRTE)
Volume No 8
Issue No 3
Page No 1603-1607
URL https://www.ijrte.org/wp-content/uploads/papers/v8i3/C4422098319.pdf
Indexing Agency Scopus
Date of Publication 30-Sep-2019
15 Experimental Augmentation of Heat Transfer in a Shell and Tube Heat Exchanger using Twisted Tape with baffles and hiTrain Wire Matrix Inserts ? A Comparative Study IOP Conference Series: Materials Science and Engineering 27-Jun-2018 376 / 01 / 1-8

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Co-Author
Author Name (s) KIRAN K,GURUMOORTHY S HEBBAR,RAMAN BEDI,MANOJ,A M MULLA
Title of Article Experimental Augmentation of Heat Transfer in a Shell and Tube Heat Exchanger using Twisted Tape with baffles and hiTrain Wire Matrix Inserts ? A Comparative Study
Name of Journal IOP Conference Series: Materials Science and Engineering
Volume No 376
Issue No 01
Page No 1-8
URL http://iopscience.iop.org/article/10.1088/1757-899X/376/1/012003
Indexing Agency Scopus
Date of Publication 27-Jun-2018
16 Control of Noxfrom a Di Diesel Engine with Hot Egr and Ethanol Fumigation: An Experimental Investigation International Journal of Automotive Technology 05-Sep-2013 14 / 03 / 333-341

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Sole
Author Name (s) GURUMOORTHY S HEBBAR
Title of Article Control of Noxfrom a Di Diesel Engine with Hot Egr and Ethanol Fumigation: An Experimental Investigation
Name of Journal International Journal of Automotive Technology
Volume No 14
Issue No 03
Page No 333-341
URL http://www.springerlink.com/openurl.asp?genre=article&id=doi:10.1007/s12239-013-0037-8
Indexing Agency Scopus
Date of Publication 05-Sep-2013
17 Effect of Exhaust Gas Recirculation Temperature on the Emission and Performance of a Single Cylinder Naturally Aspirated Stationary Diesel Engine International Journal of Applied Engineering Research 08-Aug-2012 4 / 11 / 2115-2124

Additional information

Category Article in Research Journal
Sole Authored /Co Authored Sole
Author Name (s) GURUMOORTHY S HEBBAR
Title of Article Effect of Exhaust Gas Recirculation Temperature on the Emission and Performance of a Single Cylinder Naturally Aspirated Stationary Diesel Engine
Name of Journal International Journal of Applied Engineering Research
Volume No 4
Issue No 11
Page No 2115-2124
URL http://www.ripublication.com/ijaer.htm
Indexing Agency Scopus
Date of Publication 08-Aug-2012
Sl.No. Title URL Subject Month Year
Sl.No. Type of Book Title Title of Book ISBN Month Year
1 Conference Proceedings 2020 Fifth International Conference on Research in Computational Intelligence and Communication Networks (ICRCICN) Research in Computational Intelligence and Communication Networks 978-1-7281-8818-8 Dec 2020

Additional information

Type of Book Conference Proceedings
Type of Work Book
Sole Authored/Co Authored Co-Editor
Author Name (s) DEBABRATA SAMANTA,BENNY THOMAS,IVEN JOSE,JOSEPH VARGHESE ,INBANILA K,BALACHANDRAN K,GURUMOORTHY S HEBBAR,REGHUNANDAN KUMAR R,JOSEPH RODRIGUES,VARAPRASAD JANAMALA,ANEESH,SUSHANTH G
Title of Book 2020 Fifth International Conference on Research in Computational Intelligence and Communication Networks (ICRCICN)
Title of Book/Chapter/Article/Case Study) Research in Computational Intelligence and Communication Networks
Month/Year Dec/2020
ISBN 978-1-7281-8818-8
Pages
Publishing Company/Institution IEEE
Indexing Agency Scopus
Level International publisher
Sl.No. Type of Book Title of Chapter/Article ISBN Month Year
1 Text book Development of high performance polymer composites by additive manufacturing 9781668460092 May 2023

