Faculty

Profile

THEJARAJU R

BE, MTech
ASSISTANT PROFESSOR


MECHANICAL AND AUTOMOBILE ENGINEERING
SCHOOL OF ENGINEERING AND TECHNOLOGY
KENGERI CAMPUS

Name Programme Institution Year of Passing
PG MTech Visveswaraiah Technological University 2011
Degree BE Visveswaraiah Technological University 2009
PhD Pursuing (2017) Visveswaraiah Technological University 0
Sl.No. Title Name of Periodical Periodicity Date
Sl.No. Title Name of Journal Date of Publication Volume No/Issue No/Page No
1 Progressive Damage Characterization of Biaxial Glass Fiber Reinforced Epoxy Composites International Journal of Advanced Research in Engineering and Technology 02-Feb-2021 12 / 2 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) THEJARAJU R,SHIVAKUMAR S
Title of Article Progressive Damage Characterization of Biaxial Glass Fiber Reinforced Epoxy Composites
Name of Journal International Journal of Advanced Research in Engineering and Technology
Volume No 12
Issue No 2
Page No
URL http://www.iaeme.com/IJARET/index.asp
Date of Publication 02-Feb-2021
2 Experimental investigation of turbulent flow behavior in an air to air double pipe heat exchanger using novel para winglet tape Case Studies in Thermal Engineering 01-Dec-2020 22 / /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) THEJARAJU R,THEJARAJU R,GIRISHA KB,S H MANJUNATH,B S DAYANANDA
Title of Article Experimental investigation of turbulent flow behavior in an air to air double pipe heat exchanger using novel para winglet tape
Name of Journal Case Studies in Thermal Engineering
Volume No 22
Issue No
Page No
URL https://www.sciencedirect.com/science/article/pii/S2214157X20305335?via%3Dihub
Date of Publication 01-Dec-2020
3 Modeling and computational fluid dynamic analysis on a non‐AC bus coach system Heat Transfer-Asian Research 05-Jul-2020 49 / 8 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) MANJUNATHA S,NIRANJANA S J,SHIVAKUMAR S,THEJARAJU R
Title of Article Modeling and computational fluid dynamic analysis on a non‐AC bus coach system
Name of Journal Heat Transfer-Asian Research
Volume No 49
Issue No 8
Page No
URL https://onlinelibrary.wiley.com/journal/26884542
Date of Publication 05-Jul-2020
4 Automating the CFD analysis of Reefer Truck using PyFoam International Journal of Recent Technology and Engineering (IJRTE) 30-Mar-2020 8 / 6 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) ANIL MELWYN REGO,THEJARAJU R
Title of Article Automating the CFD analysis of Reefer Truck using PyFoam
Name of Journal International Journal of Recent Technology and Engineering (IJRTE)
Volume No 8
Issue No 6
Page No
URL https://www.ijrte.org/download/volume-8-issue-6/
Date of Publication 30-Mar-2020
5 Antiwear Performance Evaluation of Halloysite Nanotube (HNT) Filled Polymer Nanocomposites International Journal of Engineering and Advanced Technology (IJEAT) 27-Oct-2019 9 / 1 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) SANTHOSH N,THEJARAJU R,RAVICHANDRAN G
Title of Article Antiwear Performance Evaluation of Halloysite Nanotube (HNT) Filled Polymer Nanocomposites
Name of Journal International Journal of Engineering and Advanced Technology (IJEAT)
Volume No 9
Issue No 1
Page No
URL
Date of Publication 27-Oct-2019
6 Prediction of Indoor Air Circulation of Residential Room with Adaptation of Solar Chimney Using Numerical Technique International Journal of Innovative Technology and Exploring Engineering 12-Sep-2019 8 / 11 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) THEJARAJU R,THEJARAJU R,PUNIT KONGI,T S MADAN KUMAR,PRINCE JOSEPH
Title of Article Prediction of Indoor Air Circulation of Residential Room with Adaptation of Solar Chimney Using Numerical Technique
Name of Journal International Journal of Innovative Technology and Exploring Engineering
Volume No 8
Issue No 11
Page No
URL
Date of Publication 12-Sep-2019
7 A Comprehensive Review on Design and Analysis of Passive Enhancement Techniques in Double Pipe Heat Exchanger International Journal of Scientific & Technology Research 15-Aug-2019 8 / 8 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) THEJARAJU R,THEJARAJU R,DR GIRISHA K B
Title of Article A Comprehensive Review on Design and Analysis of Passive Enhancement Techniques in Double Pipe Heat Exchanger
Name of Journal International Journal of Scientific & Technology Research
Volume No 8
Issue No 8
Page No
URL
Date of Publication 15-Aug-2019
8 A Study of Airfoil Flap Deflection Angle Using CFD Simulation Techniques International Journal of Mechanical and Production Engineering Research and Development 12-Aug-2019 9 / Special Issue /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) THEJARAJU R,THEJARAJU R,DANA JOSE,NIVEDITHA. V. R,,VISHAL SURESH,SUMANTHRAN. A