Additional information

Type of Book Text book
Type of Work Chapter
Sole Authored/Co Authored Co-Authored
Author Name (s) JANGAM SASIDHAR,PRADEEP KUMAR G S ,SACHITH T.S,SHIVAKUMAR S,GURUMOORTHY S HEBBAR
Title of Book Development, Properties, and Industrial Applications of 3D Printed Polymer Composites
Title of Book/Chapter/Article/Case Study) Development of high performance polymer composites by additive manufacturing
Month/Year May/2023
ISBN 9781668460092
Pages 220 - 238
Publishing Company/Institution igi-global
Indexing Agency Scopus
Level International publisher
2 Conference Proceedings Evaluation of Maximum Bending Stiffness of Stranded Cables with Refined Kinematic Relations 978-981-19-4208-2 Aug 2022

Additional information

Type of Book Conference Proceedings
Type of Work Chapter
Sole Authored/Co Authored Co-Authored
Author Name (s) HADIYA PRITESH DULABHAI,PARTHASARATHY N S,GURUMOORTHY S HEBBAR,MITHILESH K. DIKSHIT
Title of Book Advances in Manufacturing Engineering.
Title of Book/Chapter/Article/Case Study) Evaluation of Maximum Bending Stiffness of Stranded Cables with Refined Kinematic Relations
Month/Year Aug/2022
ISBN 978-981-19-4208-2
Pages 353?366
Publishing Company/Institution Springer, Singapore
Indexing Agency Scopus
Level International publisher
3 Conference Proceedings Improvised Model for Estimation of Cable Bending Stiffness Under Various Slip Regimes. 978-981-19-4208-2 Aug 2022

Additional information

Type of Book Conference Proceedings
Type of Work Chapter
Sole Authored/Co Authored Co-Authored
Author Name (s) HADIYA PRITESH DULABHAI,PARTHASARATHY N S,GURUMOORTHY S HEBBAR,MITHILESH K. DIKSHIT
Title of Book Advances in Manufacturing Engineering.
Title of Book/Chapter/Article/Case Study) Improvised Model for Estimation of Cable Bending Stiffness Under Various Slip Regimes.
Month/Year Aug/2022
ISBN 978-981-19-4208-2
Pages 389 - 402
Publishing Company/Institution Springer, Singapore
Indexing Agency Scopus
Level International publisher
Sl.No. Type of Book Title Title of Case Study ISBN Month Year
Sl.No. Title Abstract Objectives Type Sponsors
Sl.No. Title Place of Publication ISBN No. Month Year
Sl.No. Type of Program Role Name of Program Title of Paper Date Organising Institution Level
1 Conference Participant ASME MEEd 01/04/2023 Americal Society for Mech Engineers-ASME International
2 Conference Presenter SECOND INTERNATIONAL CONFERENCE On Advanced Materials For Health, Energy And Environment (AMHEE-2023) Fuzzy Modelling and NSGA-II Optimisation Technique in Biodiesel Production 28/02/2023 JSS Science and Technology University International
3 Seminar Organizer AICTE-DCP Lecture Series 21/01/2023 AICTE National
4 Conference Presenter International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences 2022 Evaluation of Maximum bending stiffness of stranded cables with refined kinematic relations 20/01/2022 IITRAM. Near Khokhara Circle, Maninagar East, Ahmedabad, Gujarat 380026 International
5 Conference Presenter International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences 2022 improvised model for estimation of cable bending stiffness under various slip regimes 20/01/2022 IITRAM, Ahmedabad, Gujarat 380026 International
6 Conference Presenter International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences Evaluation of maximum bending stiffness of stranded cables with refined kinematic relations 20/01/2022 IITRAM, Ahmedabad, India International
7 Conference Presenter International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences Improvised model for estimation of cable bending stiffness under various slip regimes. 20/01/2022 IITRAM, Ahmedabad, India International
8 Conference Presenter International Conference on Frontiers in Engineering Technology Science A Comparative Analysis of Biodiesel Properties Derived from Meat Stall Wastes through Optimized Parameters 18/12/2020 Yenepoya Institute of Technology, Moodbidri, Mangaluru International
9 Conference Co-presenter RECYCLE 2020-3rd International Conference on Waste Management 13/02/2020 IIT Guwahati International
10 Conference Presenter Advances in Materials, Ceramics & Engineering Sciences Valorisation of waste cooked oil and fresh pond algae 17/01/2020 Dayananda Sagar College of Engineering, Bengaluru, Karnataka International
11 Conference Co-presenter International Conference on Advances in Materials, Ceramics and Engineering Sciences 17/01/2020 Dayananda Sagar College of Engineering, Bengaluru International
12 Conference Presenter Advance in materials, Ceramics and Engineering Sciences Numerical Analysis of Indian Multilayered Conductor Under and an Influence of Axial Load 17/01/2020 Dayananda Sagar College of Engineering International
13 Conference Co-presenter Advances in Materials, Ceramics & Engineering Sciences Bioethanol Production from Bamboo by Enzymatic Saccharification followed by Fermentation 17/01/2020 Dayananda Sagar College of Engineering, Bengaluru, Karnataka International
14 Conference Presenter International Conference on Advances in Materials ,Ceramics and Engineering Sciences Numerical Analysis Of Indian Multilayer Conductors Under An Influence Of Axial Load 17/01/2020 Dayanand Sagar College of Engineering International
15 Conference Presenter International Conference on Advances in Materials, Ceramics and Engineering Sciences A Comparative Analysis of Physical and Chemical Properties of Biofuel from Non-Edible oils, Skin Wastes with Pyrolysis oil. 17/01/2020 Dayananda Sagar College of Engineering, Bangaluru International
16 Conference Moderator/Chair International Conference on Innovations and Challenges in Science and Technology (ICICST-2019) 19/12/2019 Donbosco Institute Of Technology International
17 Conference Participant 6thInternational Conference on Issues and Challenges in Doctoral Research 25/08/2018 Christ University International
18 Conference Moderator/Chair International Conference on Advances in Materials and Manufacturing Applications 17/08/2018 Amrita Vishwa Vidyapeetham University, Bengaluru International
19 Conference Co-presenter International Conference on Advances in Manufacturing, Materials and Energy Engineering (IConMMEE2018) Experimental Augmentation of Heat Transfer in a Shell and Tube Heat Exchanger using Twisted Tape with baffles and hiTrain Wire Matrix Inserts ? A Comparative Study 02/03/2018 Mangalore Institute of Technology and Engineering International