Title of Article A Study of Airfoil Flap Deflection Angle Using CFD Simulation Techniques
Name of Journal International Journal of Mechanical and Production Engineering Research and Development
Volume No 9
Issue No Special Issue
Page No
URL http://www.tjprc.org/download-coference_files.php?fname=e45823afe1e5120cec11fc4c379a0c67
Date of Publication 12-Aug-2019
9 Experimental Study of Solar Dryer used for Drying Chilly and Ginger AIP Conference Proceedings 08-Mar-2019 2080 / 1 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) THEJARAJU R,THEJARAJU R,RAMAN BEDI,FRANKY FRANCIS,JOJI JOHNY
Title of Article Experimental Study of Solar Dryer used for Drying Chilly and Ginger
Name of Journal AIP Conference Proceedings
Volume No 2080
Issue No 1
Page No
URL https://aip.scitation.org/doi/pdf/10.1063/1.5092910
Date of Publication 08-Mar-2019
10 Optimizing the efficiency of solar flat plate collector with trapezoidal reflector AIP Conference Proceedings 08-Mar-2019 2080 / 1 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) THEJARAJU R,THEJARAJU R,MANOHAR JOEL MURA,RASHMI SHARASTHANTRA,GOTIMAYUM SACHIDEV SHARMA
Title of Article Optimizing the efficiency of solar flat plate collector with trapezoidal reflector
Name of Journal AIP Conference Proceedings
Volume No 2080
Issue No 1
Page No
URL https://aip.scitation.org/doi/pdf/10.1063/1.5092911
Date of Publication 08-Mar-2019
11 Performance and Steady State Heat Transfer Analysis of Functionally Graded Thermal Barrier Coatings Systems Materials Today Proceedings 21-Dec-2018 5 / 14(2) /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) SHANKAR V,PARVATI RAMASWAMY,THEJARAJU R
Title of Article Performance and Steady State Heat Transfer Analysis of Functionally Graded Thermal Barrier Coatings Systems
Name of Journal Materials Today Proceedings
Volume No 5
Issue No 14(2)
Page No
URL https://authors.elsevier.com/a/1YG5C7tbNa9mG4
Date of Publication 21-Dec-2018
12 Numerical Study Of Thermal Performance In A Circular Pipe Using Angle Plate Inserts Directed In Horizontal And Vertical Directions JP Journal of Heat and Mass Transfer 01-Dec-2018 15 / 4 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) THEJARAJU R,THEJARAJU R,RAMAN BEDI,SONAL P JOSEPH,ELDHO PAUL
Title of Article Numerical Study Of Thermal Performance In A Circular Pipe Using Angle Plate Inserts Directed In Horizontal And Vertical Directions
Name of Journal JP Journal of Heat and Mass Transfer
Volume No 15
Issue No 4
Page No
URL http://www.pphmj.com/abstract/12170.htm
Date of Publication 01-Dec-2018
13 Development of Coconut De-husking Machine for Large Scale Production International Journal for Research in Applied Science and Engineering Technology 17-Feb-2018 6 / 2 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) UMESH V,THEJARAJU R
Title of Article Development of Coconut De-husking Machine for Large Scale Production
Name of Journal International Journal for Research in Applied Science and Engineering Technology
Volume No 6
Issue No 2
Page No
URL http://ijraset.com/fileserve.php?FID=13667
Date of Publication 17-Feb-2018
14 CFD ANALYSIS OF SOLAR FLAT PLATE COLLECTOR WITH SEMI CIRCULAR BAFFLES International Journal of Mechanical and Production Engineering 10-May-2017 5 / 5 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) THEJARAJU R,THEJARAJU R,LINTO KURIEN PHILIP,DAVID JOSE,ABINSHA JOSEPH,,ZAIN SHARIFF
Title of Article CFD ANALYSIS OF SOLAR FLAT PLATE COLLECTOR WITH SEMI CIRCULAR BAFFLES
Name of Journal International Journal of Mechanical and Production Engineering
Volume No 5
Issue No 5
Page No
URL http://www.iraj.in/journal/journal_file/journal_pdf/2-375-1500267989105-109.pdf
Date of Publication 10-May-2017
15 EXPERIMENTAL STUDIES, GEOMETRY ACQUISITION AND GRID GENERATION OF DIESEL ENGINE INLET PORT FOR THREE DIMENSIONAL CALIBRATED CFD CODE FOR FUTURISTIC DESIGN Mechanical Engineering: An International Journal 01-Aug-2016 3 / 3 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) THEJARAJU R,SHANKAR V
Title of Article EXPERIMENTAL STUDIES, GEOMETRY ACQUISITION AND GRID GENERATION OF DIESEL ENGINE INLET PORT FOR THREE DIMENSIONAL CALIBRATED CFD CODE FOR FUTURISTIC DESIGN
Name of Journal Mechanical Engineering: An International Journal
Volume No 3
Issue No 3
Page No
URL http://airccse.com/meij/papers/3316meij01.pdf
Date of Publication 01-Aug-2016
16 EXPERIMENTAL STUDIES ON THE INTAKE PORT OF A DIESEL ENGINE TO DETERMINE SWIRL International Journal of Recent advances in Mechanical Engineering (IJMECH) No.5 / No.2 /