20 Conference Participant E SAIL:A Transformational Next Generation Pedagogy 01/03/2018 Christ University International
21 Conference Moderator/Chair National Conference 23/02/2018 Christ University National
22 Conference Co-presenter Emerging Research in Civil Aeronautical & Mechanical Engineering Evaluation of corrosion mechanics of silicon carbide and fly ash reinforced hybrid aluminium metal matrix composites 21/07/2017 Nitte Meenakshi Institute of Technology International
23 Conference Moderator/Chair International conference on Advances in Materials and Manufacturing Applications" 17/04/2017 Amrita school of engineering, Bangalore International
24 Conference Participant National Conference on Mechanical Engineering and Emerging Technologies 27/02/2017 Christ University National
25 Conference Moderator/Chair Professional Improvement Programme 09/02/2017 ARAI and CU Faculty of Engineering National
26 Conference Moderator/Chair Virtual BAJA 2016 24/06/2016 Christ University National
27 Participant ?Noise, Vibration & Acoustics-Theory and Applicati ?Noise, Vibration & Acoustics-Theory and Application? - R V College of Engineering Bangalore National
28 Participant INNOVATIVE TRENDS ON UTILISATION OF FLY ASH INNOVATIVE TRENDS ON UTILISATION OF FLY ASH - Mechanical Engg Department National
29 Participant Advanced Robotics Advanced Robotics - Mechanical Engineering Department National
30 Participant Effective Teaching Pegagogies for Technical Colleg Effective Teaching Pegagogies for Technical College Teachers - S.G. Balekundri Institute of Technology-Belgaum National
31 Participant International Conference on Advanced Materials for International Conference on Advanced Materials for Energy and Environment - Indian Ceramic Society International
Sl.No. Title of the Program Name of the Program Date Name of the Institution
1 ?OBE and NBA ?Enhancing Quality Teaching Strategies through Outcome Based Education 03/03/2021 Internal Quality Assurance Cell (IQAC),
2 Academic Departments Making a Difference: INTERNATIONALIZATION, RESEARCH AND GRADUATE ATTRIBUTES? FDP-II, OBT 24/11/2016 Christ University, Faculty of Engineering
3 General Aspects of Technical Paper Writing QIP 26/09/2016 Christ University, Faculty of Engineering
4 LAWS OF THERMODYNAMICS and ENTROPY THERMODYN 15 12/02/2015 SAMBHRAM INSTITUTE OF TECHNOLOGY-BANGALORE
5 CONCEPTS OF FLUID MECHANICS QIP on Computer Application of Fluid Dynamics 20/01/2015 CUFE-BANGALORE
6 Concepts of Thermodynamics WORK SHOP 08/11/2014 PNS Institute of Technology
7 Concepts of Thermodynamics One Day Work Shop on THERMODYNAMICS 08/11/2014 INSTITUTE OF TECHNOLOGY, Bangalore
Sl.No. Title Genre Producer Copyrights
Sl.No. Title Guide Name Institution Month Year
1 Studies on Exhaust Emission Reduction Strategies for a Single Cylinder Direct Injection Compression Ignition Engine Dr Ananth Krishna Bhat VTU-Balgaum, Karnataka April 2014
Sl.No. Title Name of Student Institution Month Year
1 Experimental Investigation on Performance of a Domestic Refrigerator using R152A and R430A as an Alternate to R134A A Bhaskaran Kalavani College of Technology -Coiembetore
2 performance analysis of a methanol fueled compression ignition engine Mr A Satyanarayana VTU-BELGAUM
3 STUDIES ON COMBUSTION AND PERFORMANCE OF A MODIFIED DI DIESEL ENGINE FOR BIOFUEL KEERTI KUMAR N VTU, BELGAUM
4 Process Optimization and Experimental Investigation of Fourth Generation Biofuel on a Multi-Fuel Engine KIRAN K Christ University August 2016
5 Static Response of a helically wound cables under bending Hadiya Pritesh Christ University July 2017
6 EXPERIMENTAL INVESTIGATION ON THE INFLUENCE OF MULTIWALLED CARBON NANOTUBE AS COMPOSITE ANODES TO ENHANCE THE PERFORMANCE OF LITHIUM ION BATTERIES Vivek K Christ University July 2017
7 `ENERGY MANAGEMENT STUDIES ON SMAKK AND MEDIUM SCALE ENTERPRISES IN KARNATAKA SHANKAR NAIK University B.D.T. College of Engineering
8 Conceptual design and Development of injected 2 stroke cycle SI engine with improved scavenging Kiran Goud VTU-Belagavi
9 Energy Management Studies to Optimise Performance of Agricultural and Garment Clusters of Small and Medium Scale Enterprises in North Karnataka - A Case Study SHANKARA NAIK VTU Belagavi
10 EXPERIMENTAL INVESTIGATIONS OF PERFOMANCE AND EMISSION CHARECTERISTICS ON A DOUBLE SPARK IGNITION ENGINE USING N-BUTENOL RAVIKUMAR R VTU BELAGAVI
11 Some Studies Related To Improving Performance Of Diesel Engines Using Pre-Heated Fuel VIJAYA VTU Belagavi
12 EVALUATION OF BENDING STIFFNESS OF TRANSMISSION LINE CONDUCTORS HADIYA PRITESH DULABHAI Christ University August 2024
Sl.No. Title of Invention Inventor(s) Filing Date
1 AUTOMATED FOOD SERVING ROBOT PALPANDIAN P,ABHINANDHAN N, KARNIKA JAIN,JANGAM SASIDHAR,GURUMOORTHY S HEBBAR 01-Mar-2024

Additional information

Title of Invention AUTOMATED FOOD SERVING ROBOT
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) PALPANDIAN P,ABHINANDHAN N, KARNIKA JAIN,JANGAM SASIDHAR,GURUMOORTHY S HEBBAR
Type of Specification Complete
Type of Patent
Granted/Awarded Date 11-Jul-2024
Publication/Application Date 11-Jul-2024
Application/Filing Date 01-Mar-2024
IPC Number
Publication Number 409334-001
Patent Number 409334-001
Field of Invention ROBOTICS, AUTOMATION, DESIGN
2 COMPACT FIXTURE ASSEMBLY FOR FRICTION STIR WELDING JANGAM SASIDHAR,ANIL RAJ,GURUMOORTHY S HEBBAR 05-Jan-2024

Additional information

Title of Invention COMPACT FIXTURE ASSEMBLY FOR FRICTION STIR WELDING
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) JANGAM SASIDHAR,ANIL RAJ,GURUMOORTHY S HEBBAR
Type of Specification Complete
Type of Patent
Granted/Awarded Date 12-Apr-2024
Publication/Application Date 12-Apr-2024
Application/Filing Date 05-Jan-2024
IPC Number
Publication Number 403861-001
Patent Number 403861-001
Field of Invention Design and Analysis
3 SOFA HADIYA PRITESH DULABHAI,GURUMOORTHY S HEBBAR,AJAI CHANDRAN C K,THEERTHA SWAROOP,ANANTAPADMAM BUILDERS PVT. LTD.,SHAHAZAD,D JOSHUA DANIEL,TUSHAR VISHWAKARMA,NIKITA BORA,G S CHANDRASUDAN 11-Dec-2023

Additional information

Title of Invention SOFA
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) HADIYA PRITESH DULABHAI,GURUMOORTHY S HEBBAR,AJAI CHANDRAN C K,THEERTHA SWAROOP,ANANTAPADMAM BUILDERS PVT. LTD.,SHAHAZAD,D JOSHUA DANIEL,TUSHAR VISHWAKARMA,NIKITA BORA,G S CHANDRASUDAN
Type of Specification Complete
Type of Patent
Granted/Awarded Date 23-Feb-2024
Publication/Application Date 11-Dec-2023
Application/Filing Date 11-Dec-2023
IPC Number
Publication Number 401827-001
Patent Number 401827-001
Field of Invention Design of Furniture
4 Performance of diesel engine enhanced by employing 150µm to 170µm thick plasma sprayed 8YSZ nano grained coating on piston head GOWTHAM SANJAI S,KIRAN K,PARVATI RAMASWAMY,GURUMOORTHY S HEBBAR 09-Jun-2022

Additional information

Title of Invention Performance of diesel engine enhanced by employing 150µm to 170µm thick plasma sprayed 8YSZ nano grained coating on piston head
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) GOWTHAM SANJAI S,KIRAN K,PARVATI RAMASWAMY,GURUMOORTHY S HEBBAR
Type of Specification Provisional
Type of Patent
Granted/Awarded Date
Publication/Application Date 17-Jun-2022
Application/Filing Date 09-Jun-2022
IPC Number
Publication Number 24/2022
Patent Number Not Known
Field of Invention Materials Technology
5 Bio-derived fuels as diesel fuel and gasoline blend components RAVIKUMAR R,KIRAN K,GURUMOORTHY S HEBBAR 08-Jun-2022

Additional information

Title of Invention Bio-derived fuels as diesel fuel and gasoline blend components
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) RAVIKUMAR R,KIRAN K,GURUMOORTHY S HEBBAR
Type of Specification Provisional
Type of Patent
Granted/Awarded Date 17-Jun-2022
Publication/Application Date 17-Jun-2022
Application/Filing Date 08-Jun-2022
IPC Number
Publication Number 202241032675
Patent Number 202241032675
Field of Invention Computer Science
6 AUTOMATED PAINTING MACHINE JANGAM SASIDHAR,UMESH V,SHIVAKUMAR S,GURUMOORTHY S HEBBAR,ANSHUL DAHIYA (2067201),SYED MOHAMMED K (2067204) 01-Apr-2022

Additional information

Title of Invention AUTOMATED PAINTING MACHINE
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) JANGAM SASIDHAR,UMESH V,SHIVAKUMAR S,GURUMOORTHY S HEBBAR,ANSHUL DAHIYA (2067201),SYED MOHAMMED K (2067204)
Type of Specification Complete
Type of Patent
Granted/Awarded Date 16-Mar-2023
Publication/Application Date 17-Mar-2022
Application/Filing Date 01-Apr-2022
IPC Number
Publication Number 11-2023
Patent Number 361723-001
Field of Invention MECHANICAL DESIGN
7 Development of HVOF-sprayed TiO2-Cr2O3 composite coatings on aluminum dies used in the production of Areca Leaf plates PRADEEP KUMAR G S ,KESHAVAMURTHY R,GURUMOORTHY S HEBBAR,VIJAY TAMBRALLIMATH 11-Jan-2022