Additional information

Category
Sole Authored /Co Authored
Author Name (s) THEJARAJU R, SHANKAR. V
Title of Article EXPERIMENTAL STUDIES ON THE INTAKE PORT OF A DIESEL ENGINE TO DETERMINE SWIRL
Name of Journal International Journal of Recent advances in Mechanical Engineering (IJMECH)
Volume No No.5
Issue No No.2
Page No
URL http://wireilla.com/engg/ijmech/forth.html
Date of Publication
Sl.No. Title URL Subject Month Year
Sl.No. Type of Book Title Title of Book ISBN Month Year
Sl.No. Type of Book Title of Chapter/Article ISBN Month Year
Sl.No. Type of Book Title Title of Case Study ISBN Month Year
Sl.No. Title Abstract Objectives Type Sponsors
Sl.No. Title Place of Publication ISBN No. Month Year
Sl.No. Type of Program Role Name of Program Title of Paper Date Organising Institution Level
1 Conference Presenter The 2nd International Conference on Future Learning Aspects of Mechanical Engineering, AMITY Numerical Analysis of Turbulent Heat Exchanger Tube Using Novel Para Winglet Tape 05/08/2020 Amity University International
2 Conference Participant Virtual International Conference on Bio-inspired Design and Engineering 27/06/2020 Vellore Institute of Technology International
3 Seminar Participant E-Mobility and Solar Charging for E-Mobility 24/06/2020 Chouksey Group of Colleges, Bilaspur National
4 Seminar Participant EV and Energy Storage Devices 20/06/2020 Christ University Institutional
5 Seminar Participant National Level Webinar on Simulation Driven Innovation for e-Mobility 10/06/2020 KLE Technological University, Altair India National
6 Conference Presenter International Virtual Conference on Recent Innovations in Science and Technology Study Of Performance Evaluation Of Novel Para-Winglet Tape In A Turbulent Heat Exchanger Tube 07/05/2020 Transist Online An International Journal National
7 Seminar Participant Seminar on Managing Change 10/02/2020 Christ University Institutional
8 Conference Presenter International Conference on Advanced Research in Mechanical Engineering (IC-ARME2019) A review of passive enhancement techniques in double pipe heat exchanger 19/04/2019 MVJ COLLEGE OF ENGINEERING International
9 Conference Presenter International Conference on Advancements in Mechanical Engineering (ICAME 2019) A Study of Airfoil Flap Design Optimization Using Simulation Techniques 10/04/2019 Jyothi Engineering College, Cheruthuruthy, Thrissur-641032. Kerala, India. International
10 Conference Presenter International Conference and pre conference workshop on emerging trends in mechanical engineering Experimental Study of solar dryer used for drying chilly and ginger 10/08/2018 St. Joseph Engineering College, Mangaluru International
11 Seminar Participant International Convention on Environment Protection Through sustainable waste management 03/08/2018 Christ University International
12 Conference Presenter 4th International Conference on Computational Methods in Engineering and Health Sciences Numerical study of thermal performance in a circular pipe using angle plate inserts directed in horizontal and vertical direction 19/12/2017 Manipal Academy of Higher Education International
13 Seminar Participant National Seminar on Recent Trends in Sustainable and Clean Energy Technologies 17/04/2017 NIE Institute of Technology, Mysore National
14 Symposium Presenter Computational Science Symposium 2017 Machine Learning with RFE and Random Forest Regression to predict Nusselt Number for Perforated Fin Arrays in CFD Analysis 16/03/2017 Indian Institute of Science National
15 Conference Presenter ASIAN SOCIETY FOR ACADEMIC RESEARCH International Conference CFD Analysis of Solar Flat Plate Collector with Semicircular Baffles 12/03/2017 ASIAN SOCIETY FOR ACADEMIC RESEARCH International
16 Conference Participant National Level Conference On Innovative Trends In Mechanical Engineering 27/02/2017 Christ University National
17 Symposium Presenter First National Finite Element Developers/Users Meet Potential Areas of Collaboration 12/12/2016 ISRO, India National
18 Participant NAtional Level Conference on Innovative Trends in NAtional Level Conference on Innovative Trends in Mechanical Engineering - Christ University Faculty of Engineering, Bangalore National