Additional information

Title of Invention Development of HVOF-sprayed TiO2-Cr2O3 composite coatings on aluminum dies used in the production of Areca Leaf plates
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) PRADEEP KUMAR G S ,KESHAVAMURTHY R,GURUMOORTHY S HEBBAR,VIJAY TAMBRALLIMATH
Type of Specification Provisional
Type of Patent
Granted/Awarded Date
Publication/Application Date 28-Jan-2022
Application/Filing Date 11-Jan-2022
IPC Number
Publication Number 202241001377
Patent Number 202241001377
Field of Invention BIOTECHNOLOGY
8 Processing Low-Cost Feedstock?s into High Quality Biodiesel with a Novel Chemical Multi-Functional Process Intensifier Method RAVIKUMAR R,KIRAN K,GURUMOORTHY S HEBBAR,JANGAM SASIDHAR,RAMESHA K,HARISH KUMAR M,UMESH V 24-Dec-2021

Additional information

Title of Invention Processing Low-Cost Feedstock?s into High Quality Biodiesel with a Novel Chemical Multi-Functional Process Intensifier Method
Applicant/Co-Applicant
Applicant (s)
Inventor /Co-Inventor
Inventor (s) RAVIKUMAR R,KIRAN K,GURUMOORTHY S HEBBAR,JANGAM SASIDHAR,RAMESHA K,HARISH KUMAR M,UMESH V
Type of Specification Provisional
Type of Patent
Granted/Awarded Date
Publication/Application Date 07-Jan-2022
Application/Filing Date 24-Dec-2021
IPC Number
Publication Number 202141060717
Patent Number 202141060717
Field of Invention CHEMICAL
Sl.No. Name of the Research Project Investigator(s) Sponsors Internal/External
1 EXPERIMENTAL STUDIES ON RENAULT–NISSAN 65 HP CLASS FOUR CYLINDER DIESEL ENGINE Internal
2 EXPERIMENTAL INVESTIGATION ON PERFORMANCE AND EMISSION CHARACTERISTICS OF AN ALTERNATE FUEL ENGINE Christ University, Internal
3 Experimental Investigation on Performance and Emission Characteristics of An Alternative Fuel Engine GURUMOORTHY S HEBBAR, KIRAN K Internal
4 Biodiesel from cooked vegetable oil GURUMOORTHY S HEBBAR Internal
5 Fabrication of Advanced Ceramic Nanocoatings for Automotive Applications PARVATI RAMASWAMY, GOWTHAM SANJAI S,GURUMOORTHY S HEBBAR Ministry of Mines External
6 Fabrication of Advanced Ceramic Nano coatings for Automotive Applications PARVATI RAMASWAMY, GURUMOORTHY S HEBBAR,KIRAN K,GOWTHAM SANJAI S Ministry of Mines, Govt. of India External
7 Laboratory Scale Synthesis and Characterization of Solid State Materials for Energy Storage Services: A feasibility study REGHU V R, FRANCIS XAVIER L,BENSON K MONEY,GURUMOORTHY S HEBBAR,PARVATI RAMASWAMY Internal
Sl.No. Name of the Conference/Seminar Name of Organiser Level Date
Sl.No. Name of the Workshop/FDP/Training programme Name of Oraganiser Level Role Date
1 ACADEMIC AUDIT kit kOLHAPUR Invited Resource Person/Trainer 26/01/2024
2 Advanced Industry Powered Faculty Immersion Program LnT Edutech National Participant 29/05/2023
3 Mechanical Engineering Education Summit-MEED ASME International Participant 01/04/2023
4 Prevention, Prohibition and Redressal of Sexual Harrasement Institutional Participant 14/02/2023
5 Building of ROBO and DRONES Department of Mechanical Engineering Institutional Organiser & Participant 09/02/2023
6 Global Benchmarking HRDC and IQAC CHRIST Institutional Participant 04/01/2023
7 FDP on Design Thinking Human Resource Development-CHRIST UNIVERSITY Institutional Participant 15/12/2022
8 Designing Course Outcomes and Outcomes Inpods Faculty Commons National Participant 14/12/2022
9 Designing Course Outcomes and Outcome Focused Questions Inpods National Participant 14/12/2022
10 Interdisciplinary Approaches and Adopting the Transition Department of Mechanical Engineering Institutional Organiser & Presenter 27/05/2022
11 Accreditation and Strategic Building Department of Mechanical Engineering Institutional Organiser & Presenter 24/03/2022
12 Education Made At CHRIST CHRIST Institutional Participant 14/03/2022
13 Leader, A Fellow sufferer who understands CHRIST Leadership Development Programme Institutional Participant 08/03/2022
14 The Art of Doing Research Jyothi Engineering College, Thrissur, India, CHRIST (Deemed to be University), Bangalore, India and Pelita Bangsa University, Indonesia International Participant & Presenter 12/07/2021
15 Sustainable Opportunities for Faculty in post covid Scenario Magestic Technologies Solutions Pvt Ltd International Participant 26/06/2020
16 Introduction to Thermodynamics: Transferring Energy from Here to There International Participant 14/06/2020
17 Online Teaching Academic Staff College CHRIST Participant 22/04/2020
18 Learning to Teach Online International Participant 05/02/2020
19 Constructive Alignment in Outcome Based Education Teaching Learning Enhancement Cell CHRIST (Deemed to be University), Bangalore Institutional Participant 12/09/2019
20 Research and Modern Tools usage Faculty of Engineering-Mechanical Engineering Institutional Organiser & Participant 30/05/2019
21 Teaching Pedagogy and evaluation process in outcome based education Department of Mechanical Engineering Organiser & Presenter 20/05/2019
22 Fuel Cell Technology Faculty of Engineering Institutional Organiser & Participant 17/12/2018
23 INTELLECTUAL PROPERTY RIGHTS (IPR) MECHANICAL AND AUTOMOBILE ENGINEERING DEPARTMENT Institutional Organiser & Participant 06/08/2018
24 Springer Nature Writing and Publication Workshop Faculty of Engineering, CHRIST (Deemed to be University) Institutional Participant 12/06/2018
25 Frontier areas in the subject and curriculum updation Academic Staff College-CHRIST(DEEMED TO BE UNIVERSITY) Organiser & Participant 21/05/2018
26 Workshop-on Ceramics and Advanced Materials for Space Applications ISRO ISRO ISAC Satellite Centre, HAL Airport Road, Bangalore National Participant 21/02/2018
27 Teaching, Learning and Evaluation Mechanical Engg Dept Organiser & Presenter 24/05/2017
28 Bosch Automotive Wokshop Training Mechanical Engineering Department Institutional Organiser & Participant 08/10/2016
29 Research- Trends, Tools and Processes Mechanical Engineering Department Organiser & Presenter 24/09/2016
30 Creo 3.0 Mechanical Engineering Institutional - 12/09/2016
31 Research Enablers And Its Thrust Areas Mechanical Engineering Department Organiser & Participant 23/05/2016
32 SolidWorks Mechanical Engineering Institutional - 28/01/2016
33 3D Printing Mechanical Engineering - 05/10/2015
34 Bilateral International Workshop on ?Material Processing ? Christ University Faculty of Engineering & Shanghai Jiao Tong University In association with NRC-M, UGC-Centre, IISc, Bangalore International - 04/02/2015
35 ANSYS 14.0 Mechanical Engineering Department Institutional - 23/01/2015
36 Training on Abaqus CU Academic Staff College - 27/10/2014
37 QIP Programme CU-Academic Staff College Institutional - 20/01/2014
38 Trainining on Automation-Pneumatic Faculty of Engineering and Festo Institutional - 15/01/2013
39 Trainining on Automation-Hydraulic Festo Institutional - 29/10/2012
Sl.No. Name of the Awards/Achievements/Others Description Organisation Month/ Year
1 SAE INDIA award for Valuable Contribution for the last 25 years SAEINDIA 11 October 2022
2 Organiser For Reev Saeindia Finals Acknowleledgement for hosting REEV SAEINDIA finals at Kengeri campus-National level electric vehicle racing competition SAEINDIA 07 January 2023
Sl.No. Faculties Theme of Consultancy Type
Sl.No. Applicants Title Date Published

CHRIST

(Deemed to be University)

Dharmaram College Post, Hosur Road, Bengaluru - 560029,
Karnataka, India

Tel: +91 804012 9100 / 9600

Fax: 40129000

Email: mail@christuniversity.in

Web: http://www. christuniversity.in

Vision

EXCELLENCE AND SERVICE

Mission

CHRIST (Deemed to be University) is a nurturing ground for an individual's holistic development to make effective contribution to the society in a dynamic environment.

Copyright © CHRIST (Deemed to be University) 2020 | Privacy Policy