19 Participant 5th National Conference on Emerging Trends in Engi 5th National Conference on Emerging Trends in Engineering Technologies - Jyothy Institute of Technology, Off Kanakpura Road, Bangalore 560082. National
Sl.No. Title of the Program Name of the Program Date Name of the Institution
1 Introduction To CFD Principles And Practices Introduction To CFD Principles And Practices 20/08/2020 Jyothi Engineering College
2 Introduction to Computational Fluid Dynamics and Openfoam Technical Talk 09/11/2017 Rajarajeshwari College of Engineering,
Sl.No. Title Genre Producer Copyrights
Sl.No. Title Guide Name Institution Month Year
Sl.No. Title Name of Student Institution Month Year
Sl.No. Title of Invention Inventor(s) Filing Date
Sl.No. Name of the Research Project Investigator(s) Sponsors Internal/External
Sl.No. Name of the Conference/Seminar Name of Organiser Level Date
Sl.No. Name of the Workshop/FDP/Training programme Name of Oraganiser Level Date
1 Short Term Training Program Vishwakarma Institute of Technology, Pune National 01/03/2021
2 One week faculty development program on Latex Department of Computer Science & Engineering, Lakhmi chand Institute of Technology National 06/07/2020
3 2-Day FDP on Next-Gen Classroom Teaching and Digital Content Creation Department of Computer Science and Engineering Institutional 10/06/2020
4 Energy Conservation and Renewable energy School of Engineering and Technology National 08/06/2020
5 Design of Experiments-An Engineering Perspective(Online Workshop) Journal of Advanced Engineering Research and Power Hexacube India Regional 22/04/2020
6 Powerful Tools for Teaching and Learning: Web 2.0 Tools Coursera International 20/04/2020
7 Learning to Teach Online Coursera International 15/04/2020
8 Digital Manufacturing & Design Coursera International 10/04/2020
9 Introduction to Mechanical Engineering Design and Manufacturing with Fusion 360 Coursera International 06/04/2020
10 Research Methodology and Latex VTU eLearning Centre, Mysuru Regional 14/11/2019
11 FEM and Experiential Vibration Techniques Centre for Post Graduate Studies Regional 11/05/2019
12 Workshop on Fuelcell Technology Faculty of Engineering, CHRIST Institutional 17/12/2018
13 FECULTIX-THE ART OF CREATIVE TEACHING Department of MBA Regional 14/12/2018
14 Workshop on Internet of Things and its Applications VTU, Centre for postgraduate studies, Department of Computer science and engineering Regional 10/12/2018
15 Faculty Improvement Program on Intellectual property rights Department of Mechanical and Automobile Engg Institutional 06/08/2018
16 Frontiers Areas in the subject and curriculum updation Department of Mechanical and Automobile Engg 21/05/2018
17 Two days Faculty Development Program on "R" language for Researcher Department of Aeronautical Engineering Regional 23/01/2018
18 Training the Trainers - FESTO Automation Laboratory Department of Electrical and Mechanical Engineering Institutional 17/01/2018
19 Two day workshop on Manufacturing excellence through Automation & Robotics Department of Mechanical National 02/12/2016
20 StarCCM++ Training on CFD Software Department of Mechanical Engineering Institutional 04/10/2016
21 Research- Trends, Tools and Processes Department of Mechanical Engineering 24/09/2016
22 FDP on BOSCH Equipments Department of Mechanical Engineering Institutional 08/08/2016
23 Research enablers and its trust areas Department of Mechanical Engineering Institutional 23/05/2016
24 Solidworks FDP CHRIST UNIVERSITY FACULTY OF ENGINEERING BANGALORE Institutional 28/01/2016
25 Innovative Trends on Utilization of Fly Ash CHRIST UNIVERSITY FACULTY OF ENGINEERING BANGALORE National 12/02/2014
26 Two Day National workshop on Compurtational Fluid Dynamics Rajarajeshwari College of Engineering, Bangalore National 22/10/2010
Sl.No. Name of the Awards/Achievements/Others Description Organisation Month/ Year

CHRIST

(Deemed to be University)

Hosur Road, Bengaluru - 560029,
Karnataka, India

Tel: +91 804012 9100 / 9600

Fax: 40129000

Email: mail@christuniversity.in

Web: http://www. christuniversity.in

Vision

EXCELLENCE AND SERVICE

Mission

CHRIST (Deemed to be University) is a nurturing ground for an individual's holistic development to make effective contribution to the society in a dynamic environment.

Copyright © CHRIST (Deemed to be University) 2